CMAINT
CMAINT/4/FILEOPERATION
Message
CMAINT/4/FILEOPERATION: File operation record. (operation="[STRING]", filename="[STRING]", result="[STRING]")
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
operation |
Indicates the file operation type:
|
filename |
Indicates the path and name of the file. |
result |
Indicates the file operation result:
The operation result fail will not be displayed during file deletion. |
Possible Causes
- Failed to create the file.
- There was insufficient storage space on the switch.
- There was a file with the same file name on the switch, and this file cannot be overwritten.
- Failed to upload the file: Check the error code in the notification message received by the controller or error code in diagnostic logs.
- Error code 1: The parameter delivered by the controller was invalid.
- Error code 2: The switch failed to generate a file.
- Error code 3: The file generated by the switch exceeded 200 MB and cannot be uploaded.
- Error code 4: Failed to upload the file.
Procedure
- Failed to create the file.
- If the storage space on the switch was insufficient, delete redundant files.
- If there was a file with the same file name, and this file cannot be overwritten:
- Change the created file name.
- Delete the file with the same file name.
- Change the file operation permission so that the file with the same file name can be directly overwritten.
- When files failed to be uploaded, contact technical support personnel based on the error code.
CMAINT/4/RENAMEFILE
Message
CMAINT/4/RENAMEFILE: File operation record. (Operation="[STRING]", OldFileName="[STRING]", NewFileName="[STRING]", Result="[STRING]")
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| Operation | Indicates the file operation type. |
| OldFileName | Indicates the old file name. |
| NewFileName | Indicates the new file name. |
| Result | Indicates the file operation result:
|
Possible Causes
After OIDS is enabled, the switch periodically collects device running information and saves the information in database files. After running a certain period, the switch renames historical database files and records logs.
Procedure
- If the file renaming operation result displays success, the log is informational only, and no action is required.
- If the file renaming operation result displays fail, check the log information after 5 hours.
- If the file renaming operation result displays fail for twice or more times, contact technical support personnel.
- If the file renaming operation result displays fail only once, no action is required.
CMAINT/6/SWITCH_CHG
Message
CMAINT/6/SWITCH_CHG: Configure upload alarms switch. (Type="[STRING]", Value="[STRING]", Result="[STRING]")
