APS
APS/7/DEFECT_NOTIFY_PFM
Message
APS/7/DEFECT_NOTIFY_PFM:Defect changed failed to notify plat. (EventType=[ULONG], MoudleID=[ULONG], GroupIndex=[ULONG], WorkingProtectionMiss=[ULONG], LocalSMissFarBFlag=[ULONG], ProtectionModeMiss=[ULONG], RevertiveModeMiss=[ULONG], ErrorCode=[ULONG])
Description
After detecting inconsistency, the APS state machine notified the service module of the devices to process the result. If the notification failed, the notified information was recorded for later analysis.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| EventType | Indicates the type of an event. |
| MoudleID | Indicates the index of a module. |
| GroupIndex | Indicates the index of a protection group. |
| WorkingProtectionMiss | Indicating the working link and the protection link are inconsistent. |
| LocalSMissFarBFlag | Indicates that the local receiving link and the remote sending link are inconsistent. |
| ProtectionModeMiss | Indicates that the protection mode is inconsistent. |
| RevertiveModeMiss | Indicates that the revertive mode is inconsistent. |
| ErrorCode | Indicates an error code. |
APS/7/PKT_PLAT_TO_PPI
Message
APS/7/PKT_PLAT_TO_PPI:Plat send packet template to adapter failed.(ModuleID=[ULONG], ProtectionID=[ULONG], APSFastSndInterval=[ULONG], WtrTime=[ULONG], HoldOffTimeInterval=[ULONG], ProtectionEnable=[ULONG], APSPktFlag=[ULONG], ProtectionMode=[ULONG], ProtectionDirection=[ULONG], RevertiveMode=[ULONG], LocalState=[ULONG], GlobalState=[ULONG], APSState=[ULONG], LocalSelector=[ULONG], LocalBridge=[ULONG], SwitchCommand=[ULONG], WorkingLinkState=[ULONG], ProtectionLinkState=[ULONG], ProtectionProtocol=[ULONG], StatusSlot=[STRING], WorkingLinkManageState=[ULONG], ProtectionLinkManageState=[ULONG], ErrorCode=[ULONG])
Description
After finishing status calculation, the APS state machine sent the packet template to the device. If the sending failed, the information about the packet template was recorded for later analysis.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| ModuleID | Indicates the index of a module. |
| ProtectionID | Indicates the index of a protection group. |
| APSFastSndInterval | Indicates the interval for fast sending packets. |
| WtrTime | Indicates the wait-to-restore time. |
| HoldOffTimeInterval | Indicates the hold-off time. |
| ProtectionEnable | Indicates the flag bit for enabling the protection. |
| APSPktFlag | Indicates the flag bit for enabling packets. |
| ProtectionMode | Indicates the protection mode. |
| ProtectionDirection | Indicates the protection direction. |
| RevertiveMode | Indicates the revertive mode. |
| LocalState | Indicates the local status. |
| GlobalState | Indicates the global status. |
| APSState | Indicates the status of APS packets. |
| LocalSelector | Indicates the local tunnel for selecting and receiving services. |
| LocalBridge | Indicates the local tunnel for sending services. |
| SwitchCommand | Indicates the local manual commands. |
| WorkingLinkState | Indicates the status of the local working link. |
| ProtectionLinkState | Indicates the status of the local protection link. |
| ProtectionProtocol | Indicates the protection protocol. |
| StatusSlot | Indicates the slot where the state machine is located. |
| WorkingLinkManageState | Indicates the management state of the local working link. |
| ProtectionLinkManageState | Indicates the management state of the local protection link. |
| ErrorCode | Indicates an error code. |
APS/7/STATE_NOTIFY_PFM
Message
APS/7/STATE_NOTIFY_PFM:State changed failed to notify plat. (EventType=[ULONG], MoudleID=[ULONG], GroupIndex=[ULONG], ProtectionType=[ULONG], LocalState=[ULONG], WorkingLinkState=[ULONG], ProtectionLinkState=[ULONG], LocalAPSRequest=[ULONG], LocalRequestedSignal=[ULONG], LocalBridgedSignal=[ULONG], FarEndRequest=[ULONG], FarABit=[ULONG], FarBBit=[ULONG], FarDBit=[ULONG], FarRBit=[ULONG], FarEndRequestedSignal=[ULONG], FarEndBridgedSignal=[ULONG], ErrorCode=[ULONG])
Description
After finishing status calculation, the APS state machine notified the service module of the devices to process the result. If the notification failed, the notified information was recorded for later analysis.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| EventType | Indicates the type of an event. |
| MoudleID | Indicates the index of a module. |
| GroupIndex | Indicates the index of a protection group. |
| ProtectionType | Indicates the protection type. |
| LocalState | Indicates the local status. |
| WorkingLinkState | Indicates the status of the working link. |
| ProtectionLinkState | Indicates the status of the protection link. |
| LocalAPSRequest | Indicates the local APS request. |
| LocalRequestedSignal | Indicates the flag of local receiving. |
| LocalBridgedSignal | Indicates the flag of local sending. |
| FarEndRequest | Indicates the request at the far end. |
| FarABit | Indicates whether the far end uses APS packets. |
| FarBBit | Indicates the protection mode at the far end. |
| FarDBit | Indicates the switching mode at the far end. |
| FarRBit | Indicates the revertive mode at the far end. |
| FarEndRequestedSignal | Indicates the flag of receiving at the far end. |
| FarEndBridgedSignal | Indicates the flag of sending at the far end. |
| ErrorCode | Indicates an error code. |
APS/7/STATE_NOTIFY_PPI
Message
APS/7/STATE_NOTIFY_PPI:State changed failed to notify ppi. (EventType=[ULONG], MoudleID=[ULONG], ProtectionID=[ULONG], WorkingLinkIndex=[ULONG], ProntectionLinkIndex=[ULONG], HoldoffTime=[ULONG], WTRTime=[ULONG], FastSndInterval=[ULONG], ProtectionMode=[ULONG], ProtectionDirection=[ULONG], RevertiveMode=[ULONG], SwitchState=[ULONG], OldGlobalState=[ULONG], SwitchResult=[ULONG], ProtectionEnableFlag=[ULONG], SwitchCommand=[ULONG], WorkingLinkState=[ULONG], ProtectionLinkState=[ULONG], ErrorCode=[ULONG])
Description
After finishing status calculation, the APS state machine notified the device to process the result. If the notification failed, the notified information was recorded for later analysis.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| EventType | Indicates the type of an event. |
| MoudleID | Indicates the index of a module. |
| GroupIndex | Indicates the index of a protection group. |
| ProtectionType | Indicates the index of the working link. |
| LocalState | Indicates the index of the protection link. |
| WorkingLinkState | Indicates the hold-off time. |
| ProtectionLinkState | Indicates the wait-to-restore time. |
| LocalAPSRequest | Indicates the interval for fast sending packets. |
| LocalRequestedSignal | Indicates the protection mode. |
| LocalBridgedSignal | Indicates the protection direction. |
| FarEndRequest | Indicates the revertive mode. |
| FarABit | Indicates the switching status. |
| FarBBit | Indicates the original priority status. |
| FarDBit | Indicates the switching result. |
| FarRBit | Indicates the flag for enabling the protection. |
| FarEndRequestedSignal | Indicates the command for switching. |
| FarEndBridgedSignal | Indicates the status of the working link. |
| ErrorCode | Indicates an error code. |
APS/7/SYN_MES_IO_TO_MAIN
Message
APS/7/SYN_MES_IO_TO_MAIN:IO board synchronization message to main board failed. (Mid=[ULONG], GroupIndex=[ULONG], SwitchRequest=[ULONG], DefectDirection=[ULONG], StatusSlot=[STRING], SourceSlot=[STRING], ErrorCode=[ULONG])
Description
The APS module on the interface board failed to send information to the main control board.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| Mid | Indicates the index of a module. |
| GroupIndex | Indicates the index of a protection group. |
| SwitchRequest | Indicates the request for switching. |
| DefectDirection | Indicates the switching direction. |
| StatusSlot | Indicates the slot where the state machine is located. |
| SourceSlot | Indicates the slot where the information comes from. |
| ErrorCode | Indicates an error code. |
APS/7/SYN_MES_MAIN_TO_IO
Message
APS/7/SYN_MES_MAIN_TO_IO:Main board synchronization message to IO board failed. (Mid=[ULONG], GroupIndex=[ULONG], SwitchRequest=[ULONG], DefectDirection=[ULONG], StatusSlot=[STRING], SourceSlot=[STRING], ErrorCode=[ULONG])
Description
The APS module on the main control board failed to send information to the interface board.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| Mid | Indicates the index of a module. |
| GroupIndex | Indicates the index of a protection group. |
| SwitchRequest | Indicates the request for switching. |
| DefectDirection | Indicates the switching direction. |
| StatusSlot | Indicates the slot where the state machine is located. |
| SourceSlot | Indicates the slot where the information comes from. |
| ErrorCode | Indicates an error code. |