HUAWEI-SMARTLINK-MIB

1.3.6.1.4.1.2011.5.25.42.5.1.1

hwSmartLinkRevFlushTotal

INTEGER (0..4294967295)

Read-only

This object indicates the total number of Flush packets received by this device.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.2

hwSmartLinkRevLastFlushIfIndex

Integer32 (0..2147483647)

Read-only

This object indicates the interface that receives Flush packets for the last time.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.3

hwSmartLinkRevLastFlushTime

OCTET STRING (SIZE (8))

Read-only

This object indicates the time when Flush packets are received for the last time.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.4

hwSmartLinkRevLastFlushSourceMacAddr

OCTET STRING (SIZE (8))

Read-only

This object specifies the source MAC address where Flush packets are received for the last time.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.5

hwSmartLinkRevLastFlushVlan

Integer32 (0 | 1..4094)

Read-only

This object specifies the received VLAN ID of the Flush packet received for the last time.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.6

hwSmartLinkResetFlushStatistics

INTEGER

Read-write

This object indicates whether to clear the statistics of Flush packets received and sent. This object has the following values:

• 1: cleared
• 2: unused

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.7.1.1

hwSmartLinkRpcIfIndex

INTEGER

Not-accessible

This object identifies the index of the port receiving Flush packets.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.7.1.2

hwSmartLinkRpcRevVlan

Integer32 (0..4095)

Read-write

This object specifies the VLAN ID of the port receiving Flush packets.

The value range is 0 to 4095.

The value 0 indicate that the object will be deleted. The value 4095 indicates that all VLANs are specified.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.7.1.3

hwSmartLinkRpcRevPassword

OCTET STRING

Read-create

This object specifies the check password of the port receiving Flush packets.

The password is 0 to 16 characters in length.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.7.1.4

hwSmartLinkRpcRevAuthMode

INTEGER (0..2)

read-create

This node identifies the encryption mode received by the flush message.

• 0: Password authentication is not configured
• 1: Password authentication method is simple
• 2: Password authentication method is sha

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.13.1.1

hwSmartLinkMulRpcIfIndex

INTEGER

not-accessible

This object identifies the index of the interface that receives Flush packets.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.13.1.2

hwSmartLinkMulRpcVlan

INTEGER32

not-accessible

This object identifies the index of the control VLAN that receives Flush packets.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.13.1.3

hwSmartLinkMulRpcRevPassword

OCTET STRING

read-write

This object indicates the password for the interface to receive Flush packets.

The value ranges from 0 to 16.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.13.1.4

hwSmartLinkMulRpcRevAuthMode

INTEGER (0..2)

read-create

This object indicates the encryption mode for receiving Flush packets.

• 0: Password authentication is not configured.
• 1: Simple authentication is configured.
• 2: SHA authentication is configured.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.13.1.50

hwSmartLinkMulRpcRevRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status:

• 1: active
• 2: notInService
• 3: notReady
• 4: createAndGo
• 5: createAndWait
• 6: destroy

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.8.1.1

hwSmartLinkGcGroupId

Integer32

Not-accessible

This object identifies the ID of a Smart Link group.

The value range is 1 to 16.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.8.1.2

hwSmartLinkGcMasterIfIndex

Integer32 (0..2147483647)

Read-only

This object identifies the port index of the master port of a Smart Link group.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.8.1.3

hwSmartLinkGcSlaveIfIndex

Integer32 (0..2147483647)

Read-only

This object identifies the port index of the slave port of a Smart Link group.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.8.1.4

hwSmartLinkGcGroupStatus

INTEGER

Read-only

This object identifies the status of a Smart Link group. This object has the following values:

• 1: none
• 2: master
• 3: slave
• 4: idle
• 5: init

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.8.1.5

hwSmartLinkGcEnable

INTEGER{enabled(1),disabled(2)}

Read-create

This object indicates whether a Smart Link group is enabled or disabled. This object has the following values:

• 1: enabled
• 2: disable

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.8.1.6

hwSmartLinkGcSendControlVlan

Integer

Read-create

This object identifies the VLAN tag contained in a sent Flush packet.

The value range is 1 to 4094. The default value is "0".

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.8.1.7

hwSmartLinkGcSendPassword

Octet String

Read-create

This object identifies the password contained in a sent Flush packet.

The password is 1 to 16 characters in length.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.8.1.8

hwSmartLinkGcLock

INTEGER{enabled(1),disabled(2)}

Read-create

This object indicates whether the active link is locked on the master port. This object has the following values:

• 1: enabled
• 2: disable

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.8.1.9

hwSmartLinkGcForce

INTEGER{enabled(1),disabled(2)}

Read-create

This object indicates whether the active link is locked on the slave port. This object has the following values:

• 1: enabled
• 2: disable

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.8.1.10

hwSmartLinkGcRevertWtrTime

Integer32

Read-create

This object identifies the preset recovery time of a SmartLink group.

The default value is 60.

The value range is 30 to 1200.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.8.1.11

hwSmartLinkGcRevertEnable

INTEGER{enabled(1),disabled(2)}

Read-create

This object indicates whether the recovery function of a Smart Link group is enabled or disabled. This object has the following values:

• 1: enabled
• 2: disable

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.8.1.12

hwSmartLinkGcManual

Integer

Read-create

This object indicates the switchover status of a link. This object has the following values:

• 1: switch
• 2: unused

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.8.1.13

hwSmartLinkGcRowStatus

Integer

Read-create

This object indicates the row status. The object has the following values:

• 1: active
• 2: notInService
• 3: notReady
• 4: createAndGo
• 5: createAndWait
• 6: destroy

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.8.1.14

hwSmartLinkGcAuthMode

INTEGER(0..2)

read-create

This node identifies the encryption mode received by the flush message.

• 0: Password authentication is not configured
• 1: Password authentication method is simple
• 2: Password authentication method is sha

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.9.1.1

hwSmartLinkPcGroupId

Integer32

Not-accessible

This object identifies the ID of a Smart Link group.

The value range is 1 to 16.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.9.1.2

hwSmartLinkPcPortType

INTEGER

Not-accessible

This object identifies the master or slave port of a Smart Link group. This object has the following values:

• 1: master
• 2: slave

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.9.1.3

hwSmartLinkPcIfIndex

Integer32 (0..2147483647)

Read-create

This object identifies the index of a member port.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.9.1.4

hwSmartLinkPcPortImplemented Specifications

INTEGER

Read-only

This object indicates the status of a member port. This object has the following values:

• 1: unknown
• 2: active
• 3: inactive

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.9.1.5

hwSmartLinkPcSendFlushNum

INTEGER (0..4294967295)

Read-only

This object indicates the total number of Flush packets sent by a member port.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.9.1.6

hwSmartLinkPcSendFlushTime

OCTET STRING (SIZE (8))

Read-only

This object indicates the time when a member port sends the last Flush packet.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.9.1.7

hwSmartLinkPcRowStatus

Integer

Read-create

This object indicates the row status. The object has the following values:

• 1: active
• 2: notInService
• 3: notReady
• 4: createAndGo
• 5: createAndWait
• 6: destroy

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.10.1.1

hwMonitorLinkGcGroupId

Integer

Not-accessible

This object identifies the ID of a Monitor Link group.

The value range is 1 to 16.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.10.1.2

hwMonitorLinkGcRecoverTime

Integer

Read-create

This object identifies the preset recovery time of a Monitor Link group.

The default value is 3.

The value range is 3 to 60.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.10.1.3

hwMonitorLinkGcRowStatus

Integer

Read-create

This object indicates the row status. This object has the following values:

• 1: active
• 2: notInService
• 3: notReady
• 4: createAndGo
• 5: createAndWait
• 6: destroy

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.11.1.1

hwMonitorLinkUlGroupId

Integer32

Not-accessible

This object identifies the ID of a Monitor Link group.

The value range is 1 to 16.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.11.1.2

hwMonitorLinkUlPortType

INTEGER

Not-accessible

This object identifies the type of a port. This object has the following values:

• 1: smartLink
• 2: switchPort

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.11.1.3

hwMonitorLinkUlPortValue

Integer32

Read-create

This object identifies the index of an uplink member port.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.11.1.4

hwMonitorLinkUlPortStatus

INTEGER

Read-only

This object identifies the status of a port. This object has the following values:

• 1: up
• 2: down

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.11.1.5

hwMonitorLinkUlPortUpTime

OCTET STRING (SIZE (8))

Read-only

This object indicates the latest time when a port is in the up state.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.11.1.6

hwMonitorLinkUlPortDownTime

OCTET STRING (SIZE (8))

Read-only

This object indicates the latest time when a port is in the down state.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.11.1.7

hwMonitorLinkUlRowStatus

Integer

Read-create

This object indicates the row status. This object has the following values:

• 1: active
• 2: notInService
• 3: notReady
• 4: createAndGo
• 5: createAndWait
• 6: destroy

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.12.1.1

hwMonitorLinkDlGroupId

Integer32

Not-accessible

This object identifies the ID of a Monitor Link group.

The value range is 1 to 16.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.12.1.2

hwMonitorLinkDlArrayIndex

Integer32

Not-accessible

This object identifies the array index of a downlink.

The value range is 1 to 512.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.12.1.3

hwMonitorLinkDlIfIndex

Integer32 (0..2147483647)

Read-create

This object identifies the index of the two downlink member ports.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.12.1.4

hwMonitorLinkDlPortStatus

INTEGER

Read-only

This object identifies the status of a port. This object has the following values:

• 1: up
• 2: down

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.12.1.5

hwMonitorLinkDlPortUpTime

OCTET STRING (SIZE (8))

Read-only

This object indicates the latest time when a port is in the up state.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.12.1.6

hwMonitorLinkDlPortDownTime

OCTET STRING (SIZE (8))

Read-only

This object indicates the latest time when a port is in the down state.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.12.1.7

hwMonitorLinkDlRowStatus

Integer

Read-create

This object indicates the row status. This object has the following values:

• 1: active
• 2: notInService
• 3: notReady
• 4: createAndGo
• 5: createAndWait
• 6: destroy

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.2.1

hwSmartLinkLinkSwitch

hwSmartLinkGCGroupStatus

This object indicates whether to give an alarm when the status of a Smart Link group changes.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.2.2

hwSmartLinkInactiveLinkFail

hwSmartLinkPcIfIndex

This object indicates whether to give an alarm when it is detected that an inactive link in a Smart Link group is faulty.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.2.3

hwSmartLinkInactiveLinkResume

hwSmartLinkPcIfIndex

This object indicates whether to give an alarm when it is detected that an inactive link in a Smart Link group recovers from a failure.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.2.4

hwSmartLinkGroupEnable

hwSmartLinkGcEnable

This object indicates whether to give an alarm when a Smart Link group is enabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.2.5

hwSmartLinkGroupDisable

hwSmartLinkGcEnable

This object indicates whether to give an alarm when a Smart Link group is disabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.5.1.14

hwSmartLinkPcIfName

OCTET STRING

The name of a member port.

accessible-for-notify

This object is implemented as defined in the corresponding MIB file.