Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of Network-Level Hop-by-Hop Packet Loss Measurement
Prerequisites
After configuring iPCA to implement network-level hop-by-hop packet loss measurement, run the following commands in any view to check measurement results and configurations on MCP and DCPs.
Procedure
- Run the display ipfpm statistic-type loss instance instance-id [ ach ach-id ] command on the MCP to view packet loss statistics of the specified measurement instance.
- Run the display ipfpm mcp command on the MCP to display the MCP configuration and status.
- Run the display pm measure-info [ instance-type instance-type ] command on the MCP to display information about performance statistics counters.
- Run the display ipfpm dcp command on the DCP to check the DCP configurations and specifications such as the number of measurement instances.