HUAWEI-VRRP-EXT-MIB
Functions Overview
This MIB is defined by Huawei. The MIB provides the GET and SET operations on the information about VRRP tracking BFD, tracked interface, Admin-VRRP, and binding.
The updated MIB is used to enable the VRRP SS function, set the VRRP SS timer, and enable the capability of learning the interval for sending VRRP Hello packets.
The OID of the root object is:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).huawei(2011).huaweiMgmt(5).hwDatacomm(25).hwVrrpExt(127)
Relationships Between Tables
Figure 134-1 shows the relationship between hwAdminVrrpCfgTable and hwAdminVrrpMemberTable. An Admin-VRRP can manage multiple member VRRPs; therefore, the member VRRPs can be mapped to the Admin-VRRP through hwAdminVrrpCfgVRID and hwAdminVrrpCfgIfIndex.
hwVrrpStatResetTable does not have any direct relationship with hwAdminVrrpCfgTable, or hwAdminVrrpMemberTable.
Description of Single Objects
hwVrrpExtFreeArpInterval
OID |
Object Name |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.127.1.1 |
hwVrrpExtFreeArpInterval |
Integer32 (0|30..1200) |
Read-write |
The value of the object
identifies the interval at which gratuitous ARP packets are sent.
|
This object is implemented as defined in the corresponding MIB files. |
hwVrrpExtVIPPingCtr
OID |
Object Name |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.127.1.2 |
hwVrrpExtVIPPingCtr |
INTEGER{enable(1),disable(2)} |
read-write |
The value of the object identifies whether the ping to the virtual IP address is enabled. If not, all the packets destined to the virtual address are discarded. The values are as follows:
By default, the value is enable(1). |
This object is implemented as defined in the corresponding MIB files. |
hwVrrpExtSsTimer
OID |
Object Name |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.127.1.3 |
hwVrrpExtSsTimer |
Integer32 (0..255) |
Read-write |
The value of the object identifies whether the VRRP smooth switching function is enabled. If VRRP smooth switching function is enabled, the VRRP smooth switching timer is configured. That is, the interval for sending VRRP Hello packets is set upon the master/backup switchover. The values are as follows:
If VRRPv3 is used, the maximum value is 40950 ms. If a configured value is greater than 40950 ms, the value of 40950 ms takes effect. |
This object is implemented as defined in the corresponding MIB files. |
hwVrrpExtLearnAdvIntervalFlag
OID |
Object Name |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.127.1.4 |
hwVrrpExtLearnAdvIntervalFlag |
INTEGER{enabled(1),disabled(2)} |
Read-write |
The value of this object identifies whether the capacity of learning the interval for sending VRRP Hello packets is enabled. The values are as follows:
|
This object is implemented as defined in the corresponding MIB files. |
hwVrrpExtStateChangeReasonString
OID |
Object Name |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.127.1.7 |
hwVrrpExtStateChangeReasonString |
OCTET STRING (SIZE (0..255)) |
accessible-for-notify |
Reasons of VRRP state transition. |
This object is implemented as defined in the corresponding MIB files. |
hwVrrpExtProtocolVersion
OID |
Object Name |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.127.1.5 |
hwVrrpExtProtocolVersion |
Integer32 (v2(2),v3(3)) |
Read-write |
Current protocol version for VRRP on the specified device. The default value is v2(2), and the other value for this element is v3(3). The values are 2 and 3. By default, the value is 2. |
This object is implemented as defined in the corresponding MIB files. |
hwVrrpExtSendV3AdverPktMode
OID |
Object Name |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.127.1.6 |
hwVrrpExtSendV3AdverPktMode |
Integer32 (send_v2_only(1),send_v3_only(2),send_v3v2_both(3)) |
Read-write |
This value specifies the mode of sending advertisement packet for VRRP v3. It has three configurable values:
By default, the value is 2. |
This object is implemented as defined in the corresponding MIB files. |
Description of MIB Tables
hwVrrpTrackInterTable
This table is used to describe the configuration of the attributes of the interface tracked by VRRP.
The indexes of this table are as follows:
hwVrrpTrackInterVRID
hwVrrpTrackInterStandByIfnet
hwVrrpTrackInterIfnet
OID |
Object Name |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.127.2.1.1.1 |
hwVrrpTrackInterVRID |
Integer32 (1..255) |
Not-accessible |
The object indicates the ID of the VRRP backup group. The value ranges from 1 to 255. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.1.1.2 |
hwVrrpTrackInterStandByIfnet |
INTEGER |
Not-accessible |
The object indicates the index of the interface of the backup group, which is used with the backup group ID to uniquely identify a backup group. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.1.1.3 |
hwVrrpTrackInterIfnet |
INTEGER |
Not-accessible |
The object indicates the index of the tracked interface. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.1.1.4 |
hwVrrpTrackInterPriReduce |
Integer32 (0..255) |
Read-create |
The value of this object identifies the decreasing value of the priority of the VRRP backup group when the monitored interface goes Down. The value is an integer that can be 0 or 1 to 255.
|
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.1.1.5 |
hwVrrpTrackInterOperRowStatus |
INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)} |
Read-create |
The object indicates the status of the row. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.1.1.6 |
hwVrrpTrackInterPriIncrease |
Integer32 (0..255) |
Read-create |
The value of this object identifies the increasing value of the priority of the VRRP backup group when the monitored interface goes Down. The value is an integer that can be 0 or 1 to 255.
|
This object is implemented as defined in the corresponding MIB files. |
Creation Restriction
hwVrrpTrackInterVRID must be a value that exists in vrrpOperVrId of VRRP-MIB.mib VrrpOperEntry.
The VRRP backup group cannot be an IP address owner or increase VRRP priorities of devices to perform a master/backup switchover when the non-preemption mode is used.
The number of rows in this table cannot be greater than 8.
Modification Restriction
The entries in this table can be modified.
Deletion Restriction
The entries in this table can be deleted.
Access Restriction
The entries in this table can be read without restriction.
hwVrrpTrackBfdTable
This table is used to describe the configuration of the attribute of VRRP tracking BFD.
The indexes of this table are as follows:
hwVrrpTrackInterVRID
hwVrrpTrackInterStandByIfnet
hwVrrpTrackBfdId
OID |
Object Name |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.127.2.2.1.1 |
hwVrrpTrackBfdId |
Integer32 (1..16383) |
Not-accessible |
The value of the object identifies the ID of the BFD link tracked by the VRRP backup group. The value ranges from 1 to 16383. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.2.1.2 |
hwVrrpTrackBfdPriReduce |
Integer32 (0..255) |
Read-create |
The value of this object identifies the decreasing value of the priority of the VRRP backup group when the monitored BFD session goes Down. The value is an integer that can be 0 or 1 to 255.
|
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.2.1.3 |
hwVrrpTrackBfdOperRowStatus |
INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)} |
Read-create |
The object indicates the status of the row. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.2.1.4 |
hwVrrpTrackBfdPriIncrease |
Integer32 (0..255) |
Read-create |
The value of this object identifies the increasing value of the priority of the VRRP backup group when the monitored BFD session goes Down. The value is an integer that can be 0 or 1 to 255.
|
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.2.1.5 |
hwVrrpTrackBfdType |
INTEGER{normal(3)} |
Read-create |
The value of the object identifies the type of the BFD link tracked by the backup group. The value is 3.
|
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.2.1.6 |
hwVrrpTrackBfdName |
OctetString(1..15) |
Read-only |
The object indicates the name of a BFD session tracked by the backup group. |
This object is implemented as defined in the corresponding MIB files. |
Creation Restriction
hwVrrpTrackInterVRID must be a value in vrrpOperVrId of VRRP-MIB.mib vrrpOperEntry.
The VRRP backup group cannot be an IP address owner or increase VRRP priorities of devices to perform a master/backup switchover when the non-preemption mode is used.
The number of rows in this table cannot be greater than 8.
Modification Restriction
If hwVrrpTrackBfdType is a peer or a link, hwVrrpTrackBfdPriReduce and hwVrrpTrackBfdPriIncrease cannot be modified and their values are 0; hwVrrpTrackBfdType cannot be modified after being created.
Deletion Restriction
The entries in this table can be deleted.
Access Restriction
The entries in this table can be read without restriction.
hwAdminVrrpCfgTable
This table is used to describe the configuration of the Admin-VRRP attributes.
The indexes of this table are as follows:
hwAdminVrrpCfgIfIndex
hwAdminVrrpCfgVRID
OID |
Object Name |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.127.2.3.1.1 |
hwAdminVrrpCfgIfIndex |
INTEGER |
Not-accessible |
The object indicates the index of the interface of the Admin-VRRP backup group. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.3.1.2 |
hwAdminVrrpCfgVRID |
Integer32 (1..255) |
Not-accessible |
The object indicates the ID of the Admin-VRRP backup group. The value ranges from 1 to 255. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.3.1.3 |
hwAdminVrrpCfgOperRowStatus |
INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)} |
Read-create |
The object indicates the status of the row. |
This object is implemented as defined in the corresponding MIB files. |
Creation Restriction
Only CreateAndGo can be created in this table. A row can be created only when hwAdminVrrpCfgOperRowStatus with both hwAdminVrrpCfgIfIndex and hwAdminVrrpCfgVRID specified is entered.
Modification Restriction
The entries in this table can be modified.
Deletion Restriction
The entries in this table can be deleted.
Access Restriction
The entries in this table can be read without restraint.
hwAdminVrrpMemberTable
This table is used to describe the configuration of the binding of Admin-VRRP and member VRRPs.
The indexes of this table are as follows:
hwAdminVrrpCfgIfIndex
hwAdminVrrpCfgVRID
hwAdminVrrpMemberIfIndex
hwAdminVrrpMemberVRID
OID |
Object Name |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.127.2.4.1.1 |
hwAdminVrrpMemberIfIndex |
INTEGER |
Not-accessible |
The object indicates the index of the interface of the management VRRP member. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.4.1.2 |
hwAdminVrrpMemberVRID |
Integer32 (1..255) |
Not-accessible |
The object indicates the ID of the management VRRP member. The value ranges from 1 to 255. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.4.1.3 |
hwAdminVrrpMemberDiscardPkts |
INTEGER (0..4294967295) |
Read-only |
The object indicates the number of packets discarded when the VRRP backup group joins the management VRRP backup group. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.4.1.4 |
hwAdminVrrpMemberOperRowStatus |
INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)} |
Read-create |
The object indicates the status of the row. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.4.1.5 |
hwAdminVrrpMemberFlowdownMode |
INTEGER{enabled(1),disabled(2)} |
Read-create |
The object indicates that the interface of the member VRRP works in flowdown mode. |
This object is implemented as defined in the corresponding MIB files. |
Creation Restriction
In this table, only CreateAndGo can be created. A row can be created only when hwAdminVrrpCfgVRID, hwAdminVrrpCfgIfIndex, hwAdminVrrpMemberVRID, hwAdminVrrpCfgOperRowStatus, and hwAdminVrrpMemberIfIndex are input.
If a management VRRP backup group has been bound to the interface where a service VRRP backup group resides or a service VRRP backup group has been associated with EFM/BFD, the service VRRP backup group cannot be bound to the management VRRP backup group.
Modification Restriction
The entries in this table can be modified.
Deletion Restriction
The entries in this table can be deleted.
Access Restriction
The entries in this table can be read without restraint.
hwVrrpStatResetTable
This table is used to describe information about the operation of resetting the statistics of VRRP packets.
The indexes of this table are as follows:
hwVrrpStatResetIfIndex
hwVrrpStatResetVRID
OID |
Object Name |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.127.2.5.1.1 |
hwVrrpStatResetIfIndex |
INTEGER |
Not-accessible |
The object indicates the index of the interface of the VRRP backup group. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.5.1.2 |
hwVrrpStatResetVRID |
Integer32 (1..255) |
Not-accessible |
The object indicates the ID of the VRRP backup group. The value ranges from 1 to 255. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.5.1.3 |
hwVrrpStatResetFlag |
INTEGER{enable(1),disable(2)} |
Read-write |
The object indicates whether the statistics of the VRRP packet is enabled. The values are as follows:
By default, the value is 2. |
This object is implemented as defined in the corresponding MIB files. |
Creation Restriction
No entry can be created in this table.
Modification Restriction
The entries in this table can be modified.
Deletion Restriction
The entries in this table cannot be deleted.
Access Restriction
The entries in this table can be read without restraint.
hwVrrpStatExtTable
This table is used to display VRRP statistics.
The indexes of this table are hwVrrpStatExtIfIndex and hwVrrpStatExtVRID.
OID |
Object Name |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.127.2.10.1.1 |
hwVrrpStatExtIfIndex |
INTEGER |
Not-accessible |
The object indicates the index of this table. It is the index of the interface configured with a VRRP backup group. |
This object is implemented as defined in the corresponding MIB file. |
1.3.6.1.4.1.2011.5.25.127.2.10.1.2 |
hwVrrpStatExtVRID |
Integer32 (1..255) |
Not-accessible |
This object indicates the index of this table. It is the VRID of a VRRP backup group. |
This object is implemented as defined in the corresponding MIB file. |
1.3.6.1.4.1.2011.5.25.127.2.10.1.3 |
hwVrrpStatExtBecomeBackup |
INTEGER (0..4294967295) |
Read-only |
The value of this object identifies the number of times the Master status changes to the Backup status in a VRRP backup group. |
This object is implemented as defined in the corresponding MIB file. |
1.3.6.1.4.1.2011.5.25.127.2.10.1.4 |
hwVrrpStatExtBecomeInit |
INTEGER (0..4294967295) |
Read-only |
The value of this object identifies the number of times the status changes to the Initialize status in a VRRP backup group. |
This object is implemented as defined in the corresponding MIB file. |
1.3.6.1.4.1.2011.5.25.127.2.10.1.5 |
hwVrrpStatExtCreateTime |
DisplayString (SIZE (1..40)) |
Read-only |
The value of this object identifies the time a VRRP backup group is created. The value is a string of 1 to 40 characters. |
This object is implemented as defined in the corresponding MIB file. |
1.3.6.1.4.1.2011.5.25.127.2.10.1.6 |
hwVrrpStatExtLastChangeTime |
DisplayString (SIZE (1..40)) |
Read-only |
The value of this object identifies the time of the last status change in a VRRP backup group. The value is a string of 1 to 40 characters. |
This object is implemented as defined in the corresponding MIB file. |
Creation Restriction
No entry can be created in this table.
Modification Restriction
The entries in this table cannot be modified.
Deletion Restriction
The entries in this table cannot be deleted.
Access Restriction
The entries in this table can be read without restriction.
hwVrrpTrackNQATable
This table is used to configure a VRRP backup group to track an NQA test instance.
The indexes of this table are as follows:
hwVrrpTrackNQAVRID
hwVrrpTrackNQAStandbyIfIndex
hwVrrpTrackNQAAdminName
hwVrrpTrackNQATestName
OID |
Object Name |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.127.2.12.1.1 |
hwVrrpTrackNQAVRID |
Integer32 (1..255) |
Not-accessible |
The object indicates the ID of the VRRP backup group. The value ranges from 1 to 255. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.12.1.2 |
hwVrrpTrackNQAStandbyIfIndex |
INTEGER |
Not-accessible |
This object indicates the index of an interface where the VRRP backup group resides. An interface index and a VRID together identify a VRRP backup group. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.12.1.3 |
hwVrrpTrackNQAAdminName |
DisplayString (SIZE (1..32)) |
Not-accessible |
The value of this object identifies the name of a management NQA test instance that a VRRP backup group tracks. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.12.1.4 |
hwVrrpTrackNQATestName |
DisplayString (SIZE (1..32)) |
Not-accessible |
The value of this object identifies the name of an NQA test instance that a VRRP backup group tracks. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.12.1.5 |
hwVrrpTrackNQAPriReduce |
Integer32 (0..255) |
Read-create |
The value of this object identifies a value by which the VRRP priority value decreases after the tracked NQA instance goes Down. The value is an integer that can be 0 or 1 to 255.
|
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.12.1.6 |
hwVrrpTrackNQAOperRowStatus |
INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)} |
Read-create |
The object indicates the status of the row. |
This object is implemented as defined in the corresponding MIB files. |
Creation Restriction
hwVrrpTrackNQAVRID must be an existing value of vrrpOperVrId in VrrpOperEntry of VRRP-MIB.
The VRRP backup group cannot be an IP address owner or increase VRRP priority values of devices to perform a master/backup switchover when the non-preemption mode is used.
The NQA test instance must be an ICMP test instance.
Modification Restriction
The entries in this table can be modified.
Deletion Restriction
The entries in this table can be deleted.
Access Restriction
The entries in this table can be read without restriction.
hwVrrpTrackRouteTable
This table is used to configure a VRRP backup group to track a route.
The indexes of this table are as follows:
hwVrrpTrackRouteIndex
hwVrrpTrackRouteVRID
hwVrrpTrackRoutePrefix
hwVrrpTrackRouteMask
hwVrrpTrackRouteVrf
OID |
Object Name |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.127.2.13.1.1 |
hwVrrpTrackRouteVRID |
Integer32 (1..255) |
Not-accessible |
The object indicates the ID of the VRRP backup group. The value ranges from 1 to 255. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.13.1.2 |
hwVrrpTrackRouteIndex |
INTEGER |
Not-accessible |
This object indicates the index of an interface where the VRRP backup group resides. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.13.1.3 |
hwVrrpTrackRoutePrefix |
OCTET STRING (SIZE (4)) |
Not-accessible |
This object indicates the IP address in a route that a VRRP backup group tracks. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.13.1.4 |
hwVrrpTrackRouteMask |
OCTET STRING (SIZE (4)) |
Not-accessible |
This object indicates the IP address mask in a route that a VRRP backup group tracks. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.13.1.5 |
hwVrrpTrackRouteVrf |
DisplayString (SIZE (0..31)) |
Not-accessible |
This object indicates the ID of a VPN instance. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.13.1.6 |
hwVrrpTrackRoutePriReduce |
Integer32 (0..255) |
Read-create |
The value of this object identifies a value by which the VRRP priority value decreases after the tracked route is unreachable. The value is an integer that can be 0 or 1 to 255.
|
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.127.2.13.1.7 |
hwVrrpTrackRouteOperRowStatus |
INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)} |
Read-create |
The object indicates the status of the row. |
This object is implemented as defined in the corresponding MIB files. |
Creation Restriction
hwVrrpTrackRouteVRID must be an existing value of vrrpOperVrId in VrrpOperEntry of VRRP-MIB.
The VRRP backup group cannot be an IP address owner or increase VRRP priority values of devices to perform a master/backup switchover when the non-preemption mode is used.
The number of rows in this table cannot be greater than 8.
Modification Restriction
The entries in this table can be modified.
Deletion Restriction
The entries in this table can be deleted.
Access Restriction
The entries in this table can be read without restriction.
Description of Alarm Objects
hwVrrpExtTrapMasterDown
OID |
Object Name |
Bound Variable |
Description |
Implemented Specifications |
|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.127.2.30.1 |
hwVrrpExtTrapMasterDown |
vrrpOperMasterIpAddr sysName ifName vrrpOperState hwVrrpExtStateChangeReasonString |
The VRRP status is changed from Master to other status, such as notactive (0), initialize (1), or backup (2). |
This object is implemented as defined in the corresponding MIB files. |
hwVrrpExtTrapNonMaster
OID |
Object Name |
Bound Variable |
Description |
Implemented Specifications |
|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.127.2.30.2 |
hwVrrpExtTrapNonMaster |
vrrpOperMasterIpAddr sysName ifName vrrpOperState hwVrrpExtStateChangeReasonString |
This object indicates the status of a VRRP backup group changes from Backup to Initialize or from Initialize to Backup. |
This object is implemented as defined in the corresponding MIB file. |