Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the NQA Test Instance Configuration
Prerequisites
After completing NQA configuration, run the following commands to check the NQA configuration.
Procedure
- Run the display nqa application command on the NQA client to check the type of the NQA test instance for a service.
- Run the display nqa-parameter command in the NQA view on the NQA client to check parameters configured for the current NQA test instance.
- Run the display nqa support-server-type command on the NQA client to check the server types supported by NQA.
- Run the display nqa support-test-type command on the NQA client to check the test instance types supported by NQA.
- Run the display nqa-agent command on the NQA client to check the status and configuration of the NQA client.
- Run the display nqa-server command on the NQA server to check information about the server.