Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Unidirectional Single-Fiber Communication
Procedure
- Run system-view
The system view is displayed.
- Run interface interface-type interface-number
The interface view is displayed.
- Run undo negotiation auto
The interface is configured to work in forcible mode.
By default, an Ethernet interface works in auto-negotiation mode.
- Run single-fiber enable
Unidirectional single-fiber communication is configured.
By default, unidirectional single-fiber communication is disabled.