Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling NetStream Original Flow Statistics Collection on an Interface
Context
IPv6 original flow statistics can be exported only when you have enabled flow statistics collection on an interface.
Procedure
- Run the system-view command to enter the system view.
- Run the interface interface-type interface-number command to enter the interface view.
- Run the ipv6 netstream { inbound | outbound } command to enable the NetStream
function on the interface to collect statistics about IPv6 flows.
By default, the NetStream function for IPv6 flows is disabled on the interface.