LLDP-MIB

1.0.8802.1.1.2.1.1.1

lldpMessageTxInterval

Integer32(5..32768)

Read-write

This object indicates the interval for sending LLDP PDUs.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.1.2

lldpMessageTxHoldMultiplier

Integer32(2..10)

Read-write

This object indicates the time hold multiplier for an LLDP PDU.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.1.3

lldpReinitDelay

Integer32

Integer32(1..10)

This object indicates the delay in the re-initialization of the LLDP module.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.1.4

lldpTxDelay

Integer32(1..8192)

Read-write

This object indicates the delay of transmitting the next LLDP PDU.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.1.5

lldpNotificationInterval

Integer32(5..3600)

Read-write

This object indicates the delay after which the device sends a neighbor status change trap to the NMS.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.2.1

lldpStatsRemTablesLastChangeTime

INTEGER

Read-only

This object indicates the time of last modification to the remote data.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.2.2

lldpStatsRemTablesInserts

INTEGER

Read-only

This object indicates the amount of data added on the remote end.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.2.3

lldpStatsRemTablesDeletes

INTEGER

Read-only

This object indicates the amount of data deleted from the remote end.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.2.4

lldpStatsRemTablesDrops

INTEGER

Read-only

This object indicates the number of frames discarded when the buffer is full.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.2.5

lldpStatsRemTablesAgeouts

INTEGER

Read-only

This object indicates the number of entries deleted when they are aged.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.3.1

lldpLocChassisIdSubtype

INTEGER {

chassisComponent(1),

interfaceAlias(2),

portComponent(3),

macAddress(4),

networkAddress(5),

interfaceName(6),

local(7)

}

Read-only

This object indicates the subtype of the local device ID.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.3.2

lldpLocChassisId

OCTET STRING (SIZE (1..255))

Read-only

This object indicates the ID of the local device.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.3.3

lldpLocSysName

OCTET STRING (SIZE (0..255))

Read-only

This object indicates the name of the local device.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.3.4

lldpLocSysDesc

OCTET STRING (SIZE (0..255))

Read-only

This object indicates the description of the local device.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.3.5

lldpLocSysCapSupported

BITS {

other(0),

repeater(1),

bridge(2),

wlanAccessPoint(3),

router(4),

telephone(5),

docsisCableDevice(6),

stationOnly(7)

}

Read-only

This object indicates which system capabilities are supported on the local device.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.3.6

lldpLocSysCapEnabled

BITS {

other(0),

repeater(1),

bridge(2),

wlanAccessPoint(3),

router(4),

telephone(5),

docsisCableDevice(6),

stationOnly(7)

}

Read-only

This object indicates the system capabilities enabled on the local device.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.1.6.1.1

lldpPortConfigPortNum

Integer32(1..4096)

Not-accessible

This object indicates the number of the local port.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.1.6.1.2

lldpPortConfigAdminStatus

INTEGER {

txOnly(1),

rxOnly(2),

txAndRx(3),

disabled(4)

}

Read-write

This object indicates whether the local port is enabled.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.2.6.1.1

lldpStatsTxPortNum

Integer32(1..4096)

Not-accessible

This object indicates the number of a port.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.2.6.1.2

lldpStatsTxPortFramesTotal

INTEGER

Read-only

This object indicates the total number of frames sent from the port.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.2.7.1.1

lldpStatsRxPortNum

Integer32(1..4096)

Not-accessible

This object indicates the number of a port.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.2.7.1.2

lldpStatsRxPortFramesDiscardedTotal

INTEGER

Read-only

This object indicates the number of frames discarded on the port.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.2.7.1.3

lldpStatsRxPortFramesErrors

INTEGER

Read-only

This object indicates the number of errored frames received by the port.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.2.7.1.4

lldpStatsRxPortFramesTotal

INTEGER

Read-only

This object indicates the total number of frames received by the port.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.2.7.1.5

lldpStatsRxPortTLVsDiscardedTotal

INTEGER

Read-only

This object indicates the number of TLVs discarded by the port.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.2.7.1.6

lldpStatsRxPortTLVsUnrecognizedTotal

INTEGER

Read-only

This object indicates the number of unidentified TLVs received by the port.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.2.7.1.7

lldpStatsRxPortAgeoutsTotal

INTEGER

Read-only

This object indicates the number of remote aging neighbors.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.3.7.1.1

lldpLocPortNum

Integer32(1..4096)

Not-accessible

This object indicates the number of a port.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.3.7.1.2

lldpLocPortIdSubtype

INTEGER {

interfaceAlias(1),

portComponent(2),

macAddress(3),

networkAddress(4),

interfaceName(5),

agentCircuitId(6),

local(7)

}

Read-only

This object indicates the subtype of the port ID.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.3.7.1.3

lldpLocPortId

OCTET STRING (SIZE (1..255))

Read-only

This object indicates the ID of a port.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.3.7.1.4

lldpLocPortDesc

OCTET STRING (SIZE (0..255))

Read-only

This object indicates the description of a port.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.3.8.1.1

lldpLocManAddrSubtype

INTEGER

Not-accessible

This object indicates the subtype of a management IP address.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.3.8.1.2

lldpLocManAddr

OCTET STRING (SIZE (1..31))

Not-accessible

This object indicates a management IP address.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.3.8.1.3

lldpLocManAddrLen

Integer32

Read-only

This object indicates the length of a management IP address.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.3.8.1.4

lldpLocManAddrIfSubtype

INTEGER {

unknown(1),

ifIndex(2),

systemPortNumber(3)

}

Read-only

This object indicates the numbering scheme for the interfaces with management IP addresses.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.3.8.1.5

lldpLocManAddrIfId

Integer32

Read-only

This object indicates the number of the interface related to a management IP address.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.3.8.1.6

lldpLocManAddrOID

OBJECT IDENTIFIER

Read-only

This object indicates the OID of a hardware entity or protocol related to a management IP address.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.4.1.1.1

lldpRemTimeMark

INTEGER

Not-accessible

This object indicates the time filter of an entry.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.4.1.1.2

lldpRemLocalPortNum

Integer32(1..4096)

Not-accessible

This object indicates the port number of a remote device.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.4.1.1.3

lldpRemIndex

Integer32

Not-accessible

This object indicates the index of a remote neighbor.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.4.1.1.4

lldpRemChassisIdSubtype

INTEGER {

chassisComponent(1),

interfaceAlias(2),

portComponent(3),

macAddress(4),

networkAddress(5),

interfaceName(6),

local(7)

}

Read-only

This object indicates the subtype of the remote device ID.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.4.1.1.5

lldpRemChassisId

OCTET STRING (SIZE (1..255))

Read-only

This object indicates the ID of a remote device.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.4.1.1.6

lldpRemPortIdSubtype

INTEGER {

interfaceAlias(1),

portComponent(2),

macAddress(3),

networkAddress(4),

interfaceName(5),

agentCircuitId(6),

local(7)

}

Read-only

This object indicates the subtype of the remote port ID.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.4.1.1.7

lldpRemPortId

OCTET STRING (SIZE (1..255))

Read-only

This object indicates the ID of a remote port.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.4.1.1.8

lldpRemPortDesc

OCTET STRING (SIZE (0..255))

Read-only

This object indicates the description of a remote port.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.4.1.1.9

lldpRemSysName

OCTET STRING (SIZE (0..255))

Read-only

This object indicates the name of a remote device.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.4.1.1.10

lldpRemSysDesc

OCTET STRING (SIZE (0..255))

Read-only

This object indicates the description of remote device.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.4.1.1.11

lldpRemSysCapSupported

BITS {

other(0),

repeater(1),

bridge(2),

wlanAccessPoint(3),

router(4),

telephone(5),

docsisCableDevice(6),

stationOnly(7)

}

Read-only

This object indicates which system capabilities are supported on a remote device.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.4.1.1.12

lldpRemSysCapEnabled

BITS {

other(0),

repeater(1),

bridge(2),

wlanAccessPoint(3),

router(4),

telephone(5),

docsisCableDevice(6),

stationOnly(7)

}

Read-only

This object indicates which system capabilities are enabled on a remote device.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.4.2.1.1

lldpRemManAddrSubtype

INTEGER

Not-accessible

This object indicates the subtype of a management IP address.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.4.2.1.2

lldpRemManAddr

OCTET STRING (SIZE (1..31))

Not-accessible

This object indicates a management IP address.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.4.2.1.3

lldpRemManAddrIfSubtype

INTEGER {

unknown(1),

ifIndex(2),

systemPortNumber(3)

}

Read-only

This object indicates the numbering scheme for the ports with management IP addresses.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.4.2.1.4

lldpRemManAddrIfId

Integer32

Read-only

This object indicates the serial number of the interface related to a management IP address.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.4.2.1.5

lldpRemManAddrOID

OBJECT IDENTIFIER

Read-only

This object indicates the OID of a hardware entity or protocol related to a management IP address.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.0.0.1

lldpRemTablesChange

lldpStatsRemTablesInserts

lldpStatsRemTablesDeletes

lldpStatsRemTablesDrops

lldpStatsRemTablesAgeouts

An alarm is generated when the remote data is changed.

This object is implemented as defined in the corresponding MIB files.