No relevant resource is found in the selected language.
Enterprise
Worldwide
Huawei Global - English
Support Documentation
S7700 V200R019C10 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RIP

RIP

RIP/3/ADD_RTE_F

Message

RIP/3/ADD_RTE_F: Because of unsuccessful validation, routes not added to database. Total [number] occurrences since [date] [time]. (Destination=[IPADDR]/[STRING], Interface=[STRING], ProcessId=[ULONG])

Description

Failed to add routes to the database due to unsuccessful validation.

Parameters

Parameter Name Parameter Meaning

[number]

Indicates the number of failed attempts to authenticate RIP routes and install RIP routes to the database.

[date]

Indicates the date when the last RIP classful node was added to the update list.

[time]

Indicates the time when the last RIP classful node was added to the update list.

Destination

Indicates the destination IP address.

Interface

Indicates the interface name.

ProcessId

Indicates the process ID.

Possible Causes

Failed to add routes to the database due to unsuccessful validation.

Procedure

  1. Run the display diagnostic-information command, save the command output.
  2. Collect log information and configuration information, and then contact technical support personnel.

RIP/3/DEL_SAMEADDR_PEER_F

Message

RIP/3/DEL_SAMEADDR_PEER_F:Deleted the peer [IPADDR] configuration with the same address as the local interface. (ProcessId=[ULONG], Interface=[STRING])

Description

The configuration of the neighboring interface with the same IP address as the local interface was deleted.

Parameters

Parameter Name Parameter Meaning
[IPADDR] Interface address
ProcessId Process ID
Interface Interface name

Possible Causes

The local interface and the neighboring interface had the same IP address.

Procedure

  1. Change the IP address of the neighboring interface or the local interface.

RIP/6/FREEZE_ENTER

Message

RIP/6/FREEZE_ENTER:The number of routes on RIP process [process-id] reached the upper threshold, and thus the RIP process was suspended.

Description

The number of routes on the RIP process reached the upper threshold, and the RIP process was suspended and did not process the received packets.

Parameters

Parameter Name Parameter Meaning
[process-id] Indicates the RIP process ID.

Possible Causes

The number of routes on the RIP process reached the upper threshold.

Procedure

  1. This log message is informational only, and no action is required.

RIP/6/FREEZE_RECOVER

Message

RIP/6/FREEZE_RECOVER:The number of routes reached the lower threshold, and thus RIP process [process-id] recovered from the suspension state and resumed processing packets.

Description

The number of routes reached the lower threshold, and thus the RIP process recovered from the suspension state and resumed processing packets.

Parameters

Parameter Name Parameter Meaning
[process-id] Indicates the RIP process ID.

Possible Causes

The number of routes reached the lower threshold.

Procedure

  1. This log message is informational only, and no action is required.

RIP/6/GR_ABORT

Message

RIP/6/GR_ABORT: Aborted Graceful Restart. (AbortReason=[STRING], ProcessId=[ULONG])

Description

The GR process was aborted exceptionally.

Parameters

Parameter Name Parameter Meaning

AbortReason

Indicates the cause of abort.

  • Virtual interface delete or Virtual interface went UP to Down event.
  • 1. An abort message was received from the Helper because of the topology changed.
  • 2. An interface was added to the Restarter.
  • 3. The Restarter deleted existing interface.
  • 4. The status was changed.
  • 5. An event of deleting an interface or an event that interface status changes from Up to Down occurred.

ProcessId

Indicates the process ID.

Possible Causes

The GR process was aborted exceptionally.

Procedure

  1. Services will be interrupted temporarily and then restored after the GR process is complete.

RIP/6/GR_ENTER

Message

RIP/6/GR_ENTER: Entering Graceful Restart mode. (Mode=[STRING], ProcessId=[ULONG])

Description

The GR process started on the switch.

Parameters

Parameter Name Parameter Meaning
Mode Indicates the GR mode.
  • 1: planned
  • 2: unplanned
ProcessId Indicates the process ID.

Possible Causes

The GR process started on the switch.

Procedure

  1. This log message is informational only, and no action is required.

RIP/6/GR_ENTER_HELPER

Message

RIP/6/GR_ENTER_HELPER: Entering helper mode for restarting neighbor [ip-address] for [timer-value] seconds. (ProcessId=[ULONG])

Description

The switch started to function as GR Helper for the neighbor functioning as GR Restarter.

Parameters

Parameter Name Parameter Meaning
[ip-address] Indicates the IP address of a switch functioning as GR Helper.
[timer-value] Indicates the value of a GR cut-off timer.
ProcessId Indicates the process ID.

Possible Causes

The switch started to function as GR Helper for the neighbor functioning as GR Restarter.

Procedure

  1. This log message is informational only, and no action is required.

RIP/6/GR_EXIT

Message

RIP/6/GR_EXIT: Exiting Graceful Restart mode. (Mode=[STRING], ProcessId=[ULONG])

Description

The switch functioning as GR Restarter exited from the GR process.

Parameters

Parameter Name Parameter Meaning
Mode Indicates the GR mode.
ProcessId Indicates the process ID.

Possible Causes

The GR process was complete on the switch functioning as GR Restarter.

Procedure

  1. This log message is informational only, and no action is required.

RIP/6/GR_EXIT_HELPER

Message

RIP/6/GR_EXIT_HELPER: Exiting helper mode for restarting neighbor [IPAddress]. (Reason=[STRING], ProcessId=[ULONG])

Description

After the GR process was complete, the switch functioning as GR Helper exited from the Helper mode.

Parameters

Parameter Name Parameter Meaning
IPAddress Indicates the IP address of the switch functioning as GR Helper.
Reason Indicates the cause of abort.
ProcessId Indicates the process ID.

Possible Causes

After the GR process was complete, the switch was no longer the GR Helper for the neighbor.

Procedure

  1. This log message is informational only, and no action is required.

RIP/6/GR_EXIT_RT_UPDT

Message

RIP/6/GR_EXIT_RT_UPDT: Exiting route update phase. (Reason=[STRING], ProcessId=[ULONG])

Description

The update of routes was complete.

Parameters

Parameter Name Parameter Meaning
Reason Indicates the cause of stopping updating routes.
ProcessId Indicates the process ID.

Possible Causes

After the Restarter received the UCN(Update Complete Notification) from the Helper, the Restarter updated routes and sent routes to the RM.

Procedure

  1. This log message is informational only, and no action is required.

RIP/3/GR_RCV_ABORT

Message

RIP/3/GR_RCV_ABORT: Received abort notification from helper [IPADDR] on interface [InterfaceName]. (ProcessId=[ULONG])

Description

The Restarter switch received an unexpected abort message from the Helper switch.

Parameters

Parameter Name Parameter Meaning
[IPADDR] Indicates the IP address of the switch functioning as GR Helper.
[InterfaceName] Indicates the interface name.
ProcessId Indicates the process ID.

Possible Causes

The topology or configuration was changed.

Procedure

  1. This log message indicates that the GR process is terminated, and no action is required.

RIP/6/GR_SND_ABORT

Message

RIP/6/GR_SND_ABORT: Sending abort notification to neighbor [IPADDR] on interface [InterfaceName]. (ProcessId=[ULONG])

Description

An unexpected abort notification was sent to the neighbor.

Parameters

Parameter Name Parameter Meaning
[IPADDR] Indicates the IP address of the switch functioning as GR Restarter.
[InterfaceName] Indicates the interface name.
ProcessId Indicates the process ID.

Possible Causes

An unexpected abort notification, indicating that the topology or configuration was changed, was sent to the neighbor.

Procedure

  1. This log message indicates that the GR process is terminated, and no action is required.

RIP/6/GR_TOPO_CHANGE

Message

RIP/6/GR_TOPO_CHANGE: Detected topology change on interface [interface-name]. (ProcessId=[ULONG])

Description

The Restarter switch sent a message indicating the topology change.

Parameters

Parameter Name Parameter Meaning

[interface-name]

Indicates the name of interface.

ProcessId

Indicates the process ID.

Possible Causes

The topology was changed after some routes were deleted.

Procedure

  1. This log message indicates that the GR process is terminated, and no action is required.

RIP/6/ISSU_COMP

Message

RIP/6/ISSU_COMP: RIP finished PAF comparison. The upgrade type is [STRING].

Description

RIP completed the operation of comparing the upgrade type in the PAF/License file with that on the local router and confirmed the upgrade type.

Parameters

Parameter Name Parameter Meaning
[STRING] Indicates the upgrade type.
  • 1: lossless
  • 2: lossy

Possible Causes

RIP completed the operation of comparing the upgrade type in the PAF/License file with that on the local router.

Procedure

  1. This log message is informational only, and no action is required.

RIP/3/MAX_LOGIF_REACH_F

Message

RIP/3/MAX_LOGIF_REACH_F: The number of supported logical interfaces reached the maximum value. Total [ULONG] occurrences since [STRING] [STRING]. (ProcessId=[ULONG]).

Description

The number of supported logical interfaces in the process reached the maximum. Total [ULONG] occurrences since [STRING] [STRING].

Parameters

Parameter Name Parameter Meaning
[ULONG] Maximum number of packets requested.
[STRING] Day of the last packet requested.
[STRING] Time of the last packet requested.
ProcessId Indicates the process ID.

Possible Causes

The number of supported logical interfaces in the process reached the maximum.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

RIP/6/MEMSHORT_ENTER

Message

RIP/6/MEMSHORT_ENTER:RIP received memory shortage notification.

Description

The memory was insufficient.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

The memory was insufficient.

Procedure

  1. Run the display diagnostic-information command to save the displayed result.
  2. Collect log information and configuration information, and then contact technical support personnel.

RIP/6/MEMSHORT_RECOVER

Message

RIP/6/MEMSHORT_RECOVER:RIP received memory shortage recovery notification.

Description

The system recovered from memory shortage.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

The system recovered from memory shortage.

Procedure

  1. This log message is informational only, and no action is required.

RIP/6/RIP_NBR_ADD

Message

RIP/6/RIP_NBR_ADD: RIP neighbor is added on the interface. (ProcessId=[ULONG], Interface=[STRING], Neighbor=[IPADDR])

Description

A RIP neighbor is added on the interface.

Parameters

Parameter Name Parameter Meaning

ProcessId

ID of a RIP process

Interface

Interface name

Neighbor

IP address of a neighbor

Possible Causes

The router receives information about the new neighbor.

Procedure

  1. This log message is informational only, and no action is required.

RIP/6/RIP_NBR_DEL

Message

RIP/6/RIP_NBR_DEL: RIP Neighbor is deleted from the interface. (ProcessId=[ULONG], Interface=[STRING], Neighbor=[IPADDR], Reason=[STRING])

Description

A RIP neighbor is deleted from the interface.

Parameters

Parameter Name Parameter Meaning

ProcessId

ID of a RIP process

Interface

Interface name

Neighbor

IP address of a neighbor

Reason

Reason for deleting a RIP neighbor

Possible Causes

The RIP neighbor may be deleted due to the following reasons:
  • The RIP neighbor interface went Down or was deleted.
  • Configurations of similar versions were changed.
  • Information about the BFD session in the Down state was received.
  • The timer expired.

Procedure

  1. This log message is informational only, and no action is required.

RIP/6/RCV_HA_SMOVER

Message

RIP/6/RCV_HA_SMOVER:Received the notification that HA Smooth is complete.

Description

The notification that GR is complete was received.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

The notification that GR is complete was received.

Procedure

  1. This log message is informational only, and no action is required.
Translation
简体中文
Download
Updated: 2021-11-11

Document ID: EDOC1100126883

Views: 34436

Downloads: 18

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Digital Signature File

Digital Signature Authentication Mode
Share
Previous Next
Huawei e+ App Huawei e+

Copyright © 2021 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :