Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Trap Function for Bulk Statistics Collection
Context
To monitor the use of the bulk statistics collection function, enable all traps of the bulk statistics collection module or enable the trap of a specified event by specifying the trap-name parameter according to your own needs.
Procedure
- Run system-view
The system view is displayed.
- Run snmp-agent trap enable feature-name bulkstat [ trap-name { hwbulkstatcollectincomplete | hwbulkstatcollectresume | hwbulkstattransferfilediscard | hwbulkstaturlconnectionfail | hwbulkstaturlconnectionresume } ]
Traps are enabled for the bulk statistics collection module.
By default, all traps of the bulk statistics collection module are disabled.
If the trap-name parameter is not specified in the command, all traps of the batch statistics module are enabled.