OSPF-MIB

1.3.6.1.2.1.14.1.1

ospfRouterId

IpAddress

Read-write

A 32-bit integer uniquely identifying the device in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the device's IP interface addresses.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.1.2

ospfAdminStat

INTEGER { enabled (1), disabled (2) }

Read-write

The administrative status of OSPF in the device. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it on all interfaces.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.1.3

ospfVersionNumber

INTEGER {version2 (2)}

Read-only

The current version number of the OSPF protocol is 2.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.1.4

ospfAreaBdrRtrStatus

INTEGER{true(1),false(2)}

Read-only

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.1.5

ospfASBdrRtrStatus

INTEGER{true(1),false(2)}

Read-write

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.1.6

ospfExternLsaCount

INTEGER (0..4294967295)

Read-only

The number of external link state advertisements (Type-5 LSA) in the link state database.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.1.7

ospfExternLsaCksumSum

Integer32

Read-only

The 32-bit sum of the LS checksums of the external link state advertisements contained in the link state database. This sum can be used to determine if there has been a change in a device's link state database and to compare the link state database of two devices. The value should be treated as unsigned when comparing two sums of checksums.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.1.8

ospfTOSSupport

INTEGER{true(1),false(2)}

Read-write

Currently, the maximum access is read-only. The return value 2 is supported only.

1.3.6.1.2.1.14.1.9

ospfOriginateNewLsas

INTEGER (0..4294967295)

Read-only

The number of new link-state advertisements that have been originated. This number is incremented each time the device originates a new LSA.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.1.10

ospfRxNewLsas

INTEGER (0..4294967295)

Read-only

The number of link state advertisements received that are determined to be new instantiations. This number does not include newer instantiations of self-originated link state advertisements. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.1.11

ospfExtLsdbLimit

Integer32 min: -1 max: 2147483647

Read-write

The value of this object specifies the maximum number of non-default AS-external LSAs entries that can be stored in the link state database. If the value is -1, then there is no limit. When the number of non-default AS-external LSAs in a device's link state database reaches ospfExtLsdbLimit, the device enters overflow state. The device never holds more than ospfExtLsdbLimit non-default AS-external LSAs in its database. ospfExtLsdbLimit MUST be set identically in all devices attached to the OSPF backbone or any regular OSPF area (for example, OSPF stub areas and NSSAs are excluded). The value of ospfExtLsdbLimit must be the same on all devices. The value ranges from 1 to 2147483647. By default, the value is -1.

Currently, the maximum access is read-only; the value ranges from 1 to 1000000.

1.3.6.1.2.1.14.1.12

ospfMulticastExtensions

Integer32

Read-write

A bit mask indicating whether the device is forwarding IP multicast (Class D) datagrams based on the algorithms defined in the multicast extensions to OSPF.

Bit 0, if set, indicates that the device can forward IP multicast datagrams in the device's directly attached areas (called intra-area multicast routing).

Bit 1, if set, indicates that the device can forward IP multicast datagrams between OSPF areas (called inter-area multicast routing).

Currently, the maximum access is read-only; the return value 0 is supported only.

1.3.6.1.2.1.14.1.13

ospfExitOverflowInterval

Integer32 (0..'7FFFFFFF'h)

Read-write

The number of seconds that, after entering OverflowState, a device will attempt to leave OverflowState. This allows the device to again originate non-default AS-external LSAs. When set to 0, the device will not leave overflow state until restarted. The value ranges from 0 to 2147483647. The default value is 0.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.1.14

ospfDemandExtensions

INTEGER{true(1),false(2)}

Read-write

Currently, the maximum access is read-only; the return value 2 is supported only.

1.3.6.1.2.1.14.1.15

ospfRFC1583Compatibility

INTEGER{true(1),false(2)}

Read-write

Indicates metrics used to choose among multiple AS-external LSAs. When RFC1583Compatibility is set to enabled, only cost will be used when choosing among multiple AS-external LSAs advertising the same destination. When RFC1583Compatibility is set to disabled, preference will be driven first by type of path using cost only to break ties.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.1.16

ospfOpaqueLsaSupport

INTEGER{true(1),false(2)}

Read-only

the device's support for Opaque LSA types.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.1.17

ospfReferenceBandwidth

INTEGER (0..4294967295)

Read-write

This object indicates the reference bandwidth in Kbit/s for calculating default interface metric. The default value is 100,000 Kbit/s (100 Mbit/s). That is, the cost is equal to 100000000 divided by bandwidth.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.1.18

ospfRestartSupport

INTEGER {none (1),plannedOnly (2),plannedAndUnplanned (3)}

Read-write

the device's support for OSPF graceful restart. Options include: no restart support, only planned restarts, or both planned and unplanned restarts.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.1.19

ospfRestartInterval

Integer32 (1..1800)

Read-write

The value of this object specifies the OSPF graceful restart timeout interval. When the timeout interval expires, the process leaves GR.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.1.20

ospfRestartStrictLsaChecking

INTEGER{true(1),false(2)}

Read-write

Indicates if strict LSA checking is enabled for graceful restart.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.1.21

ospfRestartStatus

INTEGER {notRestarting (1),plannedRestart (2),unplannedRestart (3)}

Read-only

Current status of OSPF graceful restart.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.1.22

ospfRestartAge

INTEGER (0..4294967295)

Read-only

Indicates the remaining time before GR times out, in seconds.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.1.23

ospfRestartExitReason

INTEGER {none (1),inProgress (2),completed (3),timedOut (4),topologyChanged (5)}

Read-only

Describes the outcome of the last attempt at a graceful restart.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.1.24

ospfAsLsaCount

INTEGER (0..4294967295)

Read-only

The number of AS-scope link state advertisements in the AS-scope link state database.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.1.25

ospfAsLsaCksumSum

INTEGER (0..4294967295)

Read-only

The 32-bit unsigned sum of the LS checksums of the AS link state advertisements contained in the AS-scope link state database. This sum can be used to determine if there has been a change in a device's AS-scope link state database, and to compare the AS-scope link state database of two devices.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.1.26

ospfStubRouterSupport

INTEGER{true(1),false(2)}

Read-only

the device's support for stub router functionality.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.1.27

ospfStubRouterAdvertisement

INTEGER {doNotAdvertise (1),advertise(2)}

Read-write

This object controls the advertisement of stub router LSAs by the device.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.1.28

ospfDiscontinuityTime

TimeTicks

Read-only

The value of sysUpTime on the most recent occasion at which any one of this MIB's counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.2.1.1

ospfAreaId

IpAddress

Read-only

A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.2.1.2

ospfAuthType

INTEGER {none (0),simplePassword (1),md5 (2)}

Read-create

The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis. Value range: {none (0), simplePassword (1), md5 (2), reserved for specification by IANA (>2)}The default value is 0.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.2.1.3

ospfImportAsExtern

INTEGER{importExternal (1),importNoExternal (2), importNssa (3)}

Read-create

Indicates if an area is a stub area, NSSA, or standard area. Type-5 AS-external LSAs and type-11 Opaque LSAs are not imported into stub areas or NSSAs. NSSAs import AS-external data as type-7 LSAs.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.2.1.4

ospfSpfRuns

INTEGER (0..4294967295)

Read-only

The number of times that the intra-area route table has been calculated using this area's link state database. This is typically done using Dijkstra's algorithm.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.2.1.5

ospfAreaBdrRtrCount

INTEGER (0..4294967295)

Read-only

The total number of Area Border Routers reachable within this area. This is initially zero and is calculated in each Shortest Path First (SPF) pass.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.2.1.6

ospfAsBdrRtrCount

INTEGER (0..4294967295)

Read-only

The total number of Autonomous System Border Routers reachable within this area. This is initially zero and is calculated in each SPF pass.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.2.1.7

ospfAreaLsaCount

INTEGER (0..4294967295)

Read-only

The total number of link state advertisements in this area's link state database, excluding AS-external LSAs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.2.1.8

ospfAreaLsaCksumSum

Integer32

Read-only

The 32-bit sum of the link state advertisements' LS checksums contained in this area's link state database. This sum excludes external (LS type-5) link state advertisements. The sum can be used to determine if there has been a change in a device's link state database, and to compare the link state database of two devices.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.2.1.9

ospfAreaSummary

INTEGER{noAreaSummary (1),sendAreaSummary (2)}

Read-create

The variable ospfAreaSummary controls the import of summary LSAs into stub and NSSA areas. It has no effect on other areas. If it is noAreaSummary, the device will not originate summary LSAs into the stub or NSSA area. It will rely entirely on its default route. If it is sendAreaSummary, the device will both summarize and propagate summary LSAs. The default value is noAreaSummary.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.2.1.10

ospfAreaStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.2.1.11

ospfAreaNssaTranslatorRole

INTEGER {always (1),candidate (2)}

Read-create

Indicates an NSSA border router's ability to perform NSSA translation of type-7 LSAs into type-5 LSAs.

Currently, the maximum access is read-only; the default value candidate(2) is supported only.

1.3.6.1.2.1.14.2.1.12

ospfAreaNssaTranslatorState

INTEGER {enabled (1),elected (2),disabled (3)}

Read-only

Indicates if and how an NSSA border router is performing NSSA translation of type-7 LSAs into type-5 LSAs. When this object is set to enabled, the NSSA Border router's OspfAreaNssaExtTranslatorRole has been set to always. When this object is set to elected, a candidate NSSA Border router is Translating type-7 LSAs into type-5. When this object is set to disabled, a candidate NSSA border router is NOT translating type-7 LSAs into type-5.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.2.1.13

ospfAreaNssaTranslatorStabilityInterval

Integer32 (0..'7FFFFFFF'h)

Read-create

The number of seconds after an elected translator determines its services are no longer required, that it should continue to perform its translation duties.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.2.1.14

ospfAreaNssaTranslatorEvents

INTEGER (0..4294967295)

Read-only

Indicates the number of translator state changes that have occurred since the last boot-up. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.3.1.1

ospfStubAreaId

IpAddress

Read-only

The 32-bit identifier for the stub area. On creation, this can be derived from the instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.3.1.2

ospfStubTOS

Integer32 (0..30)

Read-only

The Type of Service associated with the metric. On creation, this can be derived from the instance. The returned value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.3.1.3

ospfStubMetric

Integer32 (0..'FFFFFF'h)

Read-create

The metric value applied at the indicated Type of Service. By default, this equals the least metric at the Type of Service among the interfaces to other areas.

Currently, the maximum access is read-only; the value ranges from 0 to 16777214.

1.3.6.1.2.1.14.3.1.4

ospfStubStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.3.1.5

ospfStubMetricType

INTEGER{ospfMetric (1),comparableCost (2),nonComparable (3)}

Read-create

This variable displays the type of metric advertised as a default route. Value range: {ospfMetric (1), comparableCost (2), nonComparable (3)}The default value is ospfMetric.

Currently, the maximum access is read-only; the return value 1 is supported only.

1.3.6.1.2.1.14.4.1.1

ospfLsdbAreaId

IpAddress

Read-only

The 32-bit identifier of the area from which the LSA was received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.4.1.2

ospfLsdbType

INTEGER{routerLink (1),networkLink (2),summaryLink (3),asSummaryLink (4),asExternalLink (5),multicastLink (6), nssaExternalLink (7),areaOpaqueLink (10)}

Read-only

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.4.1.3

ospfLsdbLsid

OCTET STRING (SIZE (4))

Read-only

The Link State ID is an LS Type Specific field containing either a Router ID or an IP address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.4.1.4

ospfLsdbRouterId

IpAddress

Read-only

The 32-bit number that uniquely identifies the originating router in the Autonomous System.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.4.1.5

ospfLsdbSequence

Integer32

Read-only

The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Therefore, a typical sequence number will be very negative. It is used to detect old and duplicate Link State Advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.4.1.6

ospfLsdbAge

Integer32

Read-only

This field is the age of the link state advertisement in seconds.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.4.1.7

ospfLsdbChecksum

Integer32

Read-only

This field is the checksum of the complete contents of the advertisement, excepting the age field.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.4.1.8

ospfLsdbAdvertisement

OCTET STRING(SIZE (1..65535))

Read-only

The entire link state advertisement, including its header.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.7.1.1

ospfIfIpAddress

OCTET STRING (SIZE (4))

Read-only

The IP address of this OSPF interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.7.1.2

ospfAddressLessIf

Integer32 (0..2147483647)

Read-only

For the purpose of easing the instancing of addressed and addressless interfaces; this variable takes the value 0 on interfaces with IP addresses and the corresponding value of ifIndex for interfaces having no IP address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.7.1.3

ospfIfAreaId

IpAddress

Read-create

A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.7.1.4

ospfIfType

INTEGER{broadcast (1),nbma (2),pointToPoint (3),pointToMultipoint (5)}

Read-create

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.7.1.5

ospfIfAdminStat

INTEGER { enabled (1), disabled (2) }

Read-create

The OSPF interface's administrative status. The value formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.7.1.6

ospfIfRtrPriority

Integer32 (0..'FF'h)

Read-create

The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the device is not eligible to become the designated router on this particular network. In the event of a tie in this value, devices will use their Router ID as a tie breaker. Value range: (0, 255). The default value is 1.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.7.1.7

ospfIfTransitDelay

Integer32 (0..3600)

Read-create

The estimated number of seconds it takes to transmit a link state update packet over this interface. The default value is 1.

Currently, the maximum access is read-only; the value ranges from 1 to 500.

1.3.6.1.2.1.14.7.1.8

ospfIfRetransInterval

Integer32 (0..3600)

Read-create

The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and Link State request packets. The default value is 5.

Currently, the maximum access is read-only; the value ranges from 1 to 3600.

1.3.6.1.2.1.14.7.1.9

ospfIfHelloInterval

Integer32 (1..'FFFF'h)

Read-create

The length of time, in seconds, between the Hello packets that the device sends on the interface. This value must be the same for all devices attached to a common network. The default value is 10.

Currently, the maximum access is read-only; the value ranges from 1 to 65535.

1.3.6.1.2.1.14.7.1.10

ospfIfRtrDeadInterval

Integer32 (0..'7FFFFFFF'h)

Read-create

The number of seconds that a device's Hello packets have not been seen before its neighbors declare the device down. The value is a multiple of the Hello interval, and the default multiple is 4. This value must be the same for all devices attached to a common network. Value range: (1, 23592600)

Currently, the maximum access is read-only; the value ranges from 1 to 235926000.

1.3.6.1.2.1.14.7.1.11

ospfIfPollInterval

Integer32 (0..'7FFFFFFF'h)

Read-create

The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi-access neighbor. The default value is 120.

Currently, the maximum access is read-only; the value ranges from 1 to 3600.

1.3.6.1.2.1.14.7.1.12

ospfIfState

INTEGER{down (1), loopback (2),waiting (3),pointToPoint (4),designatedRouter (5),backupDesignatedRouter (6),otherDesignatedRouter (7)}

Read-only

The OSPF Interface State.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.7.1.13

ospfIfDesignatedRouter

OCTET STRING (SIZE (4))

Read-only

The IP address of the designated router.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.7.1.14

ospfIfBackupDesignatedRouter

OCTET STRING (SIZE (4))

Read-only

The IP address of the backup designated router.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.7.1.15

ospfIfEvents

INTEGER (0..4294967295)

Read-only

The number of times this OSPF interface has changed its state or an error has occurred.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.7.1.16

ospfIfAuthKey

OCTET STRING (SIZE (0..256))

Read-create

The cleartext password used as an OSPF authentication key when simplePassword security is enabled. If the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Unauthenticated interfaces need no authentication key, and simple password authentication cannot use a key of more than 8 octets. When read, ospfIfAuthKey always returns an octet string of length zero.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.7.1.17

ospfIfStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.7.1.18

ospfIfMulticastForwarding

INTEGER{blocked (1),multicast (2),unicast (3)}

Read-create

The way multicasts should be forwarded on this interface: not forwarded, forwarded as data link multicasts, or forwarded as data link unicasts. Data link multicasting is not meaningful on point-to-point and NBMA interfaces, and setting ospfMulticastForwarding to 0 effectively disables all multicast forwarding. The default value is blocked.

Currently, the maximum access is read-only; the return value 1 is supported only.

1.3.6.1.2.1.14.7.1.19

ospfIfDemand

INTEGER{true(1),false(2)}

Read-create

Indicates whether Demand OSPF procedures should be performed on this interface.

Currently, the maximum access is read-only; the return value 1 is supported only.

1.3.6.1.2.1.14.7.1.20

ospfIfAuthType

INTEGER {none (0),simplePassword (1),md5 (2)}

Read-create

The authentication type specified for an interface. Note that this object can be used to engage in significant attacks against an OSPF device.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.7.1.21

ospfIfLsaCount

INTEGER (0..4294967295)

Read-only

The total number of link-local link state advertisements in this interface's link-local link state database.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.7.1.22

ospfIfLsaCksumSum

INTEGER (0..4294967295)

Read-only

The 32-bit unsigned sum of the Link State Advertisements' LS checksums contained in this interface's link-local link state database. The sum can be used to determine if there has been a change in the interface's link state database and to compare the interface link state database of devices attached to the same subnet.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.7.1.23

ospfIfDesignatedRouterId

IpAddress

Read-only

The Router ID of the designated router.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.7.1.24

ospfIfBackupDesignatedRouterId

IpAddress

Read-only

The Router ID of the backup designated router.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.8.1.1

ospfIfMetricIpAddress

OCTET STRING (SIZE (4))

Read-only

The IP address of this OSPF interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.8.1.2

ospfIfMetricAddressLessIf

Integer32 (0..2147483647)

Read-only

For the purpose of easing the instancing of addressed and addressless interfaces; this variable takes the value 0 on interfaces with IP addresses and the value of ifIndex for interfaces having no IP address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.8.1.3

ospfIfMetricTOS

Integer32 (0..30)

Read-only

The Type of Service metric being referenced. The returned value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.8.1.4

ospfIfMetricValue

Integer32 (0..'FFFF'h)

Read-create

The metric of using this Type of Service on this interface. The default value of the ToS 0 metric is 10^8 / ifSpeed.

Currently, the maximum access is read-only; the value ranges from 1 to 65535.

1.3.6.1.2.1.14.8.1.5

ospfIfMetricStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.9.1.1

ospfVirtIfAreaId

IpAddress

Read-only

This object indicates the transit area that the virtual link traverses. By definition, this is not 0.0.0.0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.9.1.2

ospfVirtIfNeighbor

IpAddress

Read-only

This object indicates the Router ID of the virtual neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.9.1.3

ospfVirtIfTransitDelay

Integer32 (0..3600)

Read-create

This object indicates the estimated number of seconds it takes to transmit a Link State update packet over this interface. By default, the value is 1.

Currently, the maximum access is read-only; the value ranges from 1 to 3600.

1.3.6.1.2.1.14.9.1.4

ospfVirtIfRetransInterval

Integer32 (0..3600)

Read-create

This object indicates the number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and Link State request packets. By default, the value is 5.

Currently, the maximum access is read-only; the value ranges from 1 to 3600.

1.3.6.1.2.1.14.9.1.5

ospfVirtIfHelloInterval

Integer32 (1..'FFFF'h)

Read-create

This object indicates the length of time, in seconds, between the Hello packets that the device sends on the interface. This value must be the same for the virtual neighbor.

Currently, the maximum access is read-only; the value ranges from 1 to 65535.

1.3.6.1.2.1.14.9.1.6

ospfVirtIfRtrDeadInterval

Integer32 (0..'7FFFFFFF'h)

Read-create

This object indicates the number of seconds that a device's Hello packets have not been seen before its neighbors declare the device down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor.

Currently, the maximum access is read-only; the value ranges from 1 to 235926000.

1.3.6.1.2.1.14.9.1.7

ospfVirtIfState

INTEGER{down (1),pointToPoint (4)}

Read-only

This object indicates the OSPF virtual interface states.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.9.1.8

ospfVirtIfEvents

INTEGER (0..4294967295)

Read-only

This object indicates the number of state that changes or error events on this virtual link.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.9.1.9

ospfVirtIfAuthKey

OCTET STRING(SIZE(0..256))

Read-create

This object indicates the cleartext password used as an OSPF authentication key when simple password security is enabled. If the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Unauthenticated interfaces need no authentication key, and simple password authentication cannot use a key of more than 8 octets. When read, ospfIfAuthKey always returns an octet string of length zero.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.9.1.10

ospfVirtIfStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.9.1.11

ospfVirtIfAuthType

INTEGER {none (0),simplePassword (1),md5 (2)}

Read-create

This object indicates the authentication type specified for a virtual interface. Note that this object can be used to engage in significant attacks against an OSPF device.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.9.1.12

ospfVirtIfLsaCount

INTEGER (0..4294967295)

Read-only

This object indicates the total number of link-local link state advertisements in this virtual interface's link-local link state database.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.9.1.13

ospfVirtIfLsaCksumSum

INTEGER (0..4294967295)

Read-only

This object indicates the 32-bit unsigned sum of the link state advertisements' LS checksums contained in this virtual interface's link-local link state database. The sum can be used to determine if there has been a change in the virtual interface's link state database, and to compare the virtual interface link state database of the virtual neighbors.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.10.1.1

ospfNbrIpAddr

OCTET STRING (SIZE (4))

Read-only

The IP address this neighbor is using in its IP source address. Note that, on addressless links, this will not be 0.0.0.0 but the address of another of the neighbor's interfaces.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.10.1.2

ospfNbrAddressLessIndex

Integer32 (0..2147483647)

Read-only

On an interface having an IP address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.10.1.3

ospfNbrRtrId

IpAddress

Read-only

A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.10.1.4

ospfNbrOptions

Integer32

Read-only

A bit mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the system will process Type of Service metrics other than ToS 0. If zero, the neighbor will ignore all metrics except the ToS 0 metric. Bit 1, if set, indicates that the associated area accepts and operates on external information; if zero, it is a stub area. Bit 2, if set, indicates that the system is capable of routing IP multicast datagrams, that is that it implements the multicast extensions to OSPF. Bit 3, if set, indicates that the associated area is an NSSA. The default value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.10.1.5

ospfNbrPriority

Integer32 (0..'FF'h)

Read-create

The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.10.1.6

ospfNbrState

INTEGER {down (1),attempt (2),init (3),twoWay (4),exchangeStart (5),exchange (6),loading (7),full (8)}

Read-only

The state of the relationship with this neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.10.1.7

ospfNbrEvents

INTEGER (0..4294967295)

Read-only

The number of times this neighbor relationship has changed state or an error has occurred.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.10.1.8

ospfNbrLsRetransQLen

INTEGER (0..4294967295)

Read-only

The current length of the retransmission queue.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.10.1.9

ospfNbmaNbrStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.10.1.10

ospfNbmaNbrPermanence

INTEGER{dynamic (1),permanent (2)}

Read-only

This variable displays the status of the entry; 'dynamic' and 'permanent' refer to how the neighbor became known.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.10.1.11

ospfNbrHelloSuppressed

INTEGER{true(1),false(2)}

Read-only

Indicates whether Hellos are being suppressed to the neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.10.1.12

ospfNbrRestartHelperStatus

INTEGER {notHelping (1),helping (2)}

Read-only

Indicates whether the device is acting as a graceful restart helper for the neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.10.1.13

ospfNbrRestartHelperAge

INTEGER (0..4294967295)

Read-only

Remaining time in current OSPF graceful restart interval, if the device is acting as a restart helper for the neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.10.1.14

ospfNbrRestartHelperExitReason

INTEGER {none (1),inProgress (2),completed (3),timedOut (4),topologyChanged (5)}

Read-only

Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.11.1.1

ospfVirtNbrArea

IpAddress

Read-only

The Transit Area Identifier.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.11.1.2

ospfVirtNbrRtrId

IpAddress

Read-only

A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.11.1.3

ospfVirtNbrIpAddr

OCTET STRING (SIZE (4))

Read-only

The IP address this virtual neighbor is using.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.11.1.4

ospfVirtNbrOptions

Integer32

Read-only

A bit mask corresponding to the neighbor's options field. Bit 1, if set, indicates that the system will process Type of Service metrics other than ToS 0. If zero, the neighbor will ignore all metrics except the ToS 0 metric. Bit 2, if set, indicates that the system is network multicast capable, for example, that it implements OSPF multicast routing.

Currently, the values of ospfVirtNbrOptions can only be 0.

1.3.6.1.2.1.14.11.1.5

ospfVirtNbrState

INTEGER{down (1),attempt (2),init (3),twoWay (4),exchangeStart (5),exchange (6),loading (7),full (8)}

Read-only

The state of the virtual neighbor relationship.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.11.1.6

ospfVirtNbrEvents

INTEGER (0..4294967295)

Read-only

The number of times this virtual link has changed its state or an error has occurred.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.11.1.7

ospfVirtNbrLsRetransQLen

INTEGER (0..4294967295)

Read-only

The current length of the retransmission queue.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.11.1.8

ospfVirtNbrHelloSuppressed

INTEGER{true(1),false(2)}

Read-only

Indicates whether Hellos are being suppressed to the neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.11.1.9

ospfVirtNbrRestartHelperStatus

INTEGER {notHelping (1),helping (2)}

Read-only

Indicates whether the device is acting as a graceful restart helper for the neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.11.1.10

ospfVirtNbrRestartHelperAge

INTEGER (0..4294967295)

Read-only

Remaining time in current OSPF graceful restart interval, if the device is acting as a restart helper for the neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.11.1.11

ospfVirtNbrRestartHelperExitReason

INTEGER {none (1),inProgress (2),completed (3),timedOut (4),topologyChanged (5)}

Read-only

Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.12.1.1

ospfExtLsdbType

INTEGER{asExternalLink (5)}

Read-only

The type of the link state advertisement. Each link state type has a separate advertisement format.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.12.1.2

ospfExtLsdbLsid

OCTET STRING (SIZE (4))

Read-only

The Link State ID is an LS Type Specific field containing either a Router ID or an IP address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.12.1.3

ospfExtLsdbRouterId

IpAddress

Read-only

The 32-bit number that uniquely identifies the originating router in the Autonomous System.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.12.1.4

ospfExtLsdbSequence

Integer32

Read-only

The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Therefore, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.12.1.5

ospfExtLsdbAge

Integer32

Read-only

This field is the age of the link state advertisement in seconds.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.12.1.6

ospfExtLsdbChecksum

Integer32

Read-only

This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.12.1.7

ospfExtLsdbAdvertisement

OCTET STRING(SIZE(36))

Read-only

The entire link state advertisement, including its header.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.14.1.1

ospfAreaAggregateAreaID

IpAddress

Read-only

The area within which the address aggregate is to be found.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.14.1.2

ospfAreaAggregateLsdbType

INTEGER{summaryLink (3),nssaExternalLink (7)}

Read-only

The type of the address aggregate. This field specifies the Lsdb type that this address aggregate applies to.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.14.1.3

ospfAreaAggregateNet

OCTET STRING (SIZE (4))

Read-only

The IP address of the net or subnet indicated by the range.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.14.1.4

ospfAreaAggregateMask

OCTET STRING (SIZE (4))

Read-only

The subnet mask that pertains to the net or subnet.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.14.1.5

ospfAreaAggregateStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.14.1.6

ospfAreaAggregateEffect

INTEGER{advertiseMatching (1),doNotAdvertiseMatching (2)}

Read-create

Subnets subsumed by ranges either trigger the advertisement of the indicated aggregate (advertiseMatching) or result in the subnet's not being advertised at all outside the area. The default value is advertiseMatching.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.14.1.7

ospfAreaAggregateExtRouteTag

INTEGER (0..4294967295)

Read-create

External route tag to be included in NSSA (type-7) LSAs.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.17.1.1

ospfLocalLsdbIpAddress

OCTET STRING (SIZE (4))

Not-accessible

The IP address of the interface from which the LSA was received if the interface is numbered.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.17.1.2

ospfLocalLsdbAddressLessIf

Integer32 (0..2147483647)

Not-accessible

The interface index of the interface from which the LSA was received if the interface is unnumbered.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.17.1.3

ospfLocalLsdbType

INTEGER { localOpaqueLink (9) }

Not-accessible

The type of the link state advertisement. Each link state type has a separate advertisement format.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.17.1.4

ospfLocalLsdbLsid

OCTET STRING (SIZE (4))

Not-accessible

The Link State ID is an LS Type Specific field containing a 32-bit identifier in IP address format; it identifies the piece of the routing domain that is being described by the advertisement.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.17.1.5

ospfLocalLsdbRouterId

IpAddress

Not-accessible

The 32-bit number that uniquely identifies the originating router in the Autonomous System.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.17.1.6

ospfLocalLsdbSequence

Integer32

Read-only

The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Therefore, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.17.1.7

ospfLocalLsdbAge

Integer32

Read-only

This field is the age of the link state advertisement in seconds.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.17.1.8

ospfLocalLsdbChecksum

Integer32

Read-only

This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.17.1.9

ospfLocalLsdbAdvertisement

OCTET STRING (SIZE (1..65535))

Read-only

The entire link state advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.18.1.1

ospfVirtLocalLsdbTransitArea

IpAddress

Not-accessible

The transit area that the virtual link traverses. By definition, this is not 0.0.0.0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.18.1.2

ospfVirtLocalLsdbNeighbor

IpAddress

Not-accessible

The Router ID of the virtual neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.18.1.3

ospfVirtLocalLsdbType

INTEGER { localOpaqueLink (9) }

Not-accessible

The type of the link state advertisement. Each link state type has a separate advertisement format.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.18.1.4

ospfVirtLocalLsdbLsid

OCTET STRING (SIZE (4))

Not-accessible

The Link State ID is an LS Type Specific field containing a 32-bit identifier in IP address format; it identifies the piece of the routing domain that is being described by the advertisement.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.18.1.5

ospfVirtLocalLsdbRouterId

IpAddress

Not-accessible

The 32-bit number that uniquely identifies the originating router in the Autonomous System.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.18.1.6

ospfVirtLocalLsdbSequence

Integer32

Read-only

The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Therefore, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.18.1.7

ospfVirtLocalLsdbAge

Integer32

Read-only

This field is the age of the link state advertisement in seconds.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.18.1.8

ospfVirtLocalLsdbChecksum

Integer32

Read-only

This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.18.1.9

ospfVirtLocalLsdbAdvertisement

OCTET STRING (SIZE (1..65535))

Read-only

The entire link state advertisement, including its header.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.19.1.1

ospfAsLsdbType

INTEGER {asExternalLink (5),asOpaqueLink (11)}

Not-accessible

The type of the link state advertisement. Each link state type has a separate advertisement format.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.19.1.2

ospfAsLsdbLsid

OCTET STRING (SIZE (4))

Not-accessible

The Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being described by the advertisement.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.19.1.3

ospfAsLsdbRouterId

IpAddress

Not-accessible

The 32-bit number that uniquely identifies the originating router in the Autonomous System.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.19.1.4

ospfAsLsdbSequence

Integer32

Read-only

The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Therefore, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.19.1.5

ospfAsLsdbAge

Integer32

Read-only

This field is the age of the link state advertisement in seconds.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.19.1.6

ospfAsLsdbChecksum

Integer32

Read-only

This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.19.1.7

ospfAsLsdbAdvertisement

OCTET STRING (SIZE (1..65535))

Read-only

The entire link state advertisement, including its header.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.20.1.1

ospfAreaLsaCountAreaId

IpAddress

Not-accessible

This entry Area ID.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.20.1.2

ospfAreaLsaCountLsaType

INTEGER {routerLink (1),networkLink (2),summaryLink (3),asSummaryLink (4),multicastLink (6),nssaExternalLink (7),areaOpaqueLink (10)}

Not-accessible

This entry LSA type.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.20.1.3

ospfAreaLsaCountNumber

INTEGER (0..4294967295)

Read-only

Number of LSAs of a given type for a given area.

This object is implemented as defined in the corresponding MIB files.