HUAWEI-DLDP-MIB

1.3.6.1.4.1.2011.5.25.173.1.1.1

hwDldpEnable

INTEGER{enabled(1),disabled(2)}

Read-write

This object identifies whether the DLDP protocol is enabled globally. This object has the following values:

• 1: enabled
• 2: disabled

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.2

hwDldpUnidirectionalShutdown

INTEGER

Read-write

This object specifies the mode of shutting down a port after a unidirectional link is found. This object has the following values:

• 1: auto
• 2: manual

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.3

hwDldpWorkMode

INTEGER

Read-write

This object identifies the working mode of the DLDP. This object has the following values:

• 1: normal
• 2: enhance

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.4

hwDldpAdvertInterval

Integer32

Read-write

This object specifies the interval of sending an advertisement message.

The value range is 1 to 100.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.5

hwDelayDownTimer

Integer32

Read-write

This object specifies the duration of the Delay Down timer.

The value range is 1 to 5.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.6

hwDldpAuthenMode

INTEGER

Read-write

This object specifies the authentication mode of the DLDP. This object has the following values:

• 1: none (authentication without a password)
• 2: MD5 (MD5 authentication mode)
• 3: simple (simple authentication mode)
• 4: SHA (SHA authentication mode)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.7

hwDldpMd5Password

OCTET STRING

Read-write

The value is a string of 6 to 16 case-sensitive characters in plain text and consists of at least two of the following: lowercase letters, uppercase letters, digits, and special characters excluding question marks (?) and spaces.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.8

hwDldpSimplePassword

OCTET STRING

Read-write

The value is a string of 6 to 16 case-sensitive characters in plain text and consists of at least two of the following: lowercase letters, uppercase letters, digits, and special characters excluding question marks (?) and spaces.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.13

hwDldpShaPassword

OCTET STRING

Read-write

The value is a string of 6 to 16 case-sensitive characters in plain text and consists of at least two of the following: lowercase letters, uppercase letters, digits, and special characters excluding question marks (?) and spaces.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.9.1.1

hwDldpPortIndex

Integer32(0..575)

not-accessible

This object specifies the index of an interface.

The value range is 0 to 575.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.9.1.2

hwDldpPortStateReset

INTEGER{true(1),false(2)}

Read-create

This object indicates whether the DLDP status of an interface is reset:

• 1: true (reset)
• 2: false (not reset)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.9.1.3

hwDldpPortState

INTEGER

Read-only

This object indicates the DLDP status of an interface:

• 1: initial
• 2: inactive
• 3: active
• 4: advertisement
• 5: probe
• 6: disable
• 7: delayDown
• 8: loop

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.9.1.4

hwDldpPortLinkState

INTEGER

Read-only

This object indicates the link status of an interface:

• 1: up
• 2: down

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.9.1.5

hwDldpResetStatistics

INTEGER{true(1),false(2)}

Read-create

This object indicates whether DLDP packet statistics on an interface are cleared:

• 1: true (cleared)
• 2: false (not cleared)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.9.1.6

hwDldpRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status of this table:

• CreateAndGo
• destroy

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.10.1.1

hwDldpNeighbourMacAddr

OCTET STRING (SIZE (6))

not-accessible

This object specifies the neighbor MAC address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.10.1.2

hwDldpNeighbourPortIndex

Integer32

not-accessible

This object specifies the index of a neighbor interface.

The value range is 0 to 65535.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.10.1.3

hwDldpNeighbourPortName

OCTET STRING

Read-only

This object specifies the name of a neighbor interface.

The value is a string of 0 to 255 characters.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.10.1.4

hwDldpNeighbourState

INTEGER

Read-only

This object indicates the status of a neighbor interface:

• 1: unknown
• 2: oneWay
• 3: twoWay

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.10.1.5

hwDldpNeighbourAgeTime

Integer32

Read-only

This object specifies the aging time of a neighbor port. It is three times as much as the time interval of the advertisement message.

The value range is 3 to 300.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.11.1.1

hwDldpIfIndex

INTEGER

not-accessible

This object indicates the interface index.

The value range is 0 to 65535.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.11.1.2

hwDldpIfStateReset

INTEGER{true(1),false(2)}

Read-create

This object indicates whether the DLDP status of an interface is reset:

• 1: true (reset)
• 2: false (not reset)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.11.1.3

hwDldpIfState

INTEGER

Read-only

This object indicates the DLDP status of an interface:

• 1: initial
• 2: inactive
• 3: active
• 4: advertisement
• 5: probe
• 6: disable
• 7: delayDown
• 8: loop

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.11.1.4

hwDldpIfLinkState

INTEGER

Read-only

This object indicates the link status of the interface:

• 1: up
• 2: down

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.11.1.5

hwDldpIfResetStatistics

INTEGER{true(1),false(2)}

Read-create

This object indicates whether DLDP packet statistics on an interface are cleared.

• 1: true (cleared)
• 2: false (not cleared)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.11.1.6

hwDldpIfRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status of this table:

• CreateAndGo
• destroy

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.12.1.1

hwDldpIfNeighbourMacAddr

OCTET STRING (SIZE (6))

not-accessible

This object specifies the neighbor MAC address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.12.1.2

hwDldpIfNeighbourIFIndex

Integer32

not-accessible

This object indicates the interface index.

The value range is 0 to 65535.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.12.1.3

hwDldpIfNeighbourPortName

OCTET STRING

Read-only

This object specifies the name of a neighbor interface.

The value is a string of 0 to 255 characters.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.12.1.4

hwDldpIfNeighbourState

INTEGER

Read-only

This object indicates the status of a neighbor interface:

• 1: unknown
• 2: oneWay
• 3: twoWay

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.1.12.1.5

hwDldpIfNeighbourAgeTime

Integer32

Read-only

This object specifies the aging time of a neighbor interface. It is three times the time interval of Advertisement messages.

The value range is 3 to 300.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.2.1.1.1

hwDldpPortStatisticsTx

INTEGER (0..4294967295)

Read-only

This object indicates the total number of the packets sent.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.2.1.1.2

hwDldpPortStatisticsRxTotal

INTEGER (0..4294967295)

Read-only

This object indicates the total number of the packets received.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.2.1.1.3

hwDldpPortStatisticsRxError

INTEGER (0..4294967295)

Read-only

This object indicates the number of the wrong packets received.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.2.1.1.4

hwDldpPortStatisticsRxLoop

INTEGER (0..4294967295)

Read-only

This object indicates the number of the self-loop packets received.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.2.1.1.5

hwDldpPortStatisticsRxValid

INTEGER (0..4294967295)

Read-only

This object indicates the number of the legal packets received.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.2.1.1.6

hwDldpPortStatisticsRxAuthenFail

INTEGER (0..4294967295)

Read-only

This object indicates the number of the received packets denoting authentication failure.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.2.2.1.1

hwDldpIfStatisticsTx

INTEGER (0..4294967295)

Read-only

This object indicates the total number of sent packets.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.2.2.1.2

hwDldpIfStatisticsRxTotal

INTEGER (0..4294967295)

Read-only

This object indicates the total number of received packets.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.2.2.1.3

hwDldpIfStatisticsRxError

INTEGER (0..4294967295)

Read-only

This object indicates the number of error packets received.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.2.2.1.4

hwDldpIfStatisticsRxLoop

INTEGER (0..4294967295)

Read-only

This object indicates the number of self-loop packets received.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.2.2.1.5

hwDldpIfStatisticsRxValid

INTEGER (0..4294967295)

Read-only

This object indicates the number of valid packets received.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.1.2.2.1.6

hwDldpIfStatisticsRxAuthenFail

INTEGER (0..4294967295)

Read-only

This object indicates the number of the received packets that fail to be authenticated.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.3.1

hwDldpUnidirectionalLink

hwDldpTrapInterfaceIndex

hwDldpTrapIfName

If the system detects a unidirectional link, the system gives an alarm, including the information of interface index.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.3.2

hwDldpLinkResume

hwDldpTrapInterfaceIndex

hwDldpTrapIfName

If a unidirectional link is recovered, the system gives an alarm, including the information of interface index.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.173.3.3

hwDldpLoopDetect

hwDldpTrapInterfaceIndex

hwDldpTrapIfName

This object indicates that a loop has been detected on an interface.

Same as the definition in the MIB file.

1.3.6.1.4.1.2011.5.25.173.3.4

hwDldpLoopResume

hwDldpTrapInterfaceIndex

hwDldpTrapIfName

This object indicates that the loop on an interface has been removed.

Same as the definition in the MIB file.