Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring NetStream Original Flow Statistics Exporting
Context
Original flow statistics can be exported only after you have specified the source IP address, destination IP address and destination UDP port number for the exported packets.
Procedure
- Run the system-view command to enter the system view.
- Run the ip netstream export source ip-address command to configure the source address of the exported packets carrying original flow statistics.
- Run the ip netstream export host ip-address port-number [ vpn-instance vpn-instance-name ] command to configure the destination
NSC for exporting packets carrying IPv4 original flow
statistics.
You can configure two destination IP addresses to implement NSC backup. To configure a third destination IP address, run the undo ip netstream export host command to delete an existing one first; otherwise, the system displays a message indicating that the maximum number of IP addresses is exceeded and the configuration fails.