No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Enterprise
Worldwide
Huawei Global - English
Search
Support Documentation
S12700 and S12700E V200R019C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
HUAWEI-QINQ-MIB

HUAWEI-QINQ-MIB

Functions Overview

HUAWEI-QINQ-MIB describes the QinQ configuration in the system, interface, or sub-interface view.

In v1.00, the enhanced QinQ features, including the BPDU tunnel, Ethernet type, and well-known MAC addresses of BPDUs, are configured.

The OID of the root object is:

iso(1).org(3). dod(6).internet(1).private(4).enterprises(1).huawei(2011).huaweiMgmt(5).hwDatacomm(25).hwQinQ(116).

Relationship Between the Tables

Figure 104-1 Relationship between sub-interface QinQ configuration tables

Figure 104-2 Relationship between hwQinQStubIfTermTable and hwQinQStaticARPCfgTable configuration tables

Description of Single Objects

hwQinQSystemBridgeRole

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.116.1.2

hwQinQSystemBridgeRole

INTEGER

{

provider(2),

customer(1)

}

Read-write

The value of this object identifies the role of the device.

  • 1: customer
  • 2: provider

This object is implemented as defined in the corresponding MIB files.

hwQinQSystemWellKnowMac

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.116.1.1

hwQinQSystemWellKnowMac

OCTET STRING (SIZE (6))

Read-write

This object indicates the specified multicast address of a BPDU.

This object is implemented as defined in the corresponding MIB files.

Description of MIB Tables

hwQinQBpduTunnelTable

hwQinQBpduTunnelTable is set in the Layer 2 interface view.

The index of this table is hwQinQBpduTunnelIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.116.2.1.1.1

hwQinQBpduTunnelIndex

Integer

Not-accessible

The value of this object identifies the interface index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.1.1.3

hwQinQBpduTunnelEnableOneQBpduTunnel

INTEGER{enabled(1),disabled(2)}

Read-write

The value of this object identifies whether the function of the BPDU tunnel with one tag is enabled.

  • 1:enabled
  • 2:disabled

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.1.1.4

hwQinQBpduTunnelEnableBpduTag

INTEGER{enabled(1),disabled(2)}

Read-only

This object indicates that BPDUs are transparently transmitted across the public network.

  • 1:enabled
  • 2:disabled

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.1.1.5

hwQinQBpduTunnelEnableTwoQBpduTunnel

INTEGER{enabled(1),disabled(2)}

Read-only

This object indicates whether the interface permits the BPDUs with tags to pass.

  • 1:enabled
  • 2:disabled

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.1.1.6

hwQinQBpduTunnelCustomerBpduTag

Integer

Read-write

This integer specifies the number of tags to be added during the transparent transmission of BPDUs to distinguish the subnets of different BPDUs.

The value ranges from 0 to 4094.0 indicates the default configuration, and the flag to delete a configured.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

  • Before hwQinQBpduTunnelEnableTwoQBpduTunnel is enabled, hwQinQBpduTunnelCustomerBpduTagListLow, hwQinQBpduTunnelCustomerBpduTagListHigh cannot be set.

  • Before hwQinQBpduTunnelEnableBpduTag is enabled, hwQinQBpduTunnelCustomerBpduTag cannot be set.

  • The settings of hwQinQBpduTunnelEnableOneQBpduTunnel and hwQinQBpduTunnelEnableTwoQBpduTunnel, hwQinQBpduTunnelCustomerBpduTagListLow, hwQinQBpduTunnelCustomerBpduTagListHigh are mutually exclusive.

  • The settings of hwQinQBpduTunnelEnableBpduTag, hwQinQBpduTunnelCustomerBpduTag and hwQinQBpduTunnelEnableTwoQBpduTunnel, hwQinQBpduTunnelCustomerBpduTagListLow, hwQinQBpduTunnelCustomerBpduTagListHigh are mutually exclusive.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

None.

hwQinQModeCfgTable

This table is used to set the interface to run in QinQ or common mode and the Ethernet encapsulation type.

The index of this table is hwQinQModeCfgIfIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.116.2.10.1.1

hwQinQModeCfgIfIndex

INTEGER

Not-accessible

This object indicates the interface index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.10.1.2

hwQinQModeCfgMode

INTEGER

{

common(1),

qinq(2)

}

Read-write

The value of this object identifies the mode of the interface.

  • 1: common
  • 2: QinQ

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.10.1.3

hwQinQEtherType

Unsigned32 ('600'h..'ffff'h)

Read-write

This object indicates the EthType in the outer tag. The value ranges from 0x0600 to 0xffff.

By default, the value is 0x8100.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table can be modified without restriction.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

None.

hwQinQSubIfStackingStatTable

This table is used to display the number of packets and bytes received and sent on the VLAN stacking sub-interface.

The index of this table is hwQinQSubIfStackingStatIfIndex.hwQinQSubIfStackingStatCEVlan.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.116.2.3.1.1

hwQinQSubIfStackingStatIfIndex

INTEGER

Not-accessible

This object indicates the index of the VLAN stacking sub-interface enabled with the statistics function.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.3.1.2

hwQinQSubIfStackingStatCEVlan

INTEGER (1..4094)

Not-accessible

This object indicates the CE VLAN ID of the VLAN stacking sub-interface.

Currently, the value range of 1 to 4094 is supported.

1.3.6.1.4.1.2011.5.25.116.2.3.1.3

hwQinQSubIfStackStatGroupId

Integer (1..16)

Read-only

This object specifies the ID of the group that VLAN termination sub-interfaces need to join. The value ranges from 1 to 16.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.3.1.4

hwQinQSubIfStackingStatOutPackets

INTEGER (0..18446744073709551615)

Read-only

The value of this object identifies the number of packets sent by the VLAN stacking sub-interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.3.1.5

hwQinQSubIfStackingStatOutBytes

INTEGER (0..18446744073709551615)

Read-only

The value of this object identifies the number of bytes sent by the VLAN stacking sub-interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.3.1.6

hwQinQSubIfStackingStatInPackets

INTEGER (0..18446744073709551615)

Read-only

The value of this object identifies the number of packets received by the VLAN stacking sub-interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.3.1.7

hwQinQSubIfStackingStatInBytes

INTEGER (0..18446744073709551615)

Read-only

The value of this object identifies the number of bytes received by the VLAN stacking sub-interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.3.1.8

hwQinQSubIfStackStatOutBdPackets

INTEGER (0..18446744073709551615)

Read-only

The value of this object identifies the number of broadcast packets sent by the VLAN stacking sub-interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.3.1.9

hwQinQSubIfStackStatInBdPackets

INTEGER (0..18446744073709551615)

Read-only

The value of this object identifies the number of broadcast packets received by the VLAN stacking sub-interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.3.1.10

hwQinQSubIfStackStatOutMuPackets

INTEGER (0..18446744073709551615)

Read-only

The value of this object identifies the number of multicast packets sent by the VLAN stacking sub-interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.3.1.11

hwQinQSubIfStackStatInMuPackets

INTEGER (0..18446744073709551615)

Read-only

The value of this object identifies the number of multicast packets received by the VLAN stacking sub-interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.3.1.12

hwQinQSubIfStackStatOutUniPackets

INTEGER (0..18446744073709551615)

Read-only

The value of this object identifies the number of unicast packets sent by the VLAN stacking sub-interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.3.1.13

hwQinQSubIfStackStatInUniPackets

INTEGER (0..18446744073709551615)

Read-only

The value of this object identifies the number of unicast packets received by the VLAN stacking sub-interface.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The statistics are collected based on the group. So, the value of the statistics can be obtained only when the group ID is not zero and the group statistics function is enabled with the flag.

hwQinQSubIfTermTable

This table is used to create or delete a QinQ termination setting.

The index of this table is hwQinQSubIfTermIfIndex.hwQinQSubIfTermPEVlan.hwQinQSubIfTermCEVlanStart.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.116.2.4.1.1

hwQinQSubIfTermIfIndex

INTEGER

Not-accessible

This object indicates the index of the Sub-interface for QinQ VLAN Tag Termination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.4.1.2

hwQinQSubIfTermPEVlan

INTEGER (1..4094)

Not-accessible

This object indicates the PE VLAN ID permitted by the Sub-interface for QinQ VLAN Tag Termination.

Currently, the value range of 1 to 4094 is supported.

1.3.6.1.4.1.2011.5.25.116.2.4.1.3

hwQinQSubIfTermCEVlanStart

INTEGER (1..4094)

Not-accessible

This object indicates the start VID of the CE VLANs permitted by the Sub-interface for QinQ VLAN Tag Termination.

Currently, the value range of 1 to 4094 is supported.

1.3.6.1.4.1.2011.5.25.116.2.4.1.4

hwQinQSubIfTermCEVlanEnd

INTEGER (1..4094)

Read-create

This object indicates the end VID of CE VLANs permitted by the Sub-interface for QinQ VLAN Tag Termination.

Currently, the value range of 1 to 4094 is supported.

1.3.6.1.4.1.2011.5.25.116.2.4.1.6

hwQinQSubIfTermRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status.

  • 1: active
  • 2: notInService
  • 3: notReady
  • 4: createAndGo
  • 5: createAndWait
  • 6: destroy

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

  • The control VLAN on the sub-interface must be specified, and the control VLAN mode must be QinQ.

  • The number of CE VLAN IDs set for the termination of a sub-interface cannot be greater than 64. In the packets received by multiple termination sub-interfaces, CE VLAN IDs cannot overlap when PE VLAN IDs are identical.

For example, if the value of hwQinQSubIfTermPEVlan is set to 100, the value of hwQinQSubIfTermCEVlanStart is set to 500, and the value of hwQinQSubIfTermCEVlanEnd is set to 600, the value of hwQinQSubIfTermPEVlan cannot be set to 100, the value of hwQinQSubIfTermCEVlanStart cannot be set to 300, and the value of hwQinQSubIfTermCEVlanEnd cannot be set to 600. This is because overlapping exists between 300 to 500.

  • A sub-interface can be enabled with one of the three functions, that is, dotq1, QinQ, and VLAN stacking.

For example, if hwQinQSubIfTermTable is created, hwQinQSubIfVlanStackingTable VLAN dot1q cannot be created.

  • The setting of hwQinQSubIfTermPEVlan cannot overlap the setting of hwQinQSubIfVlanStackingCE in hwQinQSubIfVlanStackingTable.

  • Similarly, the setting of hwQinQSubIfTermPEVlan cannot overlap the setting of VLAN ID in the VLAN Type field.

  • If the termination sub-interface supports unicast routes, only one VLAN can be configured.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

None.

Access Restriction

None.

hwQinQSubIfVlanStackingTable

This table is used to create or delete a stacking setting on a sub-interface.

The index of this table is hwQinQSubIfStackingIfIndex.hwQinQSubIfStackingCEVlanStart.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.116.2.2.1.1

hwQinQSubIfStackingIfIndex

INTEGER

Not-accessible

This object indicates the index of the VLAN stacking sub-interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.2.1.2

hwQinQSubIfStackingCEVlanStart

INTEGER (1..4094)

Not-accessible

This object indicates the start VID of CE VLANs permitted by the VLAN stacking sub-interface.

Currently, the value range of 1 to 4094 is supported.

1.3.6.1.4.1.2011.5.25.116.2.2.1.3

hwQinQSubIfStackingCEVlanEnd

INTEGER (1..4094)

Read-create

This object indicates the end VID of CE VLANs permitted by the VLAN stacking sub-interface.

Currently, the value range of 1 to 4094 is supported.

1.3.6.1.4.1.2011.5.25.116.2.2.1.5

hwQinQSubIfStackingRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status:

  • 1: active
  • 2: notInService
  • 3: notReady
  • 4: createAndGo
  • 5: createAndWait
  • 6: destroy

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.2.1.6

hwQinQSubIfStackingPEVlan

Integer (0..4094)

Read-create

The value of this object identifies the VLAN ID of PE VLANs permitted by the VLAN stacking sub-interface.

Currently, the value range of 1 to 4094 is supported.

Creation Restriction

  • A maximum of 16 ranges can be configured.

  • CE VLAN IDs on a sub-interface cannot overlap.

For example, if the value of hwQinQSubIfStackingCEVlanStart is set to 500 and the value of hwQinQSubIfStackingCEVlanEnd is set to 600, the value of hwQinQSubIfStackingCEVlanStart cannot be set to 300 and the value of hwQinQSubIfStackingCEVlanEnd cannot be set to 600. This is because overlapping exists between 300 to 500.

  • A sub-interface can be enabled with one of the three functions, that is, dot1q, QinQ, and VLAN stacking.

For example, if hwQinQSubIfTermTable is created, hwQinQSubIfVlanStackingTable and the VLAN dot1q configuration cannot be created.

  • The setting of hwQinQSubIfVlanStackingCEVlan cannot overlap the setting of hwQinQSubIfTermPEVlan in hwQinQSubIfTermTable.

  • Similarly, the setting of hwQinQSubIfVlanStackingCEVlan cannot overlap the setting of VLAN ID in the VLAN Type field.

  • If only one inner tag of VLAN stacking is set, the values of hwQinQSubIfTStackingCEVlanStart and hwQinQSubIfStackingCEVlanEnd must be the same.

  • The VLAN IDs permitted by the VLAN stacking sub-interface must be different from the configuration on the QinQ termination sub-interface.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

None.

Access Restriction

None.

hwQinQStaticARPCfgTable

This table is used to create or delete the static ARP setting of a QinQ termination sub-interface or a dot1q termination sub-interface.

The indexes of this table are hwQinQStaticARPCfgIfIndex and hwQinQStaticARPCfgIp.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.116.2.6.1.1

hwQinQStaticARPCfgIfIndex

INTEGER

Not-accessible

This object indicates the index of the QinQ termination or dot1q termination sub-interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.6.1.2

hwQinQStaticARPCfgIp

OCTET STRING (SIZE (4))

Not-accessible

This object indicates the IP address of the static ARP entry.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.6.1.3

hwQinQStaticARPCfgMac

OCTET STRING (SIZE (6))

Read-create

This object indicates the MAC address of the static ARP entry.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.6.1.4

hwQinQStaticARPCfgVlan

INTEGER (1..4094)

Read-create

This object indicates the outer tag of the static ARP entry.

Currently, the value range of 1 to 4094 is supported.

1.3.6.1.4.1.2011.5.25.116.2.6.1.5

hwQinQStaticARPCfgCEVlan

INTEGER (1..4094)

Read-create

This object indicates the inner tag of the static ARP entry.

Currently, the value range of 0 to 4094 is supported.

The value 0 indicates the inner tag of the static ARP entry of a dot1q termination sub-interface.

1.3.6.1.4.1.2011.5.25.116.2.6.1.6

hwQinQStaticARPCfgRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status.

  • 1: active
  • 2: notInService
  • 3: notReady
  • 4: createAndGo
  • 5: createAndWait
  • 6: destroy

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

  • The sub-interface is configured with QinQ termination or dot1q termination.

  • The IP address is specified for the sub-interface. The configured IP address belongs to the same network segment with the IP address specified by the sub-interface.

  • The specified VID and CEVID are in the termination range of the sub-interface.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

None.

Access Restriction

None.

hwQinQStaticMACCfgTable

This table is used to create or delete the static MAC configuration.

The index of this table is hwQinQStaticMACCfgMac.hwQinQStaticMACCfgVsiName.hwQinQStaticMACCfgVlan.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.116.2.7.1.1

hwQinQStaticMACCfgMac

OCTET STRING (SIZE (6))

Not-accessible

This object indicates MAC addresses in the static MAC table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.7.1.2

hwQinQStaticMACCfgVlan

INTEGER (1..4094)

Not-accessible

This object indicates the ID of the VLAN to which the MAC address belongs.

Value 0 is reserved.

Currently, the value range of 1 to 4094 is supported.

1.3.6.1.4.1.2011.5.25.116.2.7.1.3

hwQinQStaticMACCfgVsiName

OCTET STRING (SIZE (0..31))

Not-accessible

This object indicates the VSI to which the MAC address belongs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.7.1.4

hwQinQStaticMACCfgPEVlan

INTEGER (1..4094)

Read-create

This object indicates the outer tag of the MAC entry.

Currently, the value range of 1 to 4094 is supported.

1.3.6.1.4.1.2011.5.25.116.2.7.1.5

hwQinQStaticMACCfgCEVlan

INTEGER (1..4094)

Read-create

This object indicates the inner tag of the MAC entry.

Currently, the value range of 0 to 4094 is supported.

The value 0 indicates the inner tag of the MAC entry of a dot1q termination sub-interface.

1.3.6.1.4.1.2011.5.25.116.2.7.1.6

hwQinQStaticMACCfgType

INTEGER

{

invalid(0),

dynamid(1),

static(2),

blackhole(3),

toobig(4)

}

Read-create

The value of this object identifies the type of the configured static MAC entry.

  • 0: invalid
  • 1: dynamic
  • 2: static
  • 3: blackhole
  • 4: toobig

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.7.1.7

hwQinQStaticMACCfgIfIndex

INTEGER

Read-create

This object indicates the interface name of the static MAC entry. The interface must be a termination sub-interface and be bounded with a VSI.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.7.1.8

hwQinQStaticMACCfgFlag

INTEGER

{

vlan(1),

vsi(2),

mapping(3),

qinqtermination(4),

dot1qtermination(5)

}

Read-create

The value of this object identifies the QinQ configuration flag of the static MAC address:

  • 1: based on vlan
  • 2: based on vsi
  • 3: based on mapping
  • 4: based on qinq termination
  • 5: based on dot1q termination

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.7.1.9

hwQinQStaticMACCfgRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status.

  • 1: active
  • 2: notInService
  • 3: notReady
  • 4: createAndGo
  • 5: createAndWait
  • 6: destroy

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

  • The MAC table that has the same double tags with the static MAC table on another sub-interface cannot be created.

  • For the MAC configuration based on QinQ, QinQ termination needs to be configured on the sub-interface and a VSI need to be bound. The specified PE VID and CE VID must be in the termination range. Then, the value of hwQinQStaticMACCfgVlan is 0.

  • For the MAC configuration based on VSI, QinQ stacking and the VLAN type must be set on the Layer 3 sub-interface, and hwQinQStaticMACCfgVlan does not need to be specified. The indexes are hwQinQStaticMACCfgMac and hwQinQStaticMACCfgVsiName.

  • Configurations based on VLANs and mapping need to be performed on Layer 2 interfaces. hwQinQStaticMACCfgVsiNam does not need to be specified. The indexes are hwQinQStaticMACCfgMac and hwQinQStaticMACCfgVlan.

  • For the MAC configuration based on dot1q, dot1q termination must be configured on the sub-interface and a VSI must be bound. The specified PE VID must be in the termination range. Then, the value of hwQinQStaticMACCfgVlan is 0.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

None.

Access Restriction

None.

hwQinQSubIfDot1qTermTable

This table is used to create or delete the dot1q termination configuration.

The index of this table is hwQinQSubIfDot1qTermIfIndex.hwQinQSubIfDot1qTermVidStart.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.116.2.8.1.1

hwQinQSubIfDot1qTermIfIndex

INTEGER

Not-accessible

This object indicates the index of the dot1q termination sub-interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.8.1.2

hwQinQSubIfDot1qTermVidStart

INTEGER (1..4094)

Not-accessible

This object indicates the start VID of the CE VLANs permitted by the dot1q termination sub-interface. The value ranges from 1 to 4094.

Currently, the value range of 1 to 4094 is supported.

1.3.6.1.4.1.2011.5.25.116.2.8.1.3

hwQinQSubIfDot1qTermVidEnd

INTEGER (1..4094)

Read-create

This object indicates the end VID of the CE VLANs permitted by the dot1q termination sub-interface.

Currently, the value range of 1 to 4094 is supported.

1.3.6.1.4.1.2011.5.25.116.2.8.1.5

hwQinQSubIfDot1qTermRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status.

  • 1: active
  • 2: notInService
  • 3: notReady
  • 4: createAndGo
  • 5: createAndWait
  • 6: destroy

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

  • The number of ranges of CE VLAN IDs for dot1q termination on a sub-interface cannot be greater than 16, and CE VLAN IDs cannot overlap.

For example, if the value of hwQinQSubIfDot1qTermVidStart is set to 500 and the value of hwQinQSubIfDot1qTermVidEnd is set to 600, the value of hwQinQSubIfDot1qTermVidStart cannot be set to 300 and the value of hwQinQSubIfDot1qTermVidEnd cannot be set to 600. This is because overlapping exists between 300 to 500.

  • A sub-interface can be enabled with one of the three functions, that is, dot1q, QinQ, and VLAN stacking.

For example, if hwQinQSubIfTermTable or hwQinQSubIfVlanStackingTable is created, hwQinQSubIfDot1qTermTable cannot be created.

  • The settings of hwQinQSubIfDot1qTermVidStart and hwQinQSubIfDot1qTermVidEnd cannot overlap the setting of hwQinQSubIfVlanStackingCE in hwQinQSubIfTermPEVlan or hwQinQSubIfVlanStackingTable.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

None.

Access Restriction

None.

hwQinQSubIfMapTable

This table is used to configure QinQ mapping on sub-interfaces.

The indexes of this table are hwQinQSubIfMapIfIndex, hwQinQSubIfPEVlan, and hwQinQSubIfCEVlanStart.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.116.2.20.1.1

hwQinQSubIfMapIfIndex

INTEGER

Not-accessible

This object indicates the index of the sub-interface that is configured with QinQ mapping.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.20.1.2

hwQinQSubIfPEVlan

Integer (0..4094)

Not-accessible

The value of this object identifies the VLAN ID in the outer tag before mapping.

Currently, the value range of 1 to 4094 is supported.

1.3.6.1.4.1.2011.5.25.116.2.20.1.3

hwQinQSubIfCEVlanStart

Integer (1..4094)

Not-accessible

The value of this object identifies the start VLAN ID in the inner tag before mapping.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.20.1.4

hwQinQSubIfCEVlanEnd

Integer (1..4094)

Read-create

The value of this object identifies the end VLAN ID in the inner tag before mapping.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.20.1.6

hwQinQSubIfPEEtherType

Unsigned32 ('600'h..'ffff'h)

Read-create

This object indicates the EthType in the outer tag after mapping.

By default, the value of the EthType in the outer tag after mapping is 0x8100.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.20.1.7

hwQinQSubIfCEVlanMap

Integer (1..4094)

Read-create

The value of this object identifies the mapping VLAN ID.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.20.1.8

hwQinQSubIfCEEtherType

Unsigned32 ('600'h..'ffff'h)

Read-create

This object indicates the EthType in the inner tag after mapping.

By default, the value of the EthType in the inner tag after mapping is 0x8100.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.20.1.13

hwQinQSubIfMapRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The interface corresponding to hwQinQSubIfMapIfIndex must be a sub-interface.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restriction.

Description of Alarm Objects

None.

Unsupported Objects

The device does not support the following objects. Do not use these objects to maintain the device.

Table 104-1 List of unsupported objects

OID

 Object

Table

1.3.6.1.4.1.2011.5.25.116.2.20.1.5

hwQinQSubIfPEVlanMap

hwQinQSubIfMapTable

1.3.6.1.4.1.2011.5.25.116.2.20.1.9

hwQinQSubIfMapGroupId

hwQinQSubIfMapTable
Translation
简体中文
Download
Updated: 2022-05-25

Document ID: EDOC1100126932

Views: 100377

Downloads: 104

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Digital Signature File

Digital Signature Authentication Mode
Share
Previous Next

Copyright © 2023 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :