HUAWEI-CONFIG-MAN-MIB

1.3.6.1.4.1.2011.6.10.1.1.1

hwCfgRunModifiedLast

INTEGER (0..4294967295)

Read-only

The object indicates the latest time when you perform the SET operation on the NMS.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.2

hwCfgRunSavedLast

INTEGER (0..4294967295)

Read-only

The object indicates the latest time when the running configuration is saved.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.3

hwCfgStartModifiedLast

Timeticks

Read-only

The object indicates the latest time when the startup configuration file is modified.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.4

hwCfgLogLimitedEntries

Integer32 (0..2147483647)

Read-only

The value of the object identifies the maximum number of lines in the log table. Now the value supported by the system is 10.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.5

hwCfgLogDeletedEntries

INTEGER (0..4294967295)

Read-only

The object indicates the number of entries deleted from the log table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.6

hwCfgLogWantBackup

INTEGER{true(1),false(2)}

Read-write

The object indicates whether the log supports hot backup. The default value is true.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.1

hwCfgOperateGlobalEntryLimit

Integer32 (1..10)

Read-only

The value of the object identifies the maximum number of lines in the operation table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.2

hwCfgOperateEntryAgeOutTime

Integer32 (1..60)

Read-write

The value of the object identifies the aging time of the operation. The default value is 5.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.3

hwCfgOperateResultGlobalEntryLimit

Integer32 (1..50)

Read-write

The value of the object identifies the maximum number of lines in the operation result table. The default value is 5.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.7

hwCfgOperateCompareConfig

INTEGER{initial(0),same(1),different(2)}

Read-write

The current configuration is compared with the one saved in the system.

• 1: indicates that the configurations are the same.
• 2: indicates that the configurations are different.

1.3.6.1.4.1.2011.6.10.1.2.8

hwCfgRestoreErrCode

INTEGER{warning(1),fileOpenFail(2),fileNotExist(3),fileVerifyFail(4),other(5)}

accessible-for-notify

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.4.1

hwCfgOperateLockConfigDataStore

INTEGER

{

inactive(1),

active(2)

}

Read-write

Config data unit lock/unlock controller. If active(2) is set, the lock will be locked if no one locked it before.

If inactive(1) is set, the lock will be unlocked if the current user locked it before.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.3.1

hwCfgSaveAutoInterval

Integer32(0|30..43200)

Read-write

By default, the autosave function is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.3.2

hwCfgSaveAutoTime

OCTET STRING (SIZE (8 | 11))

Read-only

The object records the latest date and time when the current configurations were saved automatically in the system.

Currently, the value supported is 8 and 11.

1.3.6.1.4.1.2011.6.10.1.3.4

hwCfgSaveAutoCpuLimit

Integer32(1..60)

Read-write

The value of this object identifies the threshold of the CPU usage during the autosave operation.

The value ranges from 1 to 60. By default, the value is 50.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.3.6

hwCfgSaveAutoDelay

Integer(1..60)

Read-write

This object indicates the delay for automatically saving configurations in response to configuration changes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.3.3

hwCfgSaveManualTime

OCTET STRING (SIZE (8 | 11))

Read-only

The object records the latest date and time when the current configurations were saved manually in the system.

Currently, the value supported is 8 and 11.

1.3.6.1.4.1.2011.6.10.1.1.7.1.1

hwCfgLogIndex

Integer32 (SIZE (1..2147483647))

Not-accessible

The value of this object identifies configuration log.

Currently, the maximum access is accessible-for-notify.

1.3.6.1.4.1.2011.6.10.1.1.7.1.2

hwCfgLogTime

INTEGER (0..4294967295)

Read-only

The object indicates the sysUpTime when the configuration log was generated.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.7.1.3

hwCfgLogSrcCmd

INTEGER{cmdLine(1), snmp(2),netconf(3),other(4)}

Read-only

The value of the object indicates the configuration tool, command line, SNMP, or other modes adopted when the configuration changes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.7.1.4

hwCfgLogSrcData

INTEGER{erase(1),runningData(2),commandSource(3),startupData(4),local(5),netFtp(6), hotPlugging(7)}

Read-only

The value of the object identifies the data source used when the configuration changes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.7.1.5

hwCfgLogDesData

INTEGER{unknown(1),runningData(2), commandSource(3),startupData(4),local(5), netkFtp(6), hotPlugging(7) }

Read-only

The value of the object identifies the destination data used when the configuration changes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.7.1.6

hwCfgLogTerminalType

INTEGER{notApplicable(1), unknown(2), console(3), terminal(4), virtual(5), auxiliary(6) }

Read-only

The value of the object identifies the terminal type used when the configuration changes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.7.1.7

hwCfgLogTerminalUser

DisplayString (SIZE (0..256))

Read-only

The object indicates the terminal user when the configuration changes.

Currently, the value range of 0 to 64 is supported.

1.3.6.1.4.1.2011.6.10.1.1.7.1.8

hwCfgLogTerminalNum

Integer32

Read-only

The value of the object identifies the terminal number used when the configuration changes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.7.1.9

hwCfgLogTerminalLocation

DisplayString (SIZE (0..64))

Read-only

The object indicates the terminal location used when the configuration changes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.7.1.10

hwCfgLogCmdSrcAddress

OCTET STRING (SIZE (4))

Read-only

The object indicates the address of the command source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.7.1.11

hwCfgLogVirHost

DisplayString (SIZE (0..64))

Read-only

The object indicates the virtual host name.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.7.1.12

hwCfgLogUserName

DisplayString (SIZE (0..256))

Read-only

The object indicates the FTP user name. The object is valid only when the value of the hwCfgLogSrcData or the hwCfgLogDesData is netkFtp(6); otherwise, the object is a string of 0 characters.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.7.1.13

hwCfgLogServerAddress

OCTET STRING (SIZE (4))

Read-only

The object indicates the FTP server address. The object is valid only when the value of the hwCfgLogSrcData or the hwCfgLogDesData is netkFtp(6); otherwise, the value of the object is 0.0.0.0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.7.1.14

hwCfgLogFile

DisplayString (SIZE (0..64))

Read-only

The object indicates the file name. The object is valid only when the value of the hwCfgLogSrcData or the hwCfgLogDesData is netkFtp(6); otherwise, the object is a string of 0 characters.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.1

hwCfgOperateIndex

Integer32 (1..2147483647)

Not-accessible

The value of this object identifies operation.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.2

hwCfgOperateType

INTEGER{running2Startup(1),startup2Running(2),running2Net(3),net2Running(4),net2Startup(5),startup2Net(6)}

Read-create

The value of the object identifies the operation type.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.3

hwCfgOperateProtocol

INTEGER{ftp(1)tftp(2)sftp(3)}

Read-create

The value of the object identifies the used protocol.

FTP or TFTP is insecure. Therefore, configuring SFTP is recommended.

This object is implemented as defined in the corresponding MIB files.

When this object is set to sftp(3), only a password can be used for authentication. If a public key is used, the authentication fails.

1.3.6.1.4.1.2011.6.10.1.2.4.1.4

hwCfgOperateFileName

DisplayString (SIZE (1..128))

Read-create

The object indicates the file name.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.5

hwCfgOperateServerAddress

OCTET STRING (SIZE (4))

Read-create

The object indicates the address of the server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.6

hwCfgOperateUserName

DisplayString (SIZE (1..40))

Read-create

The object indicates the FTP user name.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.7

hwCfgOperateUserPassword

DisplayString (SIZE (0..40))

Read-create

The object indicates the FTP user password.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.8

hwCfgOperateEndNotificationSwitch

INTEGER{true(1),false(2)}

Read-create

The object indicates whether the Trap message is sent when the operation is complete.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.9

hwCfgOperateRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

The object indicates the status of the operation row.

When the status is Active, the following situations occur:

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.10

hwCfgOperateServerPort

Integer32(1..65535)

Read-create

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.11

hwCfgOperateSourceAddress

OCTET STRING (SIZE (4))

Read-create

This object indicates the source IP address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.12

hwCfgOperateSourceInterface

OCTET STRING(SIZE (1..47))

Read-create

This object indicates the source interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.13

hwCfgOperateOnError

INTEGER

{

continueOnError(1),

stopOnError(2),

rollbackOnError(3)

}

read-create

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.17

hwCfgOperateServerAddressType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

read-create

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.18

hwCfgOperateServerAddressNet

OCTET STRING (SIZE (0..255))

read-create

This object identifies an IP address that an FTP, TFTP, or SFTP server uses or a host name.

Currently, the object does not support IPv4 addresses.

1.3.6.1.4.1.2011.6.10.1.2.4.1.19

hwCfgOperateVpnInstance

DisplayString (SIZE (0..31))

read-create

This object indicates the VPN instance name that through which to transfer the file.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.5.1.1

hwCfgOperateResultIndex

Integer (1..2147483647)

Not-accessible

The value of this object identifies operation result.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.5.1.2

hwCfgOperateResultOptIndex

Integer (1..2147483647)

Read-only

The value of the object identifies the operation index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.5.1.3

hwCfgOperateResultOpType

INTEGER

{

running2Startup(1),

startup2Running(2),

running2Net(3),

net2Running(4),

net2Startup(5),

startup2Net(6)

}

Read-only

The value of the object identifies the operation type.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.5.1.4

hwCfgOperateState

INTEGER

{

opInProgress(1),

opSuccess(2),

opInvalidOperation(3),

opInvalidProtocol(4),

opInvalidSourceName(5),

opInvalidDestName(6),

opInvalidServerAddress(7),

opDeviceBusy(8),

opDeviceOpenError(9),

opDeviceError(10),

opDeviceNotProgrammable(11),

opDeviceFull(12),

opFileOpenError(13),

opFileTransferError(14),

opFileChecksumError(15),

opNoMemory(16),

opAuthFail(17),

opTimeOut(18),

opUnknownFailure(19),

opAbort(20),

opInvalidSourceAddress(21),

opInvalidSourceInterface(22),

opCmdExecuteFail(23)

}

Read-only

The value of the object identifies the operating status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.5.1.5

hwCfgOperateTime

INTEGER (0..4294967295)

Read-only

The object indicates the operation time.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.5.1.6

hwCfgOperateEndTime

INTEGER (0..4294967295)

Read-only

The object indicates the time when the operation is complete.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.5.1.7

hwCfgOperateTransferProgress

Integer32 (1..100 | 65535)

Read-only

The value of this object identifies the file transfer progress.

If this object is set to 65535, the file size cannot be obtained when TFTP or SFTP is used to upload or download a file on the NMS. As a result, a transfer progress cannot be calculated.

1.3.6.1.4.1.2011.6.10.1.2.5.1.8

hwCfgOperateErrorReason

DisplayString (SIZE (1..255))

Read-only

This object indicates the cause of the operation failure.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.10.1.3.7.1.1

hwCfgBackupIndex

Integer32 (0..4)

accessible-for-notify

Index of the backup server table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.10.1.3.7.1.2

hwCfgBackupServerIp

OCTET STRING (SIZE (4))

Read-create

IP address of the backup server.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.10.1.3.7.1.3

hwCfgBackupProtocol

INTEGER

{

ftp(1),

tftp(2),

sftp(3)

}

Read-create

Transmission mode of the backup server.

• ftp: FTP

• tftp: TFTP

• sftp: SFTP

FTP or TFTP is insecure. Therefore, configuring SFTP is recommended.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.10.1.3.7.1.4

hwCfgBackupUser

DisplayString (SIZE (1..64))

Read-create

Name of a user that accesses the backup server.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.10.1.3.7.1.5

hwCfgBackupPassword

OCTET STRING (SIZE (0..392))

Read-create

Password of a user that accesses the backup server.

In the case of a plaintext password, the password length ranges from 1 to 16. In the case of a ciphertext password, the password length ranges from 24 to 32.

Currently, the value range is (SIZE (0..16 | 24 | 32)).

1.3.6.1.4.1.2011.6.10.1.3.7.1.6

hwCfgBackupServerPath

DisplayString (SIZE (1..64))

Read-create

Path of the backup server.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.10.1.3.7.1.7

hwCfgBackupRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

Row status of the backup server table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.10.1.3.7.1.8

hwCfgBackupResult

DisplayString (SIZE (1..64))

Read-only

Latest backup result.

This object is used to send trap information. This object cannot be viewed.

1.3.6.1.4.1.2011.6.10.1.3.7.1.9

hwCfgBackupVpnInstance

DisplayString (SIZE (0..31))

Read-create

VPN instance to which configuration files are sent.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.10.1.3.7.1.10

hwCfgBackupServerPort

SYNTAX Integer32 (1..65535)

Read-create

The port number of the server to which to the device backup configuration automatically.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.10.1.4.2.1.1

hwCfgOperateLevelUsersSessionID

Integer (-1..2147483647)

Read-only

This object indicates the session ID of the user.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.4.2.1.2

hwCfgOperateLevelUsersSessionDesc

OCTET STRING (SIZE (1..64))

Read-only

This object indicates descriptions of the user.

Currently, the value range of 1 to 128 is supported.

1.3.6.1.4.1.2011.6.10.1.4.2.1.3

hwCfgOperateLevelUsersName

OCTET STRING (SIZE (1..64))

Read-only

This object indicates the user name.

Currently, the value range of 1 to 253 is supported.

1.3.6.1.4.1.2011.6.10.1.4.2.1.4

hwCfgOperateLevelUsersLockedTime

OCTET STRING (SIZE (1..64))

Read-only

This object indicates the user's login time.

Currently, the value range of 1 to 128 is supported.

1.3.6.1.4.1.2011.6.10.1.4.2.1.5

hwCfgOperateLevelUsersIPAddr

OCTET STRING (SIZE (1..64))

Read-only

This object indicates the user's IP address.

Currently, the value range of 1 to 128 is supported.

1.3.6.1.4.1.2011.6.10.1.4.2.1.6

hwCfgOperateLevelUsersLastCfgTime

OCTET STRING (SIZE (1..64))

Read-only

This object indicates the time when a user performed the last configuration.

Currently, the value range of 1 to 64 is supported.

1.3.6.1.4.1.2011.6.10.1.4.2.1.7

hwCfgOperateLevelUsersTimeout

Integer32 (1..7200)

Read-only

Unlock without configuration seconds, 1-7200, the default is 30.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.2.1

hwCfgManEventlog

This notification is generated when the configuration is changed.

1.3.6.1.4.1.2011.6.10.2.5

hwCfgB2STransferFail

• hwCfgBackupIndex
• hwCfgBackupServerIp
• hwCfgBackupProtocol
• hwCfgBackupResult

This object indicates that the configuration fails to be backed up to the server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.2.6

hwCfgB2SOperate

None

This object indicates that the device starts to back up the configuration.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.2.2

hwCfgOperateCompletion

This notification is sent when the configuration operation is complete.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.2.7

hwCfgRestoreFail

hwCfgRestoreErrCode

Failed to restore the system configurations.

This object is implemented as defined in the corresponding MIB file.