Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Parameters for Connecting to an FTP Server
Context
Before connecting to an FTP server, specify the FTP server address used to receive NQA test results, configure a user name and password used for logging in to the FTP server, and the name of file used to save NQA test results.
Procedure
- Run system-view
The system view is displayed.
- Use either of the following methods to configure the IP
address of the FTP server:
- On an IP network, run the nqa-ftp-record ip-address ip-address command to configure the IP address of the FTP server.
- On a VPN network, run the nqa-ftp-record vpn-instance vpn-instance command to configure the VPN instance name of the FTP server.
- (Optional) Run nqa-ftp-record source-address ip-address
The FTP client address is configured.
- Run nqa-ftp-record username username
The user name used for logging in to the FTP server is configured. The user name is used when test results are saved on the FTP server.
- Run nqa-ftp-record password { password | cipher cipher-password }
The password used for logging in to the FTP server is configured. The password is used when test results are saved on the FTP server.
- Run nqa-ftp-record filename filename
The name of the file used to save NQA test results is configured.