Logs and Alarms

Enterprise

Worldwide

- Türkçe

History
Popular search
Switches Routers Servers Storage Data Center Energy Cloud Computing
Quick access
Recommended

Logs and Alarms

When a log or an alarm is generated on a switch, the switch reports the log or alarm to the analyzer through syslog or SNMP. As shown in Figure 15-5, iMaster NCE-CampusInsight displays the severity, name, and occurrence time of the log or alarm, helping network administrators locate and rectify faults. For the log and alarm information that can be reported by switches to the analyzer, see the following table lists.

Figure 15-5 Alarm list on iMaster NCE-CampusInsight

Logs and Alarms that Can Be Reported by Switches to an Analyzer

Table 15-7 Logs

Module	Log
AAA	AAA/6/USER_EVENT_RADIUS_PROC
DOT1X	DOT1X/6/USER_EVENT_DOT1X_PROC
Portal	Portal/6/USER_EVENT_PORTAL_PROC
WEB	WEB/6/USER_EVENT_WEB_PROC
DHCP	DHCP/6/SNP_RCV_MSG NOTE: By default, the switch does not print the log. If you want to print the log, run the dhcp snooping packet-flow log enable command to enable the function of generating logs when DHCP packets are exchanged.
DEFD	All logs of the module. For details, see DEFD.
CM	CM/5/USER_ACCESSRESULT
CM	CM/5/USER_OFFLINERESULT
MSTP	All logs of the module. For details, see MSTP.
SEA	SEA/4/SIP_ABNORMAL_OFFLINE
	SEA/3/SIP_ACL_FAIL
	SEA/3/SIP_ACL_FAIL
	SEA/6/SIP_CREATE
	SEA/6/SIP_END
	SEA/4/SIP_INVITE_FAIL
	SEA/4/SIP_RES_FULL
	SEA/4/SIP_RES_FULL
SECE	All logs of the module. For details, see SECE.
SHELL	All logs of the module. For details, see SHELL.
ALML	All logs of the module. For details, see ALML.
CSSM	All logs of the module. For details, see CSSM.
MAD	All logs of the module. For details, see MAD.

Table 15-8 Alarms

Module	Alarm
ACLE	ACLE_1.3.6.1.4.1.2011.5.1.2.2.1.1.4.2 hwAclResThresholdExceedTrap
ACLE	ACLE_1.3.6.1.4.1.2011.5.1.2.2.1.1.4.4 hwAclResTotalCountExceedTrap
L3MB	L3MB_1.3.6.1.4.1.2011.5.25.227.2.1.55 hwBoardL3ResFull
L2IFPPI	L2IFPPI_1.3.6.1.4.1.2011.5.25.315.3.3 hwSlotMacUsageRaisingThreshold
L2IFPPI	L2IFPPI_1.3.6.1.4.1.2011.5.25.315.3.4 hwSlotMacUsageFallingThreshold
IFNET	IFNET_1.3.6.1.6.3.1.1.5.3 linkDown
IFNET	IFNET_1.3.6.1.6.3.1.1.5.4 linkUp
IFPDT	IFPDT_1.3.6.1.4.1.2011.5.25.157.2.219 hwInputRateChangeOverThresholdNotice
IFPDT	IFPDT_1.3.6.1.4.1.2011.5.25.157.2.220 hwOutputRateChangeOverThresholdNotice
LBDT	LBDT_1.3.6.1.4.1.2011.5.25.174.3.3 hwLdtPortLoopDetect
LBDT	LBDT_1.3.6.1.4.1.2011.5.25.174.3.4 hwLdtPortLoopDetectRecovery
MCAST	MCAST_1.3.6.1.4.1.2011.5.25.227.2.1.53 hwBoardMcResFull
MPLS	MPLS_1.3.6.1.4.1.2011.5.25.227.2.1.54 hwBoardMplsFwdResFull
BASETRAP	BASETRAP_1.3.6.1.4.1.2011.5.25.129.2.17.1 hwOpticalPowerAbnormal
BASETRAP	BASETRAP_1.3.6.1.4.1.2011.5.25.129.2.17.2 hwOpticalPowerResume
ENTITYTRAP	ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.2.3 hwBoardFail
ENTITYTRAP	ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.2.4 hwBoardFailResume

Enterprise

Huawei Cloud

Carrier

Consumer

Corporate

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, Traffic Distribution, NetStream, sFlow, TWAMP Light, NETCONF, eMDI, and Intelligent Video O&M.

Logs and Alarms that Can Be Reported by Switches to an Analyzer

Related Version

Related Documents

Digital Signature File