Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configure DLDP Functions
Pre-configuration Tasks
Before configuring DLDP, ensure that the interfaces on both ends work in non-auto-negotiation mode. When directly connected interfaces at both ends are configured with auto-negotiation and DLDP, if one unidirectional link fails, the two interfaces go Down due to auto-negotiation configuration.
- Enabling DLDP
- (Optional) Configuring the Working Mode of DLDP
- (Optional) Configuring the DLDP-Compatible Mode
- (Optional) Setting the Interval for Sending Advertisement Packets
- (Optional) Setting the Timeout Period of the DelayDown Timer
- (Optional) Setting the Mode of Shutting Down an Interface When a Unidirectional Link Is Detected
- (Optional) Configuring the Authentication Mode for DLDP Packets
- Verifying the DLDP Configuration