No relevant resource is found in the selected language.
Enterprise
Worldwide
Huawei Global - English
Support Documentation
S7700 V200R019C10 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IGMP

IGMP

IGMP/6/GLB_ENTRY

Message

IGMP/6/GLB_ENTRY:In VPN instance "[vpn-instance-name]", IGMP discarded the received report ([source-address], [group-address]) because the number of IGMP group memberships in all VPN instances reached the limit. The current statistical number of IGMP group memberships is [statistical-number]. (FlCode=[STRING][ULONG])

Description

The received IGMP Report message was discarded because the number of IGMP entries in all instances reached the limit.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[source-address] Indicates the source address.
[group-address] Indicates the group address.
[statistical-number] Indicates the upper limit of the number of IGMP entries.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that IGMP limit for all instances was set, when the total number of IGMP entries in all instances reached the limit, the received IGMP Report message was discarded.

Procedure

  1. If services are not affected, no action is required.
  2. If services are affected, run the igmp global limit number command in the system view to increase the maximum number of IGMP entries that can be created on the device.
  3. If increasing the maximum number is not allowed due to the processing capability limit of the system, Collect log information and configuration information, and then contact technical support personnel.

IGMP/6/GLB_LIMIT

Message

IGMP/6/GLB_LIMIT:In all VPN instances, the number of existed IGMP group memberships exceeded the limit. (FlCode=[STRING][ULONG])

Description

The total number of IGMP entries in all current instances exceeded the configured limit.

Parameters

Parameter Name Parameter Meaning
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that all instances were configured with the IGMP limit, this log message was generated when the total number of IGMP entries in all instances exceeded the limit.

Procedure

  1. Run the igmp global limit command in the system view to adjust the maximum number of IGMP entries.

IGMP/6/IF_ENTRY

Message

IGMP/6/IF_ENTRY:In VPN instance "[vpn-instance-name]", IGMP discarded the received report ([source-address], [group-address]) because the number of IGMP group memberships reached the limit on the interface [interface-name]. The current statistical number of IGMP group memberships is [statistical-number]. (FlCode=[STRING][ULONG])

Description

The IGMP Report message received from the interface was discarded because the number of IGMP entries on the interface reached the upper limit.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[source-address] Indicates the source address.
[group-address] Indicates the group address.
[interface-name] Indicates the interface name.
[statistical-number] Indicates the upper limit of the number of IGMP entries.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the current interface was configured with the IGMP limit, when the number of IGMP entries on the interface reached the limit, the received IGMP Report message was discarded.

Procedure

  1. If services are not affected, no action is required.
  2. If services are affected, run the igmp limit number command in the interface view to increase the maximum number of IGMP group memberships that the current interface can maintain.
  3. If increasing the maximum number is not allowed due to the processing capability limit of the system, Collect log information and configuration information, and then contact technical support personnel.

IGMP/6/IF_LIMIT

Message

IGMP/6/IF_LIMIT:In VPN instance "[vpn-instance-name]", the number of existed IGMP group memberships exceeded the limit on this interface. (FlCode=[STRING][ULONG])

Description

The number of IGMP entries on the current interface exceeded the upper limit.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the current interface was configured with the IGMP limit, the number of IGMP entries on the interface exceeded the limit.

Procedure

  1. Run the igmp limit command in an interface view to adjust the maximum number of IGMP group memberships.

IGMP/6/INST_ENTRY

Message

IGMP/6/INST_ENTRY:In VPN instance "[vpn-instance-name]", IGMP discarded the received report ([source-address], [group-address]) because the number of IGMP group memberships in this VPN instance reached the limit. The current statistical number of IGMP group memberships is [statistical-number]. (FlCode=[STRING][ULONG])

Description

The received IGMP Report message was discarded because the number of IGMP entries in the instance reached the upper limit.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[source-address] Indicates the source address.
[group-address] Indicates the group address.
[statistical-number] Indicates the upper limit of the number of IGMP entries.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the current instance was configured with the IGMP limit, when the number of IGMP entries in the instance reached the limit, the received IGMP Report message was discarded.

Procedure

  1. If services are not affected, no action is required.
  2. If services are affected, run the limit number command in the VPN instance IGMP view to increase the maximum number of IGMP entries that can be created in the VPN instance.
  3. If increasing the maximum number is not allowed due to the processing capability limit of the system, Collect log information and configuration information, and then contact technical support personnel.

IGMP/6/INST_LIMIT

Message

IGMP/6/INST_LIMIT:In VPN instance "[vpn-instance-name]", the number of existed IGMP group memberships exceeded the limit. (FlCode=[STRING][ULONG])

Description

The number of IGMP entries in the current instance exceeded the configured limit.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the current instance was configured with the IGMP limit, the number of IGMP entries in the current instance exceeded the limit.

Procedure

  1. Run the limit command in the IGMP view to adjust the maximum number of IGMP entries that can be created.

IGMP/4/INT_INV

Message

IGMP/4/INT_INV:In VPN instance "[vpn-instance-name]", a Mtrace packet received on an unknown interface was discarded. (FlCode=[STRING][ULONG])

Description

A Mtrace packet was received on an unknown interface.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
FlCode Indicates information about an output log. The information contains the document ID and row number.

Possible Causes

The interface was not configured with the IP address.

Procedure

  1. Run the display this command in the interface view to check whether the IP address is configured.
  2. Run the ip address ip-address { mask | mask-length } command to assign an IP address for the interface.
  3. End.

IGMP/4/REG_ACL_F

Message

IGMP/4/REG_ACL_F:In VPN instance "[vpn-instance-name]", registering ACL update callback functions failed. (FlCode=[STRING][ULONG])

Description

IGMP failed to register the ACL update callback function with the MRM.

Parameters

Parameter Name Parameter Meaning

[vpn-instance-name]

Indicates the name of the VPN instance.

FlCode

indicates the name of the source code file and the line number of this log message.

Possible Causes

Failed to call the MRM interface to add the ACL name to the MRM.

Procedure

  1. Reconfigure the commands for Named ACLs.

IGMP/4/SET_IGMP_GLBPLC_FAIL

Message

IGMP/4/SET_IGMP_GLBPLC_FAIL:In VPN instance "[vpn-instance-name]", failed to set the IGMP global application policy. (FlCode=[STRING][ULONG])

Description

Failed to set the IGMP application policy on the interface.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

Failed to deliver the interface application policy when IGMP was configured on the interface.

Procedure

  1. Run the undo igmp enable command and reconfigure IGMP on the interface.
  2. If this log message is generated after each reconfiguration, contact technical support personnel.

IGMP/6/VER1_RECV_INV

Message

IGMP/6/VER1_RECV_INV:In VPN instance "[vpn-instance-name]", ignored the received IGMP query of version [version] on IGMPv1 interface [interface-name] ([ip-address]). (FlCode=[STRING][ULONG])

Description

The received IGMP Query message of higher version was ignored by the IGMPv1 interface.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[version] Indicates the version number.
[interface-name] Indicates the name of an interface.
[ip-address] Indicates the IP address of an interface.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

1. The IGMPv1 interface received the IGMP Query message of other versions.

2. The IGMPv1 interface received the IGMP Query message of higher version 60 seconds later again.

Procedure

  1. This log message is informational only, and no action is required.

IGMP/6/VER2_RECV_INV

Message

IGMP/6/VER2_RECV_INV:In VPN instance "[vpn-instance-name]", ignored the received IGMP query of version [version] on IGMPv2 interface [interface-name] ([ip-address]). (FlCode=[STRING][ULONG])

Description

The received IGMP Query message of higher version or invalid IGMP Query message was ignored by the IGMPv2 interface.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[version] Indicates the version number.
[interface-name] Indicates the name of an interface.
[ip-address] Indicates the IP address of an interface.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

1. The IGMPv2 interface received the IGMP Query message of other versions.

2. The IGMPv2 interface received the IGMP Query message of higher version 60 seconds later again.

Procedure

  1. This log message is informational only, and no action is required.

IGMP/6/VER3_RECV_INV

Message

IGMP/6/VER3_RECV_INV:In VPN instance "[vpn-instance-name]", ignored the received IGMP query of version [version] on IGMPv3 interface [interface-name] ([ip-address]). (FlCode=[STRING][ULONG])

Description

The received IGMP Query message of other versions was ignored by the IGMPv3 interface.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[version] Indicates the version number.
[interface-name] Indicates the name of an interface.
[ip-address] Indicates the IP address of an interface.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

1. The IGMPv3 interface received the IGMP Query message of other versions.

2. The IGMPv3 interface received the IGMP Query message of higher version 60 seconds later again.

Procedure

  1. This log message is informational only, and no action is required.
Translation
简体中文
Download
Updated: 2021-11-11

Document ID: EDOC1100126883

Views: 34420

Downloads: 18

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Digital Signature File

Digital Signature Authentication Mode
Share
Previous Next
Huawei e+ App Huawei e+

Copyright © 2021 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :