No relevant resource is found in the selected language.
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OMNG/4/LOST_OVER30S: The process [STRING] has lost the heartbeat for more than 30s.(Slot=[OCTET], Vcpu=[INTEGER])
Description
The device does not receive any heartbeat packets of the specified NETCONF process within 30s.
Parameters
Parameter Name
Parameter Meaning
[STRING]
Indicates a process name.
[OCTET]
Indicates Slot ID.
[INTEGER]
Indicates vcpu ID.
Possible Causes
The device does not receive any heartbeat packets of the specified NETCONF process within 30s.
Procedure
Run the display process callstackprocess-id command to check call stack information of the specified NETCONF process and find the process abnormality reason.
OMNG/3/LOST_OVER60S
Message
OMNG/3/LOST_OVER60S: The process [STRING] is killed because it has lost the heartbeat for more than 60s.(Slot=[OCTET], Vcpu=[INTEGER])
Description
The specified NETCONF process is terminated because the device does not receive any heartbeat packets of this process within 60s.
Parameters
Parameter Name
Parameter Meaning
[STRING]
Indicates a process name.
[OCTET]
Indicates Slot ID.
[INTEGER]
Indicates vcpu ID.
Possible Causes
The specified NETCONF process is terminated because the device does not receive any heartbeat packets of this process within 60s.
Procedure
Run the display process callstackprocess-id command to check call stack information of the specified NETCONF process and find the process abnormality reason.
OMNG/6/OPENMNG_USER_SYSLOG
Message
OMNG/6/OPENMNG_USER_SYSLOG: Syslog with facility [STRING] level [STRING]: [STRING]
Description
The iMaster NCE-Campus delivers configurations to the device.
Parameters
Parameter Name
Parameter Meaning
facility [STRING]
Indicates the tool used by the log host to record information. The value is local7.
level [STRING]
Indicates the log level. The value is information.
[STRING]
Indicates the operation content.
Possible Causes
The event that the iMaster NCE-Campus delivers service configurations is logged.
Procedure
This log is informational only, and no action is required.