Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Configuring a Path Jitter Test
Networking Requirements
As shown in Figure 6-38, SwitchA functions as an NQA client to test the jitter on the network between SwitchA and SwitchC.
Configuration Roadmap
The configuration roadmap is as follows:
Configure SwitchA as an NQA client and configure a path jitter test instance on SwitchA.
Configure SwitchC as an NQA server.
Procedure
- Configure an IP address for each interface
and ensure reachable routes between switches.
# Configure SwitchA.
<HUAWEI> system-view [HUAWEI] sysname SwitchA [SwitchA] vlan 100 [SwitchA-vlan100] quit [SwitchA] interface gigabitethernet 1/0/1 [SwitchA-GigabitEthernet1/0/1] port link-type hybrid [SwitchA-GigabitEthernet1/0/1] port hybrid pvid vlan 100 [SwitchA-GigabitEthernet1/0/1] port hybrid untagged vlan 100 [SwitchA-GigabitEthernet1/0/1] quit [SwitchA] interface vlanif 100 [SwitchA-Vlanif100] ip address 10.1.1.1 24 [SwitchA-Vlanif100] quit [SwitchA] ip route-static 10.2.1.0 255.255.255.0 10.1.1.2
# Configure SwitchB.
<HUAWEI> system-view [HUAWEI] sysname SwitchB [SwitchB] vlan 100 [SwitchB-vlan100] quit [SwitchB] vlan 110 [SwitchB-vlan110] quit [SwitchB] interface gigabitethernet 1/0/1 [SwitchB-GigabitEthernet1/0/1] port link-type hybrid [SwitchB-GigabitEthernet1/0/1] port hybrid pvid vlan 100 [SwitchB-GigabitEthernet1/0/1] port hybrid untagged vlan 100 [SwitchB-GigabitEthernet1/0/1] quit [SwitchB] interface vlanif 100 [SwitchB-Vlanif100] ip address 10.1.1.2 24 [SwitchB-Vlanif100] quit [SwitchB] interface gigabitethernet 1/0/2 [SwitchB-GigabitEthernet1/0/2] port link-type hybrid [SwitchB-GigabitEthernet1/0/2] port hybrid pvid vlan 110 [SwitchB-GigabitEthernet1/0/2] port hybrid untagged vlan 110 [SwitchB-GigabitEthernet1/0/2] quit [SwitchB] interface vlanif 110 [SwitchB-Vlanif110] ip address 10.2.1.1 24 [SwitchB-Vlanif110] quit
# Configure SwitchC.
<HUAWEI> system-view [HUAWEI] sysname SwitchC [SwitchC] vlan 110 [SwitchC-vlan110] quit [SwitchC] interface gigabitethernet 1/0/1 [SwitchC-GigabitEthernet1/0/1] port link-type hybrid [SwitchC-GigabitEthernet1/0/1] port hybrid pvid vlan 110 [SwitchC-GigabitEthernet1/0/1] port hybrid untagged vlan 110 [SwitchC-GigabitEthernet1/0/1] quit [SwitchC] interface vlanif 110 [SwitchC-Vlanif110] ip address 10.2.1.2 24 [SwitchC-Vlanif110] quit [SwitchC] ip route-static 10.1.1.0 255.255.255.0 10.2.1.1
- Configure SwitchA.
# Enable the NQA client and create a path jitter test instance.
[SwitchA] nqa test-instance admin pathjitter [SwitchA-nqa-admin-pathjitter] test-type pathjitter [SwitchA-nqa-admin-pathjitter] destination-address ipv4 10.2.1.2
- Start the test instance.
[SwitchA-nqa-admin-pathjitter] start now - Verify the test result.
# View the test result.
[SwitchA-nqa-admin-pathjitter] display nqa results test-instance admin pathjitter NQA entry(admin, pathjitter) :testflag is inactive ,testtype is pathjitter Current Status:CLOSE 1 . Test 1 result The test is finished Trace Completion Status:success 1 . Hop 1 Destination ip address:10.1.1.2 Jitter Completion Status:success Jitter Finish Status:finished SendProbe:60 ResponseProbe:60 Min/Max/Avg/Sum RTT:1/4/2/128 RTT Square Sum:286 NumOfRTT:60 Drop operation number:0 Operation sequence errors number:0 RTT Stats errors number:0 System busy operation number:0 Operation timeout number:0 Min Positive SD:1 Min Positive DS:1 Max Positive SD:2 Max Positive DS:2 Positive SD Number:17 Positive DS Number:15 Positive SD Sum:18 Positive DS Sum:16 Positive SD Square Sum:20 Positive DS Square Sum:18 Min Negative SD:1 Min Negative DS:1 Max Negative SD:1 Max Negative DS:1 Negative SD Number:17 Negative DS Number:17 Negative SD Sum:17 Negative DS Sum:17 Negative SD Square Sum:17 Negative DS Square Sum:17 Max Delay SD:2 Max Delay DS:1 Average of Jitter:1 NumberOfOWD:60 Average of Jitter SD:1 Average of Jitter DS:1 Jitter out value:0.4592443 Jitter in value:0.4454907 OWD SD Sum:61 OWD DS Sum:7 Packet Loss Ratio:0% Packet Loss Count:0 2 . Hop 2 Destination ip address:10.2.1.2 Jitter Completion Status:success Jitter Finish Status:finished SendProbe:60 ResponseProbe:60 Min/Max/Avg/Sum RTT:2/89/9/518 RTT Square Sum:19734 NumOfRTT:60 Drop operation number:0 Operation sequence errors number:0 RTT Stats errors number:0 System busy operation number:0 Operation timeout number:0 Min Positive SD:1 Min Positive DS:1 Max Positive SD:84 Max Positive DS:2 Positive SD Number:11 Positive DS Number:3 Positive SD Sum:161 Positive DS Sum:5 Positive SD Square Sum:8821 Positive DS Square Sum:9 Min Negative SD:1 Min Negative DS:1 Max Negative SD:22 Max Negative DS:1 Negative SD Number:13 Negative DS Number:3 Negative SD Sum:137 Negative DS Sum:3 Negative SD Square Sum:2347 Negative DS Square Sum:3 Max Delay SD:44 Max Delay DS:44 Average of Jitter:10 NumberOfOWD:60 Average of Jitter SD:12 Average of Jitter DS:1 Jitter out value:2.8217764 Jitter in value:0.0976862 OWD SD Sum:234 OWD DS Sum:224 Packet Loss Ratio:0% Packet Loss Count:0
Configuration Files
SwitchA configuration file
# sysname SwitchA # vlan batch 100 # interface Vlanif100 ip address 10.1.1.1 255.255.255.0 # interface GigabitEthernet1/0/1 port link-type hybrid port hybrid pvid vlan 100 port hybrid untagged vlan 100 # ip route-static 10.2.1.0 255.255.255.0 10.1.1.2 # nqa test-instance admin pathjitter test-type pathjitter destination-address ipv4 10.2.1.2 # return
SwitchB configuration file
# sysname SwitchB # vlan batch 100 110 # interface Vlanif100 ip address 10.1.1.2 255.255.255.0 # interface Vlanif110 ip address 10.2.1.1 255.255.255.0 # interface GigabitEthernet1/0/1 port link-type hybrid port hybrid pvid vlan 100 port hybrid untagged vlan 100 # interface GigabitEthernet1/0/2 port link-type hybrid port hybrid pvid vlan 110 port hybrid untagged vlan 110 # return
SwitchC configuration file
# sysname SwitchC # vlan batch 110 # interface Vlanif110 ip address 10.2.1.2 255.255.255.0 # interface GigabitEthernet1/0/1 port link-type hybrid port hybrid pvid vlan 110 port hybrid untagged vlan 110 # ip route-static 10.1.1.0 255.255.255.0 10.2.1.1 # return