Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring RMON Alarm
Context
The RMON alarm involves event definition and alarm threshold setting.
Set the alarm threshold to monitor key indexes during system running. When an error occurs in the system, the related event is triggered. The event definition function determines whether to log the event or send a trap to the NMS.
If the variables configured in the RMON alarm are MIB variables defined in the statistics or history group, the Ethernet or history statistics collection must be configured on the monitored Ethernet interface first.
Procedure
- Run system-view
The system view is displayed.
- Run rmon event entry-number [ description string ] { log | trap object | log-trap object | none } [ owner owner-name ]
The event definition function is configured and an entry is added to an event table.
- Configure the alarm threshold function.
- (Optional) Run snmp-agent trap enable feature-name rmon [ trap-name { fallingalarm | risingalarm | rmon_pri_fallingalarm | rmon_pri_risingalarm } ]
The alarm is enabled for the RMON module.
By default, all alarms for the RMON module are enabled.