Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Traffic Policy
Context
With a traffic policy configured, the switches classify packets based on the Differentiated Services Code Point (DSCP) value, protocol type, IP address, port number, fragmented packet type, and time segment, and redirects the packets which have been selected for analysis to an Eth-Trunk.
Configure a traffic policy on a switch and apply the traffic policy to the interface connected to an optical splitter.
Procedure
- Configure a traffic classifier. For details, see Configuring a Traffic Classifier in "MQC Configuration" in the S12700 and S12700E V200R019C10 Configuration Guide - QoS.
- Configure redirection.
- Configure a traffic policy. For details, see Configuring a Traffic Policy in "MQC Configuration" in the S12700 and S12700E V200R019C10 Configuration Guide - QoS.
- Apply the traffic policy to the inbound interface where
traffic distribution is configured.