Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for RMON and RMON2
Involved Network Elements
The switch needs to work with a network management system.
Licensing Requirements
RMON and RMON2 are basic features of a switch and are not under License control.
Feature Support in V200R019C10
All models of S12700 and S12700E series switches support RMON and RMON2. Pay attention to the following:
XGE interfaces connected to the ET1D2IPS0S00, ET1D2FW00S00, ET1D2FW00S01, ET1D2FW00S02, or ACU2 cards do not support RMON and RMON2.
Feature Limitations
If the alarm variables configured in RMON alarm function are MIB variables defined in the statistics group or history group, the Ethernet or history statistics collection must be configured on the monitored Ethernet interface first.