HUAWEI-L2VLAN-MIB

1.3.6.1.4.1.2011.5.25.42.3.1.5.1

hwVcmpDeviceMac

OCTET STRING{(6,6)}

read-write

MAC address of a device running VCMP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.3.1.2.38

hwL2VlanVoiceVlan8021p

Integer(0..7)

Read-write

This object indicates the 802.1p priority of the Voice VLAN.

The default value is 6.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.39

hwL2VlanVoiceVlanDscp

Integer(0..63)

Read-write

This object indicates DSCP priority of the Voice VLAN.

The default value is 46.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.1

hwL2VlanIndex

INTEGER (1..4094)

Not-accessible

The value of this object identifies the VLAN index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.2

hwL2VlanDescr

OCTET STRING(SIZE(0 to 80))

Read-create

This object indicates the description information of the VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.3

hwL2VlanPortList

OCTET STRING

Read-create

This object indicates the list of ports added to the VLAN.

A switch interface joins VLANs 1 to 4094 by default.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.4

hwL2VlanType

INTEGER

{

super vlan(1),

common-vlan(2),

sub-vlan(3),

muxVlan(4),

muxSubVlan(5),

protocolTransVlan(6)

}

Read-create

The value of this object identifies the type of the VLAN.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.6

hwL2VlanIfIndex

Integer32

Read-only

This object indicates whether the VLAN is configured with VLANIF. If VLANIF is configured, the value of this object is the index of VLANIF. Otherwise, the value is -1.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.7

hwL2VlanMacLearn

INTEGER{enabled(1),disabled(2)}

Read-create

The value of this object identifies whether the function of learning the MAC address is enabled. Super VLANs do not have this attribute.

The default value is enabled(1).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.11

hwL2VlanCreateStatus

INTEGER

{

other(1),

static(2),

dynamic(3)

}

Read-only

The value of this object identifies the creation mode of the VLAN:

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.12

hwL2VlanRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

The value of this object identifies the statuses of rows recorded by the VLAN:

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.15

hwL2VlanProperty

INTEGER

{

default(1),

backboneVlan(2),

mutilcastVlan(3),

userVlan(4)

}

Read-only

The Property of Vlan: backboneVlan(2) used by PBT application, mutilcastVlan(3) used by Multicast Vlan, userVlan(4) used by the users VLAN, and Default(1) means no special apply.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.17

hwL2VlanName

OCTET STRING(SIZE(0..31))

Read-create

The value of this object indicates the name of VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.18

hwL2VlanSmartMacLearn

INTEGER{enabled(1),disabled(2)}

Read-create

After the flexible MAC address learning in a VLAN is enabled, if fewer than three interfaces in the VLAN are Up, the system automatically disables MAC address learning in the VLAN, avoiding unnecessary resource consumption due to MAC address learning.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.20

hwL2VlanManagementVlan

INTEGER{enabled(1),disabled(2)}

Read-create

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.21

hwL2VlanDynamicVlan

INTEGER{enabled(1),disabled(2)}

read-only

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.1

hwL2VlanStackingPortIndex

Integer(1 to 65535)

Not-accessible

The value of this object identifies the index of the VLAN stacking port.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.2

hwL2VlanStackingInsideVlanId

INTEGER (1..4094)

Not-accessible

The value of this object identifies the VLAN ID. It identifies the inner tag for encapsulating the incoming packet from the VLAN stacking port.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.3

hwL2VlanStackingOutsideVlanListLow

OCTET STRING(SIZE(256))

Read-create

This object is the low 2048 bits in the VLAN list. It identifies the outer tag of the incoming packet. Each bit corresponds to one VLAN ID.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.4

hwL2VlanStackingOutsideVlanListHigh

OCTET STRING(SIZE(256))

Read-create

This object is the high 2048 bits in the VLAN list. It identifies the outer tag of the incoming packet. Each bit corresponds to one VLAN ID.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.5

hwL2VlanStackingRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

The value of this object identifies the statuses of rows in the hwL2VlanStackingTable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.1

hwL2VlanMappingPortIndex

Integer(1 to 65535)

Not-accessible

The value of this object identifies the index of the VLAN mapping port.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.2

hwL2VlanMappingInsideVlanId

INTEGER (1..4094)

Not-accessible

The value of this object identifies the VLAN ID. It describes the VLAN ID after replacement.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.3

hwL2VlanMappingOutsideVlanListLow

OCTET STRING(SIZE(256))

Read-create

This object indicates the low 2048 bits of the VLAN list. It identifies the VLAN list to be replaced. Each bit corresponds to one VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.4

hwL2VlanMappingOutsideVlanListHigh

OCTET STRING(SIZE(256))

Read-create

This object indicates the high 2048 bits of the VLAN list. It identifies the VLAN list to be replaced. Each bit corresponds to one VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.5

hwL2VlanMappingRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

The value of this object identifies the statuses of rows in hwL2VlanMappingTable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.3.1.1

hwSuperVlanId

INTEGER (1..4094)

Not-accessible

The value of this object identifies the super-VLAN index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.3.1.2

hwSubVlanListLow

OCTET STRING(SIZE(256))

Read-write

This object indicates the low 2048 bits of the VLAN list. It identifies the sub-VLANs of the super-VLAN. Each bit corresponds to one VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.3.1.3

hwSubVlanListHigh

OCTET STRING(SIZE(256))

Read-write

This object indicates the high 2048 bits of the VLAN list. It identifies the sub-VLANs of the super-VLAN. Each bit corresponds to one VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.1

hwL2UntagAddDTagPortIndex

Integer

Not-accessible

This object indicates the index of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.2

hwL2UntagAddDTagOuterVlanId

INTEGER (1..4094)

Read-create

This object indicates the outer VLAN tag added to an untagged packet.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.3

hwL2UntagAddDTagInnerVlanId

INTEGER (1..4094)

Read-create

This object indicates the inner VLAN tag added to an untagged packet.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.4

hwL2UntagAddDTagRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.1

hwL2VlanIpSubnetVlanVlanId

INTEGER (1..4094)

Not-accessible

This object specifies the VLAN ID.

The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.2

hwL2VlanIpSubnetVlanIpSubnetIndex

Integer(1..12)

Not-accessible

This object indicates the index of the IP subnet.

The value ranges from 1 to 12.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.3

hwL2VlanIpSubnetVlanIpAddress

OCTET STRING (SIZE (4))

Read-create

This object specifies the source IP address or source network address that is the basis of the subnet-based VLANs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.4

hwL2VlanIpSubnetVlanIpSubnetMask

OCTET STRING (SIZE (4))

Read-create

This object indicates the subnet mask.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.5

hwL2VlanIpSubnetVlanPriority

Integer(0..7)

Read-create

This object specifies the 802.1p priority of the VLAN corresponding to the specified IP address or network segment.

The value ranges from 0 to 7.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.6

hwL2VlanIpSubnetVlanRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object identifies the row status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.1

hwL2VlanMacVlanNewMac

OCTET STRING (SIZE (6))

Not-accessible

This object indicates the MAC address that is the basis of dividing VLANs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.2

hwL2VlanMacVlanNewVlanId

INTEGER (1..4094)

Read-create

This object specifies the VLAN ID.

The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.3

Integer32(0..7)

Read-create

This object identifies the 802.1p priority of the VLAN matching the MAC address.

The value ranges from 0 to 7.

The default value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.4

hwL2VlanMacVlanNewMacRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object identifies the row status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.1

hwL2VlanProtocolVlanNewVlanId

INTEGER (1..4094)

Not-accessible

This object specifies the VLAN ID set in the system view.

The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.2

hwL2VlanProtocolVlanNewProtocolIndex

Integer32(0..15)

Not-accessible

This object identifies the index of the protocol-based VLAN.

The value ranges from 0 to 15.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.3

hwL2VlanProtocolVlanNewProtocolType

INTEGER

{

at(1),

ipv4(2),

ipv6(3),

ipxEthernetii(4),

ipxLlc(5),

ipxRaw(6),

ipxSnap(7),

modeEthernetii(8),

modeLlc(9),

modeSnap(10)

}

Read-create

This object indicates the protocol type.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.4

hwL2VlanProtocolVlanNewProtocolTypeValue

OCTET STRING (SIZE(2))

Read-create

The value of the configured protocol type.

The relationship among hwL2VlanProtocolVlanNewProtocolType and hwL2VlanProtocolVlanNewProtocolTypeValue is as follows.

• ProtocolType: ipv4
  • ProtocolSubType: notused
  • ProtocolTypeValue: Zero length string
• ProtocolType: ipv6
  • ProtocolSubType: notused
  • ProtocolTypeValue: Zero length string
• ProtocolType: at
  • ProtocolSubType: notused
  • ProtocolTypeValue: Zero length string
• ProtocolType: ipx
  • ProtocolSubType:
    • ethernetii
    • llc
    • raw
    • snap
  • ProtocolTypeValue: Zero length string
• ProtocolType: mode-ethernetii
  • ProtocolSubType: etype
  • ProtocolTypeValue: hex string like '600', which means 0x0600. The range is [0x600..0xffff].
• ProtocolType: mode-llc
  • ProtocolSubType: etype
  • ProtocolTypeValue: the sequence of different parts is as follows: [dsap value;ssap value]. Both range is [0x00..0xff]. For example, if the values of dsap and ssap are 0x09 and 0x0a, the value is '090a'.
• ProtocolType: mode-snap
  • ProtocolSubType: etype
  • ProtocolTypeValue: hex string like '600', which means 0x0600. The range is [0x600..0xffff].

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.5

hwL2VlanProtocolVlanNewRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object identifies the row status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.1

hwL2VlanXlateInterfaceIndex

INTEGER

Not-accessible

This object indicates the interface index.

Value range: 1 to 65535.

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.2

hwL2VlanXlateVlanIdBegin

INTEGER (1..4094)

Not-accessible

This object indicates the inner VLAN ID before mapping.

Value range: 1 to 4094.

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.3

hwL2VlanXlateVlanIdEnd

Integer32 (0 | 1..4094)

Read-create

This object indicates the inner VLAN ID after mapping. At present, the value of this object can only be 0.

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.4

hwL2VlanXlateOuterVlanId

Integer32 (0 | 1..4094)

Not-accessible

This object indicates the outer VLAN ID before mapping.

Value range: 1 to 4094.

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.5

hwL2VlanXlateVlan8021p

Integer32

Not-accessible

This object indicates the inner priority before mapping.

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.6

hwL2VlanXlateDirection

Integer32

{

1: inbound(1)

2: outbound(2)

3: both(3)

}

Not-accessible

This object indicates the delivery direction. At present, only "both" is supported.

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.7

hwL2VlanXlateAction

INTEGER

{

1: map(1)

2: stack(2)

3: pop(3)

}

Read-create

This object indicates an action. Only mapping is supported.

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.8

hwL2VlanXlateToVlanId

Integer32 (0 | 1..4094)

Read-create

This object indicates the outer VLAN ID after mapping.

The value is an integer that ranges from 0 to 4094. If the value is 0, the new outer VLAN ID is the same as the original one.

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.9

hwL2VlanXlateToinnerVlanId

Integer32 (0 | 1..4094)

Read-create

This object indicates the inner VLAN ID after mapping.

The value is an integer that ranges from 0 to 4094. If the value is 0, the new inner VLAN ID is the same as the original one.

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.10

hwL2VlanXlateremark

Integer32

Read-create

This object indicates the priority in the outer VLAN tag.

The value ranges from 0 to 8. The value 8 indicates that no priority is configured.

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.51

hwL2VlanXlateRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status.

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.1

hwL2VlanProtocolVlanPortNewIndex

Integer32 (1..65535)

not-accessible

This object identifies the index of protocol-based VLAN entries on an interface. The index consists of the interface number and the protocol index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.2

hwL2VlanProtocolVlanPortNewVlanId

Integer32

not-accessible

This object specifies the VLAN ID set in the system view.

The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.3

hwL2VlanProtocolVlanPortNewProtocolIndex

Integer32

not-accessible

This object identifies the index of the protocol-based VLAN.

The value ranges from 0 to 15.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.4

hwL2VlanProtocolVlanPortNewPriority

Integer32

read-create

This object specifies the 802.1p priority of the VLAN matching the protocol.

The value ranges from 0 to 7.

The default value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.5

hwL2VlanProtocolVlanPortNewRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object identifies the row status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.1

hwL2VlanVoiceVlanPortIndex

Integer32(1..65535)

Not-accessible

The value of this object identifies the index of an interface enabled with voice VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.2

hwL2VlanVoiceVlanPortEnable

INTEGER{enabled(1),disabled(2)}

Read-write

The value of this object identifies the status of the voice VLAN on an interface.

• 1: enabled

• 2: disabled

By default, the voice VLAN on an interface is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.3

hwL2VlanVoiceVlanPortMode

INTEGER

{

auto (1),

manual (2)

}

Read-write

The value of this object identifies the mode of adding an interface to the voice VLAN.

• 1: auto

• 2: manual

By default, an interface is added to the voice VLAN in manual mode.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.4

hwL2VlanVoiceVlanPortLegacy

INTEGER{enabled(1),disabled(2)}

Read-write

The value of this object identifies the status of the voice VLAN Legacy on an interface.

• 1: enabled

• 2: disabled

By default, the voice VLAN Legacy on an interface is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.5

hwL2VlanVoiceVlanPortSecurityMode

INTEGER

Read-write

The value of this object identifies the working mode of a voice VLAN.

• 1: security

• 2: normal

By default, a voice VLAN works in normal mode.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.6

hwL2VlanVoiceVlanPortModifyPriorityMode

INTEGER

{

modifyPriByVlan (1),

modifyPriByOui (2)

}

read-write

The value of this object identifies the mode for an interface to increase the priority of voice packets.

• 1: Based on VLANs
• 2: Based on MAC addresses

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.1

hwL2VlanVoiceVlanOuiAddress

OCTET STRING (SIZE (6))

Not-accessible

This object indicates a MAC address that can be identified by voice VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.2

hwL2VlanVoiceVlanOuiMask

OCTET STRING (SIZE (6))

Not-accessible

This object indicates the mask of a MAC address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.3

hwL2VlanVoiceVlanOuiDescription

OCTET STRING (SIZE(0..80))

Read-create

This object indicates the description of an OUI address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.4

hwL2VlanVoiceVlanOuiRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.1

hwL2VlanSwitchExtName

OCTET STRING (SIZE (1..32))

Not-accessible

This object indicates the name of VLAN Switch.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.2

hwL2VlanSwitchExtSrcIfIndex

INTEGER

Read-create

This object indicates the index of the source interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.3

hwL2VlanSwitchExtOuterVlanId

Integer (0..4094)

Read-create

• For single-tagged frames, the value of this object is 0.

• For double-tagged frames, the value of this object identifies the outer VLAN ID.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.4

hwL2VlanSwitchExtVlanListLow

OCTET STRING (SIZE (256))

Read-create

This object indicates a VLAN ID ranging within the lower 2048 bits of the VLAN list.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.5

hwL2VlanSwitchExtVlanListHigh

OCTET STRING (SIZE (256))

Read-create

This object indicates the high 2048 bits of the VLAN list, each of which corresponds to a VLAN ID.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.6

hwL2VlanSwitchExtDstIfIndex

INTEGER

Read-create

This object indicates the index of the destination interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.7

hwL2VlanSwitchExtVlanXlateAction

NTEGER

{

unchange(1),

switch(2),

push(3)

}

Read-create

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.8

hwL2VlanSwitchExtDstVlan

Integer (0..4094)

Read-create

The value of this object identifies the VLAN ID in the outer VLAN tag.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.12

hwL2VlanSwitchExtLinkStatus

INTEGER

{

up(1),

down(2),

}

Read-only

The value of this object identifies the link status of VLAN Switch.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.51

hwL2VlanSwitchExtRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.1

hwL2VlanPolicyVlanNewMac

OCTET STRING (SIZE (6))

Not-accessible

This object indicates the source MAC address that is the basis of classifying policy VLANs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.2

hwL2VlanPolicyVlanNewIp

IPAddress

Not-accessible

This object indicates the source IP address that is the basis of classifying policy VLANs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.3

hwL2VlanPolicyVlanNewPort

Integer32

Not-accessible

This object indicates the source port that is the basis of classifying policy VLANs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.4

hwL2VlanPolicyVlanNewVlanId

INTEGER (1..4094)

Not-accessible

This object indicates the ID of a policy VLAN.

The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.5

hwL2VlanPolicyVlanNewVlanPriority

Integer32(0..7)

Read-create

This object indicates the 802.1p priority of the policy VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.6

hwL2VlanPolicyVlanNewRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.1

hwL2QinQVlanIfIndex

INTEGER

Not-accessible

This object indicates an interface index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.2

hwL2QinQVlanIdBegin

INTEGER (1..4094)

Not-accessible

This object indicates the start value of the outer VLAN tag before tag replacement. The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.3

hwL2QinQVlanIdEnd

INTEGER (1..4094)

Not-accessible

This object indicates the end value of the outer VLAN tag before tag replacement. The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.4

hwL2QinQVlanInnerVlanIdBegin

Integer32 (0 | 1..4094)

Not-accessible

This object indicates the start value of the inner VLAN tag before tag replacement. The value ranges from 0 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.5

hwL2QinQVlanInnerVlanIdEnd

Integer32 (0 | 1..4094)

Not-accessible

This object indicates the end value of the inner VLAN tag before tag replacement. The value ranges from 0 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.6

hwL2QinQVlan8021pBegin

Integer(0..8)

Not-accessible

This object indicates the start value of the 802.1p priority before tag replacement.

Currently, the value range of 0 to 7 is supported.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.7

hwL2QinQVlan8021pEnd

Integer(0..8)

Not-accessible

This object indicates the end value of the 802.1p priority before tag replacement.

Currently, the value range of 0 to 7 is supported.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.8

hwL2QinQVlanEtherType

Integer(0..65535)

Not-accessible

This object indicates the Ethernet type before tag replacement.

The value of hwL2QinQVlan8021pBegin ranges from 1 to 65535.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.9

hwL2QinQVlanMode

INTEGER

{

stacking(1),

mapping(2),

cosstacking(3),

cosmapping(4),

mapping2to1(5),

mapping2to2(6)

}

Read-create

The value of this object identifies the configuration mode of hwL2QinQVlanTable.

• stacking(1)

  After receiving a tagged frame, an interface adds a tag to the frame according to the carried VLAN ID.

• mapping(2)

  After receiving a tagged frame, an interface maps the carried tag to a specified tag according to the carried VLAN ID.

• cosstacking(3)

  After receiving a tagged frame, an interface adds a tag to the frame and maps the inner tag to a specified VLAN ID according to the carried VLAN ID and 802.1p priority.

• cosmapping(4)

  After receiving a tagged frame, an interface maps the carried tag to a specified tag according to the carried VLAN ID and 802.1p priority.

• mapping2to1(5)

  After receiving a tagged frame, an interface maps the outer tag to a specified tag and transparently transmits the inner tag.

• mapping2to2(6)

  After receiving a tagged frame, an interface maps both tags to specified tags.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.10

hwL2QinQVlanChangedVlanId

INTEGER (1..4094)

Read-create

This object indicates the VLAN ID in the outer tag after tag replacement. The value ranges from 0 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.11

hwL2QinQVlanChangedInnerVlanId

Integer32 (0 | 1..4094)

Read-create

This object indicates the VLAN ID in the inner tag after tag replacement. The value ranges from 0 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.12

hwL2QinQVlanRemark

Integer(0..8)

Read-create

The value of this object identifies the 802.1p priority after tag replacement.

Currently, the value range of 0 to 7 is supported.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.13

hwL2QinQVlanMapStackVlanId

Integer32 (0 | 1..4094)

Read-create

This object indicates the VLAN ID in the inner tag after tag replacement. The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.14

hwL2QinQVlanRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.15

hwL2QinQVlanInnerRemark

Integer32(0..8)

read-create

The value of this object identifies changed priority in the inner VLAN tag. No change is needed if the value is 8.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.1

hwL2VlanMultiVoiceVlanIfIndex

INTEGER

Not-accessible

This object indicates the index of an interface enabled with voice VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.2

hwL2VlanMultiVoiceVlanPortVLanId

INTEGER (1..4094)

Read-create

This object indicates the ID of the voice VLAN.

The value ranges from 2 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.3

hwL2VlanMultiVoiceVlanPortUntagEnable

INTEGER

{

enabled (1),

disabled (2)

}

read-write

The value of this object identifies whether untagged voice service packets can be forwarded in a voice VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.4

hwL2VlanMultiVoiceVlanPortTag0Enable

INTEGER

{

enabled (1),

disabled (2)

}

read-write

The value of this object identifies whether voice packets carrying VLAN ID 0 can be forwarded in a voice service VLAN.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.51

hwL2VlanMultiVoiceVlanPortRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.4.2

hwVcmpServerMacConflict

hwVcmpDeviceMac

This object indicates that multiple servers coexist in the same VCMP domain.

This trap is generated when a VCMP configuration error occurs.

To rectify the fault, configure the devices to ensure that only a single server device exists in the same VCMP domain.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.3.1.4.3

hwVcmpRevisionConflict

hwVcmpDeviceMac

After a client sent the server a VCMP request packet due to a restart or a configuration change, the left-most 16 bits in the configuration revision number in a received VCMP packet are the same as that of the local version number, whereas, the right-most 16 bits are greater than the local ones.

After this trap is displayed, VLAN information on the server cannot be sent to the clients in the same VCMP domain.

To rectify the fault, reconfigure the server to ensure that the configurations are complete and correct.

This object is implemented as defined in the corresponding MIB file.