Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the NQA Alarm Function
Procedure
- Run system-view
The system view is displayed.
- Run snmp-agent trap enable feature-name nqa [ trap-name { nqafaillingalarmnotification | nqaftpsaverecordnotification | nqaftpstatsprobefailed | nqaftpstatstestcompleted | nqaftpstatstestfailed | nqaftpstatsthresholdnotification | nqahttpstatsprobefailed | nqahttpstatstestcompleted | nqahttpstatstestfailed | nqahttpstatsthresholdnotification | nqajitterstatsowdthresholdnotificationds | nqajitterstatsowdthresholdnotificationsd | nqajitterstatsrtdthresholdnotification | nqajitterstatstestcompleted | nqajitterstatstestfailed | nqaresultsprobefailed | nqaresultstestcompleted | nqaresultstestfailed | nqaresultstestresultchange | nqaresultsthresholdnotification | nqarisingalarmnotification | pingprobefailed | pingtestcompleted | pingtestfailed | traceroutetestcompleted | traceroutetestfailed | nqareflectorstatechangenotification } ]
The alarm function is enabled for the NQA module.
By default, the alarm function is enabled for the NQA module.