Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring File Parameters for Saving Test Results Through FTP
Context
NQA test results can be sent to the specified FTP server and saved in text files. The system will generate a new text file with a continuous sequence number to save the subsequent test results: when either of the following parameters exceeds
the specified value:
- Number of test results saved in the file on the FTP server
- Time period for saving test results to the file on the FTP server
Procedure
- Run system-view
The system view is displayed.
- Run nqa-ftp-record item-num item-number
The number of test results saved to the file on the FTP server is configured.
By default, up to 100000 NQA test results can be stored in a file.
- Run nqa-ftp-record time time
The time period for saving test results to the file on the FTP server is configured.
By default, the time period is 60 minutes.
- (Optional) Run nqa upload statistics datetime-type { utc | local }
The type of the time based on which FTP test results are saved to a file through FTP is configured.
UTC is the default time type based on which NQA test results are uploaded to the server. This time type causes difficulties in time understanding. Therefore, changing the time type to local is recommended.