HUAWEI-BRAS-SRVCFG-EAP-MIB
Functions Overview
HUAWEI-BRAS-SRVCFG-EAP-MIB describes global 802.1X configurations and 802.1X configurations on an interface.
Root directory:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).huawei(2011).huaweiMgmt(5).hwDatacomm(25).hwBRASMib(40).hwBRASSrvcfgEap(4)
The functions provided by this MIB only apply to the common NAC configuration mode.
Description of Single Objects
hwDot1xGlobal
OID |
Object Name |
Syntax |
Maximum Access |
Description |
Access |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.40.4.1.2 |
hwDot1xGlobal |
INTEGER{enabled(1),disabled(2)} |
read-write |
This object indicates whether 802.1X authentication is enabled globally.
|
This object is implemented as defined in the corresponding MIB files. |
hwDot1xAuthenMethod
OID |
Object Name |
Syntax |
Access |
Description |
INTEGER { enabled (1), disabled (2) } |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.40.4.1.3 |
hwDot1xAuthenMethod |
INTEGER { chap(1), pap(2), eap(3) } |
read-write |
This object identifies the authentication method of 802.1X
users.
|
current |
hwDot1xDhcpTrigger
OID |
Object Name |
Syntax |
Access |
Description |
INTEGER { enabled (1), disabled (2) } |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.40.4.1.4 |
hwDot1xDhcpTrigger |
INTEGER{enabled(1),disabled(2)} |
read-write |
This object identifies whether 802.1X authentication is
enabled when the switch receives a Dynamic Host Configuration Protocol
(DHCP) packet requesting an IP address from a user.
|
current |
hwDot1xHandshake
OID |
Object Name |
Syntax |
Access |
Description |
INTEGER { enabled (1), disabled (2) } |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.40.4.1.5 |
hwDot1xHandshake |
INTEGER{enabled(1),disabled(2)} |
read-write |
This object indicates whether the handshake function is
enabled for online users.
|
current |
hwDot1xQuietPeriod
OID |
Object Name |
Syntax |
Access |
Description |
INTEGER { enabled (1), disabled (2) } |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.40.4.1.6 |
hwDot1xQuietPeriod |
INTEGER{enabled(1),disabled(2)} |
read-write |
This object identifies whether the quiet timer is enabled.
|
current |
hwDot1xRetry
OID |
Object Name |
Syntax |
Access |
Description |
INTEGER { enabled (1), disabled (2) } |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.40.4.1.7 |
hwDot1xRetry |
Integer32 (1..10) |
read-write |
This object identifies the maximum number of times for sending an authentication request to an access user. The value ranges from 1 to 10. By default, the value is 2. |
current |
hwDot1xTimerHandshakePeriod
OID |
Object Name |
Syntax |
Access |
Description |
INTEGER { enabled (1), disabled (2) } |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.40.4.1.8 |
hwDot1xTimerHandshakePeriod |
Integer32 |
read-write |
This object identifies the interval for sending handshake request messages. The value ranges from 5 to 7200, in seconds. By default, the value is 120. |
current |
hwDot1xTimerQuietPeriod
OID |
Object Name |
Syntax |
Access |
Description |
INTEGER { enabled (1), disabled (2) } |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.40.4.1.9 |
hwDot1xTimerQuietPeriod |
Integer32 |
read-write |
The value of this object identifies the quiet period. The value is an integer that ranges from 1 to 3600, in seconds. The default value is 60 seconds. |
current |
hwDot1xTimerClientTimeout
OID |
Object Name |
Syntax |
Access |
Description |
INTEGER { enabled (1), disabled (2) } |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.40.4.1.11 |
hwDot1xTimerClientTimeout |
Integer32 (1..120) |
read-write |
This object identifies the timeout interval of the response from the authentication client. The value ranges from 1 to 120, in seconds. By default, the value is 5. |
current |
hwDot1xTimerTxPeriod
OID |
Object Name |
Syntax |
Access |
Description |
INTEGER { enabled (1), disabled (2) } |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.40.4.1.12 |
hwDot1xTimerTxPeriod |
Integer32 (1..120) |
read-write |
This object identifies the timeout interval for transmitting packets. The value ranges from 1 to 120, in seconds. By default, the value is 30. |
current |
hwDot1xReauthenPeriod
OID |
Object Name |
Syntax |
Access |
Description |
INTEGER { enabled (1), disabled (2) } |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.40.4.1.13 |
hwDot1xReauthenPeriod |
Integer32 (60..7200) |
read-write |
This object identifies the interval for 802.1X re-authentication. The value ranges from 60 to 7200, in seconds. By default, the value is 3600. |
current |
hwDot1xQuietFailTimes
OID |
Object Name |
Syntax |
Access |
Description |
INTEGER { enabled (1), disabled (2) } |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.40.4.1.15 |
hwDot1xQuietFailTimes |
Integer32 (1..10) |
read-write |
This object identifies the number of authentication failures before the 802.1X user enters the silent state. The value ranges from 1 to 10. By default, the value is 10. |
current |
Description of MIB Tables
hwDot1xPortConfigTable
This table describes information about interface-based 802.1X authentication.
The index of this table is hwDot1xPortIndex.
OID |
Object Name |
Syntax |
Access |
Description |
INTEGER { enabled (1), disabled (2) } |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.40.4.1.14.1.1 |
hwDot1xPortIndex |
Integer32 |
not-accessible |
This object indicates the interface index. The value ranges from 0 to 1280. |
current |
1.3.6.1.4.1.2011.5.25.40.4.1.14.1.2 |
hwDot1xPortSwitch |
EnabledStatus |
read-create NOTE:
The NAC unified mode only supports read. |
This object identifies whether 802.1X authentication is enabled on the specified interface.
By default, 802.1X authentication is disabled. |
current |
1.3.6.1.4.1.2011.5.25.40.4.1.14.1.3 |
hwDot1xPortGuestVlan |
VlanidOrNone |
read-create NOTE:
The NAC unified mode only supports read. |
This object indicates the ID of a guest VLAN. The value ranges from 0 to 4094. Values 1 to 4094 specify guest VLAN IDs, and the value 0 is used to disable the guest VLAN. |
current |
1.3.6.1.4.1.2011.5.25.40.4.1.14.1.4 |
hwDot1xPortMaxUser |
Integer32 |
read-create |
This object identifies the maximum number of access users on the specified interface. The value is an integer that varies depending on product models. NOTE:
The NAC unified mode does not support the node. |
current |
1.3.6.1.4.1.2011.5.25.40.4.1.14.1.5 |
hwDot1xPortControl |
INTEGER |
read-create NOTE:
The NAC unified mode only supports read. |
This object identifies the access control mode on the specified interface.
By default, the value is auto. NOTE:
The NAC unified mode does not support the node. |
current |
1.3.6.1.4.1.2011.5.25.40.4.1.14.1.6 |
hwDot1xPortMethod |
INTEGER |
read-create NOTE:
The NAC unified mode only supports read. |
This object identifies the access mode on the specified interface.
By default, macbased 802.1X authentication is used. |
current |
1.3.6.1.4.1.2011.5.25.40.4.1.14.1.7 |
hwDot1xPortReauthen |
EnabledStatus |
read-create NOTE:
The NAC unified mode only supports read. |
This object identifies whether 802.1X re-authentication is enabled on the specified interface or all the interfaces of a switch.
By default, 802.1X re-authentication is disabled. |
current |
1.3.6.1.4.1.2011.5.25.40.4.1.14.1.8 |
hwDot1xMacByPass |
EnabledStatus |
read-create NOTE:
The NAC unified mode only supports read. |
This object identifies whether MAC address bypass authentication is enabled on the specified interface.
By default, MAC address bypass authentication is disabled. NOTE:
When MAC address bypass authentication is enabled, 802.1X authentication must be enabled on the interface so that MAC address bypass authentication takes effect. When MAC address bypass authentication is disabled, you must disable 802.1X authentication on the interface. |
current |
1.3.6.1.4.1.2011.5.25.40.4.1.14.1.9 |
hwDot1xModemVersion |
DisplayString |
read-only |
This object indicates the version number of the modem. |
current |
1.3.6.1.4.1.2011.5.25.40.4.1.14.1.13 |
hwDot1xMacByPassMacAuthFirst |
EnabledStatus |
read-create NOTE:
The NAC unified mode only supports read. |
This object identifies whether MAC address authentication first during MAC address bypass authentication is enabled on the device.
By default, the device is disabled from performing MAC address authentication first during MAC address bypass authentication. |
current |
1.3.6.1.4.1.2011.5.25.40.4.1.14.1.15 |
hwDot1xTriggerDhcpbind |
EnabledStatus |
read-create |
This object identifies whether automatically generate the DHCP snooping binding table is enabled on the device after 802.1X authentication is successfully configured for static IP users or when the users are at the pre-authentication phase.
By default, the device is disabled from automatically generating the DHCP snooping binding table after 802.1X authentication is successfully configured for static IP users or when the users are at the pre-authentication phase. NOTE:
The device automatically generates the DHCP snooping binding table when the users are at the pre-authentication phase only in unified mode. |
current |
Creation Restriction
No entry can be created in this table.
Modification Restriction
The entries in this table can be modified.
Deletion Restriction
The entries in this table cannot be deleted.
Access Restriction
The entries in this table can be read without restriction.
Unsupported Objects
The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device.
Object ID |
Object Name |
Table |
|---|---|---|
1.3.6.1.4.1.2011.5.25.40.4.2 |
hwSrvcfgEapMibTraps |
Single object |
1.3.6.1.4.1.2011.5.25.40.4.3 |
hwSrvcfgEapConformance |
Single object |
1.3.6.1.4.1.2011.5.25.40.4.3.1 |
hwSrvcfgEapCompliances |
Single object |
1.3.6.1.4.1.2011.5.25.40.4.1.10 |
hwDot1xTimerServerTimeout |
Single object |
1.3.6.1.4.1.2011.5.25.40.4.3.2 |
hwDot1xSystemConfigGroups |
Single object |
1.3.6.1.4.1.2011.5.25.40.4.1.14.1.10 |
hwDot1xForceDomain |
hwDot1xPortConfigTable |
1.3.6.1.4.1.2011.5.25.40.4.1.14.1.11 |
hwDot1xAuthStatus |
hwDot1xPortConfigTable |