Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of NQA Configuration Tasks
Configuring Basic NQA Test Functions
You can perform an NQA test by Configuring an NQA Test Instance and Scheduling an NQA Test Instance.
Configuring Extended NQA Test Functions
The following extended NQA functions are optional in NQA configuration:
Configuring RTP Test and RTP Snoop Test to Measure Quality of the Telepresence Conferences Network
By Configuring RTP Test and RTP Snoop Test Instances to Detect Network Quality of a Telepresence Video Conference, you can measure the delay, jitter, and packet loss ratio on a Telepresence network before deploying a Telepresence system, before a Telepresence conference, or during a Telepresence conference. Data collected in the RTP test and RTP snoop test helps to identify network segments of low quality so that you can take measures to optimize these network segments.