Q-BRIDGE-MIB

1.3.6.1.2.1.17.7.1.1.1

dot1qVlanVersionNumber

INTEGER{version1(1)}

Read-only

The version number of IEEE 802.1Q that this device supports.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.17.7.1.1.2

dot1qMaxVlanId

INTEGER (1..4094)

Read-only

The maximum IEEE 802.1Q VLAN-ID that this device supports.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.17.7.1.1.3

dot1qMaxSupportedVlans

INTEGER (0..4294967295)

Read-only

The maximum number of IEEE 802.1Q VLANs that this device supports.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.17.7.1.1.4

dot1qNumVlans

INTEGER (0..4294967295)

Read-only

The current number of IEEE 802.1Q VLANs that is configured in this device.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.17.7.1.1.5

dot1qGvrpStatus

INTEGER{enabled(1),disabled(2)}

{

enabled(1),

disabled(2)

}

Read-write

This object affects all GVRP Applicant and Registrar state machines. A transition from disabled(2) to enabled(1) will cause a reset of all GVRP state machines on all ports.

The value of this object must be retained across reinitializations of the management system.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.17.7.1.4.1

dot1qVlanNumDeletes

INTEGER (0..4294967295)

Read-only

The value of this object identifies the number of times for deleting VLAN entries from dot1qVlanCurrentTable.

Currently, the value can be 0 only.

1.3.6.1.2.1.17.7.1.4.4

dot1qNextFreeLocalVlanIndex

Integer32(0|4096..2147483647)

Read-only

The next available value for dot1qVlanIndex of a local VLAN entry in dot1qVlanStaticTable.

A row creation operation in this table for an entry with a local VlanIndex value may fail if the current value of this object is not used as the index.

At present, this function is not supported and the value of this object can be 0 only.

1.3.6.1.2.1.17.7.1.4.9

dot1qConstraintSetDefault

Integer32(0..65535)

Read-write

The identity of the constraint set to which a VLAN belongs, if there is not an explicit entry for that VLAN in dot1qLearningConstraintsTable.

The value of this object must be retained across reinitializations of the management system.

Currently, the maximum access is read-only; the value of this object can be 0 only.

1.3.6.1.2.1.17.7.1.4.10

dot1qConstraintTypeDefault

INTEGER

{

independent(1),

shared(2)

}

Read-write

The type of constraint set to which a VLAN belongs, if there is not an explicit entry for that VLAN in dot1qLearningConstraintsTable.

The types are as defined for dot1qConstraintType.

Currently, the maximum access is read-only; the value of this object can be independent(1) only.

1.3.6.1.2.1.17.7.1.4.2.1.1

dot1qVlanTimeMark

TimeTicks

Not-accessible

A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.

It is used as the index and the value can be 0 only.

1.3.6.1.2.1.17.7.1.4.2.1.2

dot1qVlanIndex

Unsigned32

Not-accessible

The VLAN-ID or other identifier referring to this VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.17.7.1.4.2.1.3

dot1qVlanFdbId

INTEGER (0..4294967295)

Read-only

The Filtering Database used by this VLAN. This value is allocated automatically by the device whenever the VLAN is created.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.17.7.1.4.2.1.4

dot1qVlanCurrentEgressPorts

OCTET STRING

Read-only

The set of ports that are transmitting traffic for this VLAN as either tagged or untagged frames.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.17.7.1.4.2.1.5

dot1qVlanCurrentUntaggedPorts

OCTET STRING

Read-only

This object indicates the list of ports added to the VLAN in the untagged mode.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.17.7.1.4.2.1.6

dot1qVlanStatus

INTEGER

{

other(1),

permanent(2),

dynamicGvrp(3)

}

Read-only

This object indicates the status of this entry.

• other(1): the VLAN is being used until the following two status changes occur:

• permanent(2): this entry, corresponding to an entry in dot1qVlanStaticTable, is currently in use and will remain so after the next reset of the device. The port lists for this entry include ports from the equivalent dot1qVlanStaticTable entry and ports learned dynamically.

• dynamicGvrp(3): this entry is currently in use and will remain so until removed by GVRP. There is no static entry for this VLAN, and it will be removed when the last port leaves the VLAN.

Currently, the value can be permanent(2) only.

1.3.6.1.2.1.17.7.1.4.2.1.7

dot1qVlanCreationTime

INTEGER (0..4294967295)

Read-only

The value of sysUpTime when this VLAN was created.

Currently, the value of this object can be 0 days 00h:00m:00s.00th only.

1.3.6.1.2.1.17.7.1.4.3.1.1

dot1qVlanStaticName

SnmpAdminString(SIZE(0..32))

Read-create

This object indicates VLAN name.

Currently, the maximum access is read-only.

1.3.6.1.2.1.17.7.1.4.3.1.2

dot1qVlanStaticEgressPorts

OCTET STRING

Read-create

This object indicates the list of ports to be added to a VLAN.

Currently, the maximum access is read-only.

1.3.6.1.2.1.17.7.1.4.3.1.3

dot1qVlanForbiddenEgressPorts

OCTET STRING

Read-create

The set of ports that are prohibited by management from being included in the egress list for this VLAN.

The default value is null.

Currently, the maximum access is read-only.

1.3.6.1.2.1.17.7.1.4.3.1.4

dot1qVlanStaticUntaggedPorts

OCTET STRING

Read-create

This object indicates the list of ports to be added to a VLAN in untag mode.

Currently, the maximum access is read-only.

1.3.6.1.2.1.17.7.1.4.3.1.5

dot1qVlanStaticRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the status of this entry.

Currently, the maximum access is read-only.

1.3.6.1.2.1.17.7.1.4.5.1.1

dot1qPvid

Unsigned32

Read-write

This object indicates the PVID on the interface.

The value ranges from 0 to 4094. If the value is 0, the dot1qPvid object is restored to the default value.

1.3.6.1.2.1.17.7.1.4.5.1.2

dot1qPortAcceptableFrameTypes

INTEGER

{

admitAll(1),

admitOnlyVlanTagged(2)

}

Read-write

The value of this object identifies the type of frame that the interface permits to receive.

• When this is admitOnlyVlanTagged(2), the device will discard untagged frames or Priority-Tagged frames received on this port.

• When admitAll(1), untagged frames or Priority-Tagged frames received on this port will be accepted and assigned to a VID based on the PVID and VID Set for this port.

This control does not affect VLAN-independent Bridge Protocol Data Unit (BPDU) frames, such as GVRP and Spanning Tree Protocol (STP). It does not affect VLAN dependent BPDU frames, such as GMRP.

Currently, the maximum access is read-only.

1.3.6.1.2.1.17.7.1.4.5.1.3

dot1qPortIngressFiltering

INTEGER{true(1),false(2)}

{

true(1),

false(2)

}

Read-write

• When this is true(1), the device will discard incoming frames for VLANs that do not include this Port in its Member set.

• When false(2), the port will accept all incoming frames.

This control does not affect VLAN-independent BPDU frames, such as GVRP and STP. It does affect VLAN dependent BPDU frames, such as GMRP.

Currently, the maximum access is read-only; the return value is always 1 when this field is queried.

1.3.6.1.2.1.17.7.1.4.5.1.4

dot1qPortGvrpStatus

INTEGER{enabled(1),disabled(2)}

{

enabled(1),

disabled(2)

}

Read-only

The state of GVRP operation on this port.

• The value enabled(1) indicates that GVRP is enabled on this port, as long as dot1qGvrpStatus is also enabled for this device.

• The value disabled(2) indicates that dot1qGvrpStatus is still enabled on the device, but GVRP is disabled on this port. Any GVRP packets received will be silently discarded, and no GVRP registrations will be propagated from other ports.

Currently, the maximum access is read-only; the value of this object can be disabled(2) only.

1.3.6.1.2.1.17.7.1.4.5.1.5

dot1qPortGvrpFailedRegistrations

INTEGER (0..4294967295)

Read-only

The total number of failed GVRP registrations, for any reason, on this port.

Currently, the value of this object can be 0 only.

1.3.6.1.2.1.17.7.1.4.5.1.6

dot1qPortGvrpLastPduOrigin

MacAddress(SIZE(6))

Read-only

The Source MAC Address of the last GVRP message received on this port.

Currently, the value of this object can be 00:00:00:00:00:00 only.

1.3.6.1.2.1.17.7.1.4.8.1.1

dot1qConstraintVlan

Unsigned32

Not-accessible

This object indicates the index of this table, identifying the constrained VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.17.7.1.4.8.1.2

dot1qConstraintSet

Integer32(0..65535)

Not-accessible

This object indicates the index of this table, identifying the constraint setting of a VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.17.7.1.4.8.1.3

dot1qConstraintType

INTEGER

{

independent(1),

shared(2)

}

Read-create

The value of this object identifies the constraint type of a VLAN.

• independent(1) indicates that the VLAN uses a filtration database independently from all other VLANs with the same setting.

• shared(2) indicates that VLANs with the same setting share one filtration database.

Currently, the maximum access is read-only.

1.3.6.1.2.1.17.7.1.4.8.1.4

dot1qConstraintStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status.

Currently, the maximum access is read-only.