No relevant resource is found in the selected language.
Enterprise
Worldwide
Search
Support Documentation
S12700 and S12700E V200R019C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
HUAWEI-BRAS-RADIUS-MIB

HUAWEI-BRAS-RADIUS-MIB

Functions Overview

HUAWEI-BRAS-RADIUS-MIB is used to configure RADIUS functions on devices.

Root object:

iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).huawei(2011).huaweiMgmt(5).hwDatacomm(25).hwBRASMib(40).hwBRASRadius(15)

Relationships Between Tables

Figure 19-1 Relationships between control tables

The RADIUS server information is specified in a RADIUS server template; therefore, hwRadiusServerTable can be mapped to hwRadiusGroupTable.

Description of Single Objects

None.

Description of MIB Tables

hwRadiusAuthorServerTable

hwRadiusAuthorServerTable configures the RADIUS disconnect manager (DM) and dynamic authorization server.

The indexes of this table are hwRadiusAuthorServerIP and hwRadiusAuthorServerVrf.

OID

Object Name

Syntax

Maximum Access

Description

Access

1.3.6.1.4.1.2011.5.25.40.15.1.4.1.1

hwRadiusAuthorServerIP

OCTET STRING (SIZE (4))

read-only

This object indicates the IP address of the RADIUS authorization server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.4.1.2

hwRadiusAuthorServerVrf

Octet String (1-31)

read-only

This object indicates the VPN instance of the RADIUS authorization server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.4.1.3

hwRadiusAuthorServerKey

Octet String (1-16)

read-write

This object indicates the shared key of the RADIUS authorization server.

NOTE:

This object cannot be used to configure or obtain a shared key in cipher text. However, after the password is changed using MIB, the password is displayed in cipher text.

The Get operation returns the value ****** after the RADIUS authorization server shared key is configured.

1.3.6.1.4.1.2011.5.25.40.15.1.4.1.4

hwRadiusAuthorServerGroupName

Octet String (1-32)

read-write

This object indicates the RADIUS template name matching the RADIUS authorization server.

The value is a string of 1 to 32 characters. The RADIUS template must already exist.

1.3.6.1.4.1.2011.5.25.40.15.1.4.1.5

hwRadiusAuthorServerRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status of the RADIUS authorization server.

The row status can be created or deleted.
1.3.6.1.4.1.2011.5.25.40.15.1.4.1.7 hwRadiusAuthorServerProtectFlag TruthValue read-create This object indicates whether the security hardening function is enabled. The value can be:
  • 1: Enable the security hardening function.
  • 2: Disable the security hardening function.

The default value is 2.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The entries in this table can be created.

Modification Restriction

The entries in this table can be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwRadiusGroupTable

hwRadiusGroupTable configures the parameters of the RADIUS server groups.

The index of this table is hwRadiusGroupName.

OID

Object Name

Syntax

Maximum Access

Description

Implemented Specification

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.1

hwRadiusGroupName

Octet String

read-only

This object indicates the RADIUS template name.

The value is a string of 1 to 32 characters.

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.2

hwRadiusServerKey

Octet String

read-write

This object indicates the shared key of RADIUS servers.

NOTE:

This object cannot be used to configure or obtain a shared key in cipher text. However, after the password is changed using MIB, the password is displayed in cipher text.

The Get operation returns a fixed value of ******after the RADIUS shared key is configured.

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.4

hwRadiusServerRetransmit

Integer32

read-write

This object indicates the number of times RADIUS packets are retransmitted.

The value ranges from 1 to 5. The default value is 3.

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.5

hwRadiusServerTimeout

Integer32

read-write

This object indicates the response timeout interval of the RADIUS server.

The value ranges from 3 to 10, in seconds. The default value is 5.

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.6

hwRadiusServerAttrTran

INTEGER{true(1),false(2)}

read-write

This object indicates whether the RADIUS attribute translation function is enabled.

The options are as follows:

  • 1: The RADIUS attribute translation function is enabled.
  • 2: The RADIUS attribute translation function is disabled (default value).

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.7

hwRadiusPacketUnit

INTEGER (0..4294967295)

read-write

This object indicates the traffic unit in the RADIUS server template.

The options are as follows:

  • 1: byte (default value)
  • 2: kbyte
  • 3: mbyte
  • 4: gbyte

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.8

hwRadiusDomainInclude

INTEGER

read-write

This object indicates whether the domain name is encapsulated in the user name.

  • 1: includingDomain(1). The user name contains a domain name.
  • 2: notIncludingDomain(2). The user name does not contain a domain name.
  • 3: original(3). The device does not modify the user name entered by the user (default).

The default value is 3.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.10

hwRadiusAlgorithm

Integer32

read-write
This object indicates packet sending algorithm of the RADIUS server.
  • 1: masterbackup(1). specifies the algorithm for selecting RADIUS servers as packet-based primary/secondary.
  • 2: shareloading(2). specifies the algorithm for selecting RADIUS servers as packet-based load balancing.
  • 3: shareloadingbyuser(3). specifies the algorithm for selecting RADIUS servers as single user-based load balancing.
  • 4: masterbackupbyuser(4). specifies the algorithm for selecting RADIUS servers as single user-based primary/secondary.

The default value is 1.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.11

hwRadiusServerNasPortFmt

OCTET STRING

read-write

This object indicates the NAS port format of the RADIUS server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.12

hwRadiusGroupRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.14

hwRadiusServerNasIpAddress

IP Address

read-write

This object indicates the NAS-IP-Address attribute.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.20

hwRadiusServerAcctStopPacket

Integer32

read-write

This object indicates the number of accounting stop packets that can be retransmitted.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.21

hwRadiusMasterServerDeadTime

Integer32

read-write

This object indicates the interval for the primary RADIUS server to return to the active state.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.22

hwRadiusServerDetectServer

Integer32

read-write

This object indicates the interval for detecting the RADIUS server status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.23

hwRadiusServerNasPortIdFmt

INTEGER

read-write

This object indicates the ID format of the NAS port.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.24

hwRadiusServerTestuserName

OCTET STRING

read-write

This object indicates the user name for automatic detection.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.25

hwRadiusServerTestuserPassword

OCTET STRING

read-write

This object indicates the password for automatic detection.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.26

hwRadiusServerNasIpv6Address

OCTET STRING (SIZE (16))

read-write

This object indicates the value of the NAS-IPv6-Address attribute in RADIUS packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.28

hwRadiusCalledIDFormatType

INTEGER

read-write
This object indicates the encapsulation content of the called-station-id attribute in RADIUS packets. The value can be:
  • 1: apmac(1). MAC address of the AP.
  • 2: acmac(2). MAC address of the AC.
  • 3: apname(3). Name of the AP.
  • 4: apgroupname(4). Name of the AP group to which the AP belongs.
  • 5: aplocation(5). Location information of the AP.
  • 6: acip(6). IP address of the AC.
  • 7: vlanid(7). Outer VLAN through which the user goes online.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.29

hwRadiusCalledIDIncSSID

INTEGER{true(1),false(2)}

read-write

This object indicates whether the SSID is encapsulated into the called-station-id attribute in RADIUS packets.

The default value is false, indicating that the SSID is not encapsulated into the called-station-id attribute when this object is not configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.30

hwRadiusCalledIDSSIDSep

OCTET STRING (SIZE (1..1))

read-write

This object indicates the delimiter before the SSID when the SSID is encapsulated into the called-station-id attribute in RADIUS packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.31

hwRadiusServerNasIpAPInfo

INTEGER

read-write
This object indicates whether the NAS-IP-Address attribute value in RADIUS packets is the AP's IP address. The value can be:
  • 1: true(1). The NAS-IP-Address attribute value in RADIUS packets is the AP's IP address.
  • 2: false(2). The NAS-IP-Address attribute value in RADIUS packets is not the AP's IP address

The default value is 2.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.32

hwRadiusNasIdentifyFormat

INTEGER

read-write
This object indicates the NAS-Identifier attribute encapsulation format in RADIUS packets. The value can be:
  • 1: hostname(1). The encapsulation format is the device's hostname.
  • 2: vlanid(2). The encapsulation format is the user's VLAN ID.
  • 3: apinfo(3). The encapsulation format is the AP's MAC address.

The default value is 1.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.33

hwRadiusSupportCUI

INTEGER

read-write

This object indicates whether the device supports the RADIUS Chargeable-User-Identity (CUI) attribute.

  • 1: Yes
  • 2: No

The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.34

hwRadiusConfigNotReject

INTEGER

read-write

This object indicates whether the device processes the RADIUS CUI attribute.

  • 1: No
  • 2: Yes

The default value is 1.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

None

Modification Restriction

None

Deletion Restriction

Before deleting a RADIUS template, ensure that the RADIUS template is not referenced by any domain and the server in the RADIUS template is not performing authentication or accounting.

Access Restriction

None

hwRadiusServerTable

hwRadiusServerTable collects statistics on the addresses of RADIUS servers and related information.

The indexes of this table are hwRadiusGroupName, hwRadiusServerIndex, and hwRadiusServerType.

OID

Object Name

Syntax

Maximum Access

Description

Implemented Specification

1.3.6.1.4.1.2011.5.25.40.15.1.2.1.1

hwRadiusServerIndex

Integer32

read-only

This object indicates whether the RADIUS server is the primary or secondary RADIUS server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.2.1.2

hwRadiusServerType

INTEGER

read-only
This object indicates the RADIUS server type. The values and meanings are as follows:
  • 1: authentication server
  • 2: accounting server

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.2.1.3

hwRadiusServerVRF

Octet String

read-write

This object indicates the name of a VPN instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.2.1.4

hwRadiusServerIP

IP Address

read-write

This object indicates the IP address of the RADIUS server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.2.1.5

hwRadiusServerPort

Integer32

read-write

This object indicates the RADIUS server port number. The value ranges from 1 to 65535.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.2.1.6

hwRadiusServerWeight

Integer32

read-write

This object indicates the load balancing weight of the authentication and accounting server. This object is optional.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.2.1.8

hwRadiusServerRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.2.1.17

hwRadiusServerIPv6Address

OCTET STRING (SIZE (16))

read-write

This object indicates the IPv6 address of the RADIUS server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.2.1.18

hwRadiusServerSourceIPAddressEachServer

OCTET STRING (SIZE (4))

read-write

This object indicates the source IP address of a RADIUS server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.2.1.19

hwRadiusServerSourceIPv6AddressEachServer

OCTET STRING (SIZE (16))

read-write

This object indicates the source IPv6 address of a RADIUS server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.2.1.20

hwRadiusServerSourceLoopBackEachServer

Unsigned32

read-write

This object indicates that the IP address of a loopback interface is used as the source IP address of the RADIUS server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.2.1.21

hwRadiusServerSourceVlanifEachServer

INTEGER (0..4294967295)

read-write

This object indicates that the IP address of a VLANIF interface is used as the source IP address of the RADIUS server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.40.15.1.2.1.22

hwRadiusServerStatus

INTEGER

read-only

This object indicates the RADIUS server status. The value can be:

  • 1: The RADIUS server is in Up status.
  • 2: The RADIUS server is in Down status.
  • 3: The RADIUS server is in detection status.
  • 4: The RADIUS server is in forcible Up status.
  • 5: The RADIUS server status is unknown.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The primary and secondary authentication servers must be configured with different IP addresses.

The primary and secondary accounting servers must be configured with different IP addresses.

Modification Restriction

The primary and secondary authentication servers must be configured with different IP addresses.

The primary and secondary accounting servers must be configured with different IP addresses.

Deletion Restriction

None

Access Restriction

None

hwRadiusAttrCheckTable

hwRadiusAttrCheckTable is a table used to check RADIUS attributes.

The index of this table is hwRadiusAttrCheckIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.40.15.1.13.1.1

hwRadiusAttrCheckIndex

Integer32

read-only

This object indicates the index of RADIUS attribute to be checked.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.40.15.1.13.1.2

hwRadiusAttrCheckName

OCTET STRING

read-write

This object indicates the name of RADIUS attribute to be checked.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.40.15.1.13.1.3

hwRadiusAttrCheckRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table.

Modification Restriction

The entries in this table can be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwRadiusAttrDisableTable

hwRadiusAttrDisableTable is a table of disabled RADIUS attributes.

The index of this table is hwRadiusAttrDisableIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.40.15.1.14.1.1

hwRadiusAttrDisableIndex

Integer32

read-only

This object indicates the index of RADIUS attribute to be disabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.40.15.1.14.1.2

hwRadiusAttrDisableName

OCTET STRING

read-write

This object indicates the name of RADIUS attribute to be disabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.40.15.1.14.1.3

hwRadiusAttrDisableDirection

INTEGER

read-create
This object indicates the direction in which RADIUS attributes are disabled.
  • 1: send(1). The device disables attributes in sent RADIUS packets.
  • 2: receive(2). The device disables attributes in received RADIUS packets.
  • 2: sendreceive(3). The device disables attributes in sent and received RADIUS packets.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.40.15.1.14.1.4

hwRadiusAttrDisableRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table.

Modification Restriction

The entries in this table can be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwRadiusAttrTranslateTable

hwRadiusAttrTranslateTable is a RADIUS attribute translation table.

The index of this table is hwRadiusAttrTranslateIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.40.15.1.15.1.1

hwRadiusAttrTranslateIndex

Integer32

read-only

This object indicates the index of RADIUS attribute to be translated.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.40.15.1.15.1.2

hwRadiusAttrTranslateSrcDescription

OCTET STRING

read-create

This object indicates the name of the source attribute to be translated.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.40.15.1.15.1.3

hwRadiusAttrTranslateDestDescription

OCTET STRING

read-create

This object indicates the name of the translated destination attribute.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.40.15.1.15.1.4

hwRadiusAttrTranslateDirection

INTEGER

read-create
This object indicates the direction in which RADIUS attributes are translated.
  • 0: invalid(0). No translation direction is configured.
  • 1: send(1). The device translates attributes in sent RADIUS packets.
  • 2: receive(2). The device translates attributes in received RADIUS packets.
  • 3: sendreceive(3). The device translates attributes in sent and received RADIUS packets.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.40.15.1.15.1.5

hwRadiusAttrTranslatePacketType

INTEGER

read-create
This object indicates the type of packets whose RADIUS attributes need to be translated.
  • 0: invalid
  • 1: authentication request packet
  • 2: authentication accept packet
  • 3: authentication request and authentication accept packets
  • 4: accounting request packet
  • 5: authentication request and accounting request packets
  • 6: authentication accept and accounting request packets
  • 7: authentication request, authentication accept, and accounting request packets
  • 8: accounting response packet
  • 9: authentication request and accounting response packets
  • 10: authentication accept and accounting response packets
  • 11: authentication request, authentication accept, and accounting response packets
  • 12: accounting request and accounting response packets
  • 13: authentication request, accounting request, and accounting response packets
  • 14: authentication accept, accounting request, and accounting response packets
  • 15: authentication request, authentication accept, accounting request, and accounting response packets

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.40.15.1.15.1.6

hwRadiusAttrTranslateSrcVendorId

INTEGER (0..4294967295)

read-only

This object indicates the vendor ID of the source attribute to be translated.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.40.15.1.15.1.7

hwRadiusAttrTranslateSrcSubAttrId

Integer32

read-only

This object indicates the ID of the source attribute's sub-attribute.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.40.15.1.15.1.8

hwRadiusAttrTranslateDstVendorId

INTEGER (0..4294967295)

read-only

This object indicates the vendor ID of the translated destination attribute.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.40.15.1.15.1.9

hwRadiusAttrTranslateDstSubAttrId

Integer32

read-only

This object indicates the ID of the destination attribute's sub-attribute.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.40.15.1.15.1.10

hwRadiusAttrTranslateRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table.

Modification Restriction

The entries in this table can be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwRadiusAttrSetTable

hwRadiusAttrSetTable is a table that lists the changes of RADIUS attribute values.

The index of this table is hwRadiusAttrSetIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.40.15.1.16.1.1

hwRadiusAttrSetIndex

Integer32

read-only

This object indicates the index of RADIUS attribute whose value needs to be changed.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.40.15.1.16.1.2

hwRadiusAttrSetName

OCTET STRING

read-write

This object indicates the name of RADIUS attribute whose value needs to be changed.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.40.15.1.16.1.3

hwRadiusAttrSetValue

OCTET STRING

read-create

This object indicates the value of RADIUS attribute after the change.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.40.15.1.16.1.4

hwRadiusSetRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table.

Modification Restriction

The entries in this table can be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwRadiusAccountTest

hwRadiusAccountTest is used to obtain the test-aaa command execution result.

The index of this table is hwRadiusAccountTestResult.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.40.15.1.17.1.1

hwRadiusAccountTestResult

INTEGER

read-only
The test-aaa command execution results are as follows:
  • 1: busy(0), be in authentication
  • 2: fail(1), authentication failed
  • 3: success(2), authentication is successful
  • 4: wrongnameorpassword(3), incorrect user name or password
  • 5: timeout(4), authentication timeout
  • 6: servernotexist(5), server inexistent
  • 7: invalid(6), invalid

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

None.

Description of Alarm Objects

hwRadiusAuthServerUp

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.40.15.2.2.1.1

hwRadiusAuthServerUp
  • hwStateChangeServerIp
  • hwStateChangeServerVrf
  • hwStateChangeServerPort

The authentication server is Up.

This object is implemented as defined in the corresponding MIB files.

hwRadiusAuthServerDown

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.40.15.2.2.1.2

hwRadiusAuthServerDown
  • hwStateChangeServerIp
  • hwStateChangeServerVrf
  • hwStateChangeServerPort

The authentication server is Down.

This object is implemented as defined in the corresponding MIB files.

hwRadiusAcctServerUp

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.40.15.2.2.1.3

hwRadiusAcctServerUp
  • hwStateChangeServerIp
  • hwStateChangeServerVrf
  • hwStateChangeServerPort

The accounting server is Up.

This object is implemented as defined in the corresponding MIB files.

hwRadiusAcctServerDown

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.40.15.2.2.1.4

hwRadiusAcctServerDown
  • hwStateChangeServerIp
  • hwStateChangeServerVrf
  • hwStateChangeServerPort

The accounting server is Down.

This object is implemented as defined in the corresponding MIB files.

hwRadiusAuthServerForceUp

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.40.15.2.2.1.5

hwRadiusAuthServerForceUp
  • hwStateChangeServerIp
  • hwStateChangeServerVrf
  • hwStateChangeServerPort

The authentication server is force up.

This object is implemented as defined in the corresponding MIB files.

hwRadiusAccServerForceUp

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.40.15.2.2.1.6

hwRadiusAccServerForceUp
  • hwStateChangeServerIp
  • hwStateChangeServerVrf
  • hwStateChangeServerPort

The accounting server is force up.

This object is implemented as defined in the corresponding MIB files.

Unsupported Objects

The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device.

Table 19-1 List of unsupported objects

Object ID

 Object Name

Table

1.3.6.1.4.1.2011.5.25.40.15.1

hwRadiusGroupObject

Single object

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.3

hwRadiusServerProtType

hwRadiusGroupTable

1.3.6.1.4.1.2011.5.25.40.15.1.1.1.9

hwRadiusClassASCar

hwRadiusGroupTable

1.3.6.1.4.1.2011.5.25.40.15.1.2.1.7

hwRadiusServerSecretKey

hwRadiusServerTable

1.3.6.1.4.1.2011.5.25.40.15.1.2.1.23

hwRadiusSourceVlanifVirtualIp

hwRadiusServerTable

1.3.6.1.4.1.2011.5.25.40.15.2

hwRadiusMIBTrap

Single object

1.3.6.1.4.1.2011.5.25.40.15.2.1

hwRadiusTrapObject

Single object

1.3.6.1.4.1.2011.5.25.40.15.2.2

hwRadiusTrapsDefine

Single object

1.3.6.1.4.1.2011.5.25.40.15.2.2.1

hwRadiusServerTraps

Single object

1.3.6.1.4.1.2011.5.25.40.15.3

hwRadiusConformance

Single object

1.3.6.1.4.1.2011.5.25.40.15.3.1

hwRadiusCompliances

Single object

1.3.6.1.4.1.2011.5.25.40.15.3.2

hwRadiusGroups

Single object

1.3.6.1.4.1.2011.5.25.40.15.2.1.1

hwStateChangeServerIp

hwRadiusMIBTrap

1.3.6.1.4.1.2011.5.25.40.15.2.1.2

hwStateChangeServerVrf

hwRadiusMIBTrap
Translation
简体中文
Download
Updated: 2022-05-25

Document ID: EDOC1100126932

Views: 107234

Downloads: 113

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Digital Signature File

Digital Signature Authentication Mode
Share
Previous Next

Copyright © 2023 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :