Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying the Outbound Interface of Specified Packets
Context
By checking the outbound interface of the packets that contain the specified attributes, you can find out the packet analysis server to which the packets are distributed, and then view the detailed analysis results on the corresponding server.
Procedure
- Run the display out-interface sip source-ip-address dip destination-ip-address [ sport source-port dport destination-port [ protocol { protocol-number | gre | icmp | igmp | ip | ipinip | ospf | tcp | udp } ] ] command to check the outbound interface of the packets that contain the specified attributes.