Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling NetStream Aggregation Flow Statistics Collection on an Interface
Context
Aggregation flow statistics can be exported only when you have enabled flow statistics collection on an interface.
Procedure
- Run the system-view command to enter the system view.
- Run the interface interface-type interface-number command to enter the interface view.
- Run the ip netstream { inbound | outbound } command to enable the NetStream function on
the interface to collect statistics about aggregation flows.
By default, NetStream is disabled for aggregation flows.