Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Examples for NQA
- Example for Configuring a DNS Test Instance
- Example for Configuring an FTP Download Test Instance
- Example for Configuring an FTP Upload Test Instance
- Example for Configuring an HTTP Test Instance
- Example for Configuring an ICMP Test Instance
- Example for Configuring an ICMP Jitter Test Instance
- Example for Configuring an SNMP Test Instance
- Example for Configuring a TCP Test Instance
- Example for Configuring a Trace Test Instance
- Example for Configuring a UDP Test Instance
- Example for Configuring a UDP Jitter Test Instance
- Example for Configuring a Path Jitter Test
- Example for Configuring NQA to Check VoIP Service Jitter
- Example for Configuring the MAC Ping Test
- Example for Configuring MAC Ping to Detect the Connectivity of a VLAN network
- Example for Configuring LSP Ping Test for a Common Tunnel
- Example for Configuring LSP Jitter Test for a Common Tunnel
- Example for Configuring LSP Jitter Test for a TE Tunnel
- Example for Configuring LSP Trace Test for a TE Tunnel
- Example for Configuring the LSP Trace Test for Checking the CR-LSP Hot Standby Tunnel
- Example for Configuring MTrace Test for the RPF Path from the Multicast Source to the Querier
- Example for Configuring MTrace Test for the Path from the Multicast Source to the Querier
- Example for Configuring MTrace Test for the RPF Path from the Multicast Source to a Destination Host
- Example for Configuring MTrace Test for the Multicast Path from the Multicast Source to a Destination Host
- Example for Configuring the PWE3 Ping Test on a Single-Hop PW
- Example for Configuring the PWE3 Ping Test on a Multi-Hop PW
- Example for Configuring the PWE3 Trace Test on a Single-Hop PW
- Example for Configuring the PWE3 Trace Test on a Multi-Hop PW
- Example for Configuring a Threshold for the NQA Alarm
- Example for Sending Trap Massages to the NMS When the Transmission Delay Threshold Is Exceeded
- Example for Configuring Test Results to Be Sent to the FTP Server
- Example for Testing the Jitter and Packet Loss Ratio of a Telepresence Network