No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Enterprise
Worldwide
Huawei Global - English
Search
Support Documentation
S7700 V200R019C10 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
TNLM

TNLM

TNLM/5/ADD_EXTNODE

Message

TNLM/5/ADD_EXTNODE:Failed to add the extnode to radix tree(IP address = [ULONG],Mask = [ULONG]).

Description

Failed to add the external node to the binary tree.

Parameters

Parameter Name Parameter Meaning
IP address Indicates the IP address.
Mask Indicates the mask.

Possible Causes

Failed to add the external node to the binary tree.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

TNLM/5/ADD_NODE

Message

TNLM/5/ADD_NODE:Failed to add RadixNode to tunnel binding tree(NextHopIpAddr = [ULONG],TunnelIfIndex = [ULONG]).

Description

Failed to add the node to the tunnel binding tree.

Parameters

Parameter Name Parameter Meaning
NextHopIpAddr Indicates the IP address of the next hop.
TunnelIfIndex Indicates the index of the tunnel interface.

Possible Causes

Failed to add the node to the tunnel binding tree.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

TNLM/5/BINDING

Message

TNLM/5/BINDING:Failed to set tunnel binding(Errcode = [ULONG]).

Description

Tunnel binding failed.

Parameters

Parameter Name Parameter Meaning
Errcode Indicates the error code.

Possible Causes

Tunnel binding failed.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

TNLM/5/DEL_BINDING

Message

TNLM/5/DEL_BINDING:Failed to delete tunnel binding(PolicyID = [ULONG],IP address = [ULONG]).

Description

Deleting tunnel binding failed.

Parameters

Parameter Name Parameter Meaning
PolicyID Indicates the ID of the policy.
IP address Indicates the IP address.

Possible Causes

Deleting tunnel binding failed.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

TNLM/4/DEL_NODE

Message

TNLM/4/DEL_NODE:It could not delete the all node from the Radix tree(Errcode = [ULONG]).

Description

Nodes on the binary tree cannot be deleted.

Parameters

Parameter Name Parameter Meaning
Errcode Indicates the error code.

Possible Causes

Failed to delete nodes on the binary tree.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

TNLM/6/FAIL_ALLOCTOKEN

Message

TNLM/6/FAIL_ALLOCTOKEN:The number of tunnel ID(s) exceeds the maximum value defined in the PAF file. (AllocationSpace=[STRING])

Description

The number of tunnel IDs exceeded the maximum value specified in the PAF file, and thus the specified token space failed to be allocated.

Parameters

Parameter Name Parameter Meaning
AllocationSpace Token space to be allocated

Possible Causes

The number of established tunnels exceeds the allowable maximum number.

Procedure

  1. If services are not affected, no action is required.
  2. If services are affected, Collect log information and configuration information, and then contact technical support personnel.

TNLM/5/FAIL_SETTNLPLY

Message

TNLM/5/FAIL_SETTNLPLY:Failed to set tnl-policy of type [type]. Policy name is [policy].

Description

Failed to add the tunneling policy.

Parameters

Parameter Name Parameter Meaning
[type] Indicates the type of the tunneling policy.
[policy] Indicates the name of the tunneling policy.

Possible Causes

Failed to add the tunneling policy.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

TNLM/5/Gen_PolicyID

Message

TNLM/5/Gen_PolicyID: The tunnel policy ID is invalid.

Description

The tunnel policy ID is invalid.

Parameters

Parameter Name Parameter Meaning

None

None

Possible Causes

Failed to obtain the valid policy ID when the tunnel policy was configured.

Procedure

  1. Run the display diagnostic-information command, save the command output.
  2. Collect log information and configuration information, and then contact technical support personnel.

TNLM/5/INVALID_POLICY

Message

TNLM/5/INVALID_POLICY:The policy node is null according to policy ID [policy-id].

Description

The tunnel policy node corresponding to the policy ID is null.

Parameters

Parameter Name Parameter Meaning
[policy-id] Indicates the tunnel policy ID.

Possible Causes

The tunnel policy node corresponding to the policy ID is null.

Procedure

  1. Use the display tunnel-policy [ tunnel-policy-name ] command to view and save the configuration information of tunnel policies.
  2. Collect log information and configuration information, and then contact technical support personnel.
  3. End.

TNLM/5/MEM_SHORTAGE

Message

TNLM/5/MEM_SHORTAGE:Memory shortage in [vpn-instance].

Description

Memory was insufficient.

Parameters

Parameter Name Parameter Meaning
[vpn-instance] Indicates the name of a VPN instance.

Possible Causes

Memory was insufficient.

Procedure

  1. Increase the memory.

TNLM/5/NTY_VPN_APPPLCY

Message

TNLM/5/NTY_VPN_APPPLCY:Tnlm notify the application module the event of vpn instance [vpn-instance] using tnl-policy.

Description

The tunnel management module notified the application module of the event that the VPN instance adopted the tunnel policy.

Parameters

Parameter Name Parameter Meaning
[vpn-instance] Indicates the name of a VPN instance.

Possible Causes

The tunnel management module notified the application module of the event that the VPN instance adopted the tunnel policy.

Procedure

  1. This log message is informational only, and no action is required.

TNLM/5/OLD_LOG

Message

TNLM/5/OLD_LOG:Reserved for old log.

Description

Reserve the log for the old log.

Parameters

Parameter Name Parameter Meaning

None

None

Possible Causes

None.

Procedure

  1. This log message is informational only, and no action is required.

TNLM/5/REC_L3V_APPPLCY

Message

TNLM/5/REC_L3V_APPPLCY:Vpn instance [vpn-instance] uses tnl-policy [policy], event type is [event].

Description

This log message recorded the information about the tunnel policy adopted by the VPN instance.

Parameters

Parameter Name Parameter Meaning
[vpn-instance] Indicates the name of a VPN instance.
[policy] Indicates the name of the tunneling policy.
[event] Indicates the type of an event.

Possible Causes

This log message recorded the information about the tunnel policy adopted by the VPN instance.

Procedure

  1. This log message is informational only, and no action is required.

TNLM/5/SEARCH_NODE

Message

TNLM/5/SEARCH_NODE:Failed to search RadixNode from tunnel binding tree(NextHopIpAddr = [ULONG])

Description

Failed to search the tunnel binding tree for the node.

Parameters

Parameter Name Parameter Meaning
NextHopIpAddr Indicates the IP address of the next hop.

Possible Causes

Failed to search the tunnel binding tree for the node.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

TNLM/5/SET_POLICY_NAME

Message

TNLM/5/SET_POLICY_NAME:Failed to set the tunnel policy name.(ReturnValue=[ULONG])

Description

The value returned by the function includes VOS_ERR, TNLM_INFO_PolicyNotAvail, TNLM_INFO_LowMemory, and TNLM_MEMORY_FAILURE.

Parameters

Parameter Name Parameter Meaning
ReturnValue Indicates the value returned by the function.

Possible Causes

Failed to add the tunnel policy.

Procedure

  1. Run the tunnel-policy tunnel-policy-name command in the system view to save the log information.
  2. Collect log information and configuration information, and then contact technical support personnel.
  3. End.

TNLM/5/TNL_IF_DEL

Message

TNLM/5/TNL_IF_DEL:The event that the tunnel interface was deleted was processed. (IfnetIndex=[STRING])

Description

The event that the tunnel interface was deleted was processed.

Parameters

Parameter Name Parameter Meaning

IfnetIndex

Indicates the index of an interface.

Possible Causes

The event that the tunnel interface was deleted was processed.

Procedure

  1. This log message is informational only, and no action is required.
Translation
简体中文
Download
Updated: 2022-05-25

Document ID: EDOC1100126883

Views: 65932

Downloads: 31

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Digital Signature File

Digital Signature Authentication Mode
Share
Previous Next

Copyright © 2023 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :