Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Stopping an NQA Test Instance
Context
A running NQA test instance can stop in the following
modes:
- The test stops automatically after all test packets are sent.
- Stop the NQA test instance at a specified time.
- Stop the NQA test instance after a delay.
Stop a running NQA test
instance using either of the following commands:
- Run the undo start command to stop the running NQA test instance.
- Run the stop command to stop the running NQA test instance.