INFO
INFO/4/DBG_ALL
Message
INFO/4/DBG_ALL:When deciding whether to turning on all the debugging switches, the user chose [Y/N].
INFO/4/FILE_DELETE
Possible Causes
- Cause 1: Before creating a folder, the system has created a file with the same name. Then the file property was changed to the folder. A failure might occur during this change, which caused a file name to be the same as that of the folder.
- Cause 2: Users manually created a file with the same name as the folder.
INFO/4/FILE_RENAME
Message
INFO/4/FILE_RENAME:The file "[OldName]" conflicts with log file directory, it is renamed to "[NewName]".
Parameters
Parameter Name | Parameter Meaning |
---|---|
OldName | Old name of a log file |
NewName | New name of a log file |
Possible Causes
- Cause 1: Before creating a folder, the system has created a file with the same name as the folder. Then the file property was changed to the folder. A failure might occur during this change, which caused a file name to be the same as that of the folder.
- Cause 2: Users manually created a file with the same name as the folder.
INFO/5/FILTERINFOID_FAIL
Message
INFO/5/FILTERINFOID_FAIL:Failed to execute the info-center filter-id command. (Task=[STRING], Ip=[STRING], VpnName=[STRING], User=[STRING], Parameter="[STRING]")
Parameters
Parameter Name | Parameter Meaning |
---|---|
Task |
Task ID |
Ip | IP address |
VpnName | VPN instance name |
User | User name |
Parameter | IDs or mnemonics, separated by commas (,), which failed to be set |
Procedure
- Check whether the log ID or mnemonic to be configured has been registered.
- If the log ID or mnemonic has not been registered, register it.
- If the log ID or mnemonic has been registered, go to Step 2.
- Check whether the log ID or mnemonic has been repeatedly configured.
- If the log ID or mnemonic has been repeatedly configured, delete the repeated configuration.
- If the log ID or mnemonic has not been repeatedly configured, go to Step 3.
- Check whether the log filtering configuration has reached the upper limit.
- If the log filtering configuration has reached the upper limit, clear log filtering information.
- If the log filtering configuration has not reached the upper limit, go to Step 4.
- Collect log information and configuration information, and then contact technical support personnel.
INFO/4/IC_DISABLE_INFOCENTER
Message
INFO/4/IC_DISABLE_INFOCENTER:Recorded [Command] command information. (Task=[STRING], Ip=[STRING], VpnName=[STRING], User=[STRING], Command="[STRING]")
Parameters
Parameter Name | Parameter Meaning |
---|---|
Task | Task ID |
Ip | IP address |
VpnName | Name of a VPN instance |
User | User name |
Command | Command used to disable the information center |
INFO/6/LOGFILE_DELETED
INFO/6/LOGFILE_DELETED_REASON
INFO/4/RST_LOGB
INFO/4/SUPPRESS_LOG
Message
INFO/4/SUPPRESS_LOG:Last message repeated [ULONG] times.(InfoID=[ULONG], ModuleName=[STRING], InfoAlias=[STRING])
Parameters
Parameter Name | Parameter Meaning |
---|---|
[ULONG] | The count of repeat times. |
InfoID | The repeat log ID. |
ModuleName | The module name of the repeat log. |
InfoAlias | The alias name of the repeat log. |