Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring iPCA to Implement Device-Level Packet Loss Measurement
Pre-configuration Tasks
Before configuring
iPCA to implement device-level packet loss measurement, complete the
following tasks:
- Configure static routes or routing protocols to ensure network connectivity between devices. For details, see S12700 and S12700E V200R019C10 Configuration Guide - IP Unicast Routing.
- Configure NTP to implement time synchronization between the devices. For details, see NTP Configuration in the S12700 and S12700E V200R019C10 Configuration Guide - Device Management.
Configuration Procedure
Configuring iPCA to Implement Packet Loss Measurement on a Device and Configuring iPCA to Implement Packet Loss Measurement on a Direct Link can be performed in any sequence. You can select one of them or both of them according to your needs.