No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Enterprise
Worldwide
Huawei Global - English
Search
Support Documentation
S7700 V200R019C10 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MRM

MRM

MRM/3/BACKUPSOCKET_E

Message

MRM/3/BACKUPSOCKET_E:In VPN instance "[vpn-instance-name]", MRM failed to backup [protocol-name] socket ID [socket-id]. The error code was [error-code].(FlCode=[STRING][ULONG])

Description

The MRM module on the main control board failed to back up the socket ID.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[protocol-name] Indicates the name of the protocol. The value can be:
  • GMP
  • PIM
  • MRM PUBLIC
[socket-id] Indicates the socket ID.
[error-code] Indicates the error code. The value can be:

  • 0: The value is successfully returned.

  • 1: The main control board in use is not the master one.

  • 2: The slave main control board does not exist.

  • 3: Fail to allocate memory.

  • 4: Fail to write data to the buffer.

  • 5: Fail to access data from the buffer.

  • 6: Fail to send messages.

  • 7: The backup is canceled
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

1:

Communication fails, and the socket ID cannot be backed up normally.

2:

Programs or cooperative programs are processed abnormally.

Procedure

  1. Restart the slave board.
  2. Run the undo multicast routing-enable command or the undo multicast ipv6 routing-enable command to delete multicast configurations, and then reconfigure related multicast commands.

MRM/3/BATCHSOCKET_E

Message

MRM/3/BATCHSOCKET_E:MRM failed to backup socket ID in batches. The error code was [error-code]. (FlCode=[STRING][ULONG])

Description

The MRM module on the main control board failed to back up the socket ID in batches.

Parameters

Parameter Name Parameter Meaning
[error-code] Indicates the error code. The value can be:

  • 0: The value is successfully returned.

  • 1: The main control board in use is not the master one.

  • 2: The slave main control board does not exist.

  • 3: Fail to allocate memory.

  • 4: Fail to write data to the buffer.

  • 5: Fail to access data from the buffer.

  • 6: Fail to send messages.

  • 7: The backup is canceled
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

1:

Communication fails, and the socket ID cannot be backed up normally.

2:

Programs or cooperative programs are processed abnormally.

Procedure

  1. Restart the slave board.
  2. Run the undo multicast routing-enable command or the undo multicast ipv6 routing-enable command to delete multicast configurations, and then reconfigure related multicast commands.

MRM/6/CAC_GLB_CHN

Message

MRM/6/CAC_GLB_CHN:In VPN instance "[vpn-instance-name]", because the number of PIM route entries which belong to the channel [channel-name] reached the global limit of this channel, PIM discarded the received Join message ([source-address], [group-address]). The current statistical number of PIM routing entries of this channel is [statistical-number]. (FlCode=[STRING][ULONG])

Description

The total number of PIM entries, existing and newly added, exceeded the channel-based global entry limit, and thus the received Join message that recorded the newly added PIM entry was discarded.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[channel-name] Indicates the channel name.
[source-address] Indicates the source address.
[group-address] Indicates the group address.
[statistical-number] Indicates the statistics of multicast routing entries.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

When the channel-based global entry limit was set, the number of PIM entries reached the limit.

Procedure

  • If services are not affected, no action is required.
  • If services are affected, run the igmp global limit command in the channel view of the corresponding instance to increase the maximum number of PIM entries that can be created globally for the channel.
  • If increasing the maximum number is not allowed due to the processing capability limit of the system, Collect log information and configuration information, and then contact technical support personnel.

MRM/6/CAC_GLB_CHN_LIMIT

Message

MRM/6/CAC_GLB_CHN_LIMIT:In VPN instance "[vpn-instance-name]", the number of existed PIM routing entries which belong to the channel [channel-name] exceeded this channel's limit. The current statistical number of these PIM routing entries is [statistical-number]. The limit of this channel is [limit-number]. (FlCode=[STRING][ULONG])

Description

The counting of existing entries exceeded the channel-based global entry limit.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[channel-name] Indicates the channel name.
[statistical-number] Indicates the statistics of PIM entries.
[limit-number] Indicates the channel-based global entry limit.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the channel-based global entry limit was set, the number of existing PIM entries exceeded the limit.

Procedure

  • This log message is informational only, and no action is required.

MRM/6/CAC_GLB_TOT_THRSHLD

Message

MRM/6/CAC_GLB_TOT_THRSHLD:In VPN instance "[vpn-instance-name]", the number of existed PIM routing entries exceeded the global threshold. The current statistical number of PIM routing entries is [statistical-number]. The global threshold is [threshold]. (FlCode=[STRING][ULONG])

Description

The number of existing entries exceeded the threshold of the global entry limit.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[statistical-number] Indicates the statistics of PIM entries.
[threshold] Indicates the threshold for the global entry limit.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the channel-based global entry limit was set, the number of PIM entries exceeded the threshold.

Procedure

  • This log message is informational only, and no action is required.

MRM/6/CAC_GLB_TOTAL

Message

MRM/6/CAC_GLB_TOTAL:In VPN instance "[vpn-instance-name]", PIM discarded the received Join message ([source-address], [group-address]) because the number of PIM route entries reached the global limit. The current statistical number of PIM route entries of this instance is [statistical-number]. (FlCode=[STRING][ULONG])

Description

The total number of PIM entries, existing and newly added, exceeded the global entry limit, and thus the received Join message that recorded the newly added PIM entry was discarded.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[source-address] Indicates the source address.
[group-address] Indicates the group address.
[statistical-number] Indicates the statistics of PIM entries.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the global entry limit was set, the number of PIM entries reached the limit.

Procedure

  • If services are not affected, no action is required.
  • If services are affected, run the igmp global limit command in the multicast channel view of the corresponding instance to increase the maximum number of PIM entries that can be created for the channel.
  • If increasing the maximum number is not allowed due to the processing capability limit of the system, Collect log information and configuration information, and then contact technical support personnel.

MRM/6/CAC_GLB_TOTAL_LIMIT

Message

MRM/6/CAC_GLB_TOTAL_LIMIT:In VPN instance "[vpn-instance-name]", the number of existed PIM routing entries exceeded the global limit. The current statistical number of global PIM routing entries is [statistical-number]. The global limit is [limit-number]. (FlCode=[STRING][ULONG])

Description

The number of existing entries exceeded the global entry limit.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[statistical-number] Indicates the statistics of PIM entries.
[limit-number] Indicates the channel-based global entry limit.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the global entry limit was set, the number of existing PIM entries exceeded the limit.

Procedure

  • This log message is informational only, and no action is required.

MRM/6/CAC_GLBCHN_THRSHLD

Message

MRM/6/CAC_GLBCHN_THRSHLD:In VPN instance "[vpn-instance-name]", the number of existed PIM routing entries which belong to the channel [channel-name] exceeded this channel's threshold. The current statistical number of these PIM routing entries is [statistical-number]. The threshold of this channel is [threshold]. (FlCode=[STRING][ULONG])

Description

The counting of existing entries belonging to the channel exceeded the threshold for the channel-based global entry limit.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[channel-name] Indicates the channel name.
[statistical-number] Indicates the statistics of PIM entries.
[threshold] Indicates the threshold for the channel-based global entry limit.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the channel-based global entry limit was set, the number of PIM entries exceeded the threshold.

Procedure

  • This log message is informational only, and no action is required.

MRM/6/CAC_OIF_CHN

Message

MRM/6/CAC_OIF_CHN:In VPN instance "[vpn-instance-name]", because the number or bandwidth of PIM route entries which use the interface [interface-name] as OIF and belong to the channel [channel-name] reached this channel's limit on this interface, PIM discarded the received Join message ([source-address], [group-address]). The current statistical number of these PIM routing entries is [statistical-number], the statistical bandwidth is [statistical-bandwidth]. (FlCode=[STRING][ULONG])

Description

The received PIM Join message was discarded on the outgoing interface because the channel, to which the PIM entry was added, was configured with the CAC limit and the number of PIM entries on the channel exceeded the limit on the interface.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[interface-name] Indicates the interface name.
[channel-name] Indicates the channel name.
[source-address] Indicates the source address.
[group-address] Indicates the group address.
[statistical-number] Indicates the statistics of PIM entries.
[statistical-bandwidth] Indicates the statistics of bandwidth.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the channel-based limit was set on the outgoing interface, the number of PIM entries or the statistics of bandwidth reached the limit.

Procedure

  • If services are not affected, no action is required.
  • If services are affected, run the multicast limit channel channel-name out max-entry limit command in the interface view to increase the maximum number of PIM entries with the current interface as the outbound interface.
  • If increasing the maximum number is not allowed due to the processing capability limit of the system, Collect log information and configuration information, and then contact technical support personnel.

MRM/6/CAC_OIF_CHN_LIMIT

Message

MRM/6/CAC_OIF_CHN_LIMIT:In VPN instance "[vpn-instance-name]", the number or bandwidth of existed PIM routing entries which use the interface [interface-name] as OIF and belong to the channel [channel-name] exceeded this channel's limit on this interface. The current statistical number of these PIM routing entries is [statistical-number], the statistical bandwidth is [statistical-bandwidth]. On this interface, of this channel, the count limit is [limit-number] and the bandwidth limit is [limit-bandwidth]. (FlCode=[STRING][ULONG])

Description

The number of existing entries or the statistics of bandwidth exceeded the channel-based entry limit on the outgoing interface.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[interface-name] Indicates the interface name.
[channel-name] Indicates the channel name.
[statistical-number] Indicates the statistics of PIM entries.
[statistical-bandwidth] Indicates the statistics of bandwidth.
[limit-number] Indicates the limit of PIM entries.
[limit-bandwidth] Indicates the limit of bandwidth.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the channel-based limit was set on the outgoing interface, the number of existing entries or the statistics of bandwidth exceeded the limit.

Procedure

  • This log message is informational only, and no action is required.

MRM/6/CAC_OIF_TOT_LIMIT

Message

MRM/6/CAC_OIF_TOT_LIMIT:In VPN instance "[vpn-instance-name]", the number or bandwidth of existed PIM routing entries which use the interface [interface-name] as OIF exceeded the total limit on this interface. The current statistical number of these PIM routing entries is [statistical-number], the statistical bandwidth is [statistical-bandwidth]. On this interface, the total count limit is [limit-number] and the total bandwidth limit is [limit-bandwidth]. (FlCode=[STRING][ULONG])

Description

The number of existing entries or the statistics of bandwidth exceeded the total limit configured on the interface.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[interface-name] Indicates the interface name.
[statistical-number] Indicates the statistics of PIM entries.
[statistical-bandwidth] Indicates the statistics of bandwidth.
[limit-number] Indicates the limit of PIM entries.
[limit-bandwidth] Indicates the limit of bandwidth.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the total limit was set on the interface, the number of existing PIM entries exceeded the limit.

Procedure

  • This log message is informational only, and no action is required.

MRM/6/CAC_OIF_TOTAL

Message

MRM/6/CAC_OIF_TOTAL:In VPN instance "[vpn-instance-name]", because the number or bandwidth of PIM route entries which use the interface [interface-name] as OIF reached the total limit on this interface, PIM discarded the received Join message ([source-address], [group-address]). The current statistical number of these PIM routing entries is [statistical-number], the statistical bandwidth is [statistical-bandwidth]. (FlCode=[STRING][ULONG])

Description

The total of PIM entries, existing and newly added, exceeded the total limit configured on the outgoing interface, and thus the received Join message that recorded the newly added PIM entry was discarded.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[interface-name] Indicates the interface name.
[source-address] Indicates the source address.
[group-address] Indicates the group address.
[statistical-number] Indicates the statistics of PIM entries.
[statistical-bandwidth] Indicates the statistics of bandwidth.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the total limit was set on the outgoing interface, the number of PIM entries or the statistics of bandwidth reached the limit.

Procedure

  • If services are not affected, no action is required.
  • If services are affected, run the multicast limit out max-entry limit command in the interface view to increase the maximum number of PIM entries with the current interface as the outbound interface.
  • If increasing the maximum number is not allowed due to the system processing capability limit, Collect log information and configuration information, and then contact technical support personnel.

MRM/6/CAC_UNSPEC_DENY

Message

MRM/6/CAC_UNSPEC_DENY:In VPN instance "[vpn-instance-name]", PIM discarded the received Join message ([source-address], [group-address]) because the "unspecified-channel deny" function has been configured. (FlCode=[STRING][ULONG])

Description

The received Join message was for an unknown channel and thus was discarded because the function of the CAC policy unspecified-channel deny was configured.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[source-address] Indicates the source address.
[group-address] Indicates the group address.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the function of the CAC policy unspecified-channel deny was configured, the received PIM entry did not join any channels.

Procedure

  • If services are not affected, no action is required.
  • If services are affected, run the group group-address mask { group-mask-length | group-mask } [ source source-address mask { source-mask-length | source-mask } ] [ per-bandwidth traffic-rate ] command in the channel view to add the group to the channel. If adding the group to the channel affects overall channel allocation, you are advertised to contact technical support personnel

MRM/3/CHECKSOCKET_E

Message

MRM/3/CHECKSOCKET_E:In VPN instance "[vpn-instance-name]", MRM failed to check socket ID [protocol-name]. The error code was [error-code]. (FlCode=[STRING][ULONG])

Description

The MRM module on the slave board failed to check the socket ID.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[protocol-name] Indicates the name of the protocol. The value can be:
  • GMP
  • PIM
  • MRM PUBLIC
[error-code] Indicates the error code. The value can be:

  • 1040657: Fail to allocate memory.

  • 1048660: Fail to allocate sockets.

  • 1048662: The task ID is invalid.

  • 1048663: The instance number is invalid.

  • -22: The parameter is invalid.

  • -107: There is no TCB structure.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

1:

Programs on the slave board or cooperative programs on the master or slave board are processed abnormally, causing the socket ID to be incorrect.

2:

The socket does not support the checking operation.

Procedure

  1. Restart the slave board.
  2. Run the undo multicast routing-enable command or the undo multicast ipv6 routing-enable command to delete multicast configurations, and then reconfigure related multicast commands.

MRM/6/DOWNNUM_EXCEED_LIMIT

Message

MRM/6/DOWNNUM_EXCEED_LIMIT:In VPN instance "[vpn-instance-name]", the number of the interfaces that deliver to MFIB exceeded the upper limit. The current number of downstream interfaces that deliver to MFIB is [downstream-interface-number] and the upper limit is [downstream-interface-limit]. [ignored-log-number]logs have been ignored.(FlCode=[STRING][ULONG])

Description

The number of the outbound interfaces that are delivered to the MFIB exceeded the upper limit, and the extra outbound interfaces were no longer delivered.

Parameters

Parameter Name Parameter Meaning

[vpn-instance-name]

Indicates the name of a VPN instance.

[downstream-interface-number]

Indicates the number of the outbound interfaces that have already been delivered to the MFIB.

[downstream-interface-limit]

Indicates the number of the outbound interfaces that can be delivered to the MFIB.

[ignored-log-number]

Indicates the number of logs that are ignored.

FlCode

Indicates the name of the source code file and the line number of this log message.

Possible Causes

1: When an entry is being created, the number of the outbound interfaces in this entry exceeds the upper limit.

2: Outbound interfaces are continuously added to a certain entry, causing the number of the outbound interfaces in this entry exceeds the upper limit.

Procedure

  1. When creating an entry, note that the number of the outbound interfaces in this entry does not exceed the upper limit.
  2. Do not add more outbound interfaces to the same entry.
  3. Delete some outbound interfaces from the entry before adding new outbound interfaces.

MRM/3/GETSOCKET_E

Message

MRM/3/GETSOCKET_E:In VPN instance "[vpn-instance-name]", MRM failed to get backup socket ID of [protocol-name]. The error code was [error-code]. (FlCode=[STRING][ULONG])

Description

When creating a socket, the slave board failed to obtain the backup socket ID from the master board.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[protocol-name] Indicates the name of the protocol. The value can be:
  • GMP
  • PIM
  • MRM PUBLIC
[error-code] Indicates the error code. The value can be:

  • -1: The socket is invalid.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

1:

Communication fails, causing the backup failure of the socket ID.

2:

Programs on the slave board or cooperative programs on the master or slave board are processed abnormally.

Procedure

  1. Restart the slave board.
  2. Run the undo multicast routing-enable command or the undo multicast ipv6 routing-enable command to delete multicast configurations, and then reconfigure related multicast commands.

MRM/3/MIGP_NOTEXIST_FAIL

Message

MRM/3/MIGP_NOTEXIST_FAIL:In VPN instance "[vpn-instance-name]", the MIGP table did not exist. (FlCode=[STRING][ULONG])

Description

The MIGP table does not exist.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

An error occurred when the system is initialized.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

MRM/3/SEARCH_MIGP_FAIL

Message

MRM/3/SEARCH_MIGP_FAIL:In VPN instance "[vpn-instance-name]", finding the specified route [source-address] in the MIGP table failed. (FlCode=[STRING][ULONG])

Description

Failed to find the specified route in the MIGP table.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[source-address] Indicates the source address.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

The MIGP table does not contain related entries or RM failed to search the MIGP table.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

MRM/2/VLINKID_CHG

Message

MRM/2/VLINKID_CHG:In VPN instance "[vpn-instance-name]", virtual link index changed. (Interface=[STRING], OldPeer=[STRING], NewPeer=[STRING], OldVlinkindex=[ULONG], NewVlinkindex=[ULONG], Event=0x[STRING], FlCode=[STRING][ULONG])

Description

The index of the virtual link changed after the active/standby switchover.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
Interface Indicates the interface name.
OldPeer Indicates the IP address of the original peer.
NewPeer Indicates the IP address of the new peer.
OldVlinkindex Indicates the index of the virtual link before the active/standby switchover.
NewVlinkindex Indicates the index of the virtual link after the active/standby switchover.
Event Indicates the event.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

The index of the virtual link changed.

Procedure

  • Collect log information and configuration information, and then contact technical support personnel.

MRM/6/VRFLIST_LIMIT

Message

MRM/6/VRFLIST_LIMIT:In VPN instance [vpn-instance-name], the number of VRFs delivered to the MFIB exceeded the upper limit. The current number of VRFs that are delivered to MFIB is [CurrentNumber] and the upper limit is [UpperLimit]. [IgnoreNumber] logs have been ignored.(FlCode=[STRING][ULONG])

Description

The number of VPNs delivered by MRM to the MFIB exceeded the upper limit.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[CurrentNumber] Indicates the number of VPNs that has been delivered by MRM to the MFIB.
[UpperLimit] Indicates the upper limit on the number of VPNs that can be delivered by MRM to the MFIB.
[IgnoreNumber] Indicates the number of ignored logs.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

When the number of VPNs delivered by MRM to the MFIB exceeded the upper limit, MRM did not deliver any VPN to the MFIB.

Procedure

  1. Check whether the total number of VPNs that can be delivered to the MFIB can be controlled by purchasing license files. If so, increase the total number of VPNs that can be delivered to the MFIB.
  2. Collect log information and configuration information, and then contact technical support personnel.
Translation
简体中文
Download
Updated: 2022-05-25

Document ID: EDOC1100126883

Views: 65927

Downloads: 31

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Digital Signature File

Digital Signature Authentication Mode
Share
Previous Next

Copyright © 2023 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :