Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring RMON
Pre-configuration Tasks
Before configuring RMON, complete the following tasks:
- Configure Ethernet interface parameters.
- Configure basic SNMP functions.
Configuration Procedure
The RMON statistics collection and alarm can be configured in any sequence. However, if the alarm variables configured in the RMON alarm are MIB variables defined in the statistics or history group, the Ethernet or history statistics collection must be configured on the monitored Ethernet interface first. Otherwise, alarm entries cannot be created.