HUAWEI-MPLSLSR-EXT-MIB

1.3.6.1.4.1.2011.5.25.182.1.1

hwMplsLsrId

OCTET STRING (SIZE (4))

Read-write

This object indicates the creation of the MPLS LSR ID. Before the MPLS capability is enabled, the MPLS LSR ID must be configured. After the MPLS capability is enabled, the MPLS LSR ID cannot be modified or deleted. If the MPLS LSR ID is set as 0.0.0.0, it indicates that the MPLS LSR ID is deleted. The MPLS LSR ID and the MPLS capability cannot be configured together.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.2

hwMplsCapabilityConfig

INTEGER{enabled(1),disabled(2)}

Read-write

This object indicates the configuration or deletion of the MPLS capability. Before the MPLS capability is enabled, the MPLS LSR ID must be configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.3

hwMplsLabelAdvertise

INTEGER{explicitNull(1),implicitNull(2),nonNull(3)}

Read-write

This object indicates the way to configure label advertisement policy. By default, the label advertisement policy is implicitnull. Before the label advertisement policy is enabled, the MPLS capability must be enabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.5

hwMplsBfdCapabilityConfig

INTEGER{enabled(1),disabled(2)}

Read-write

This object indicates the configuration or deletion of the MPLS BFD capability. Before the MPLS BFD function is enabled, you must enable the MPLS capability and BFD capability.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.6

hwMplsBfdMinTx

Integer32

Read-write

This object indicates the minimum forwarding period. If the minimum forwarding period is set as 0 seconds, it indicates that the minimum forwarding period returns to the default value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.7

hwMplsBfdMinRx

Integer32

Read-write

This object indicates the minimum receiving period. If the minimum receiving period is set as 0 seconds, it indicates that the minimum receiving period returns to the default value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.8

hwMplsBfdDetectMultiplier

Integer32

Read-write

This object indicates the value of the detect multiplier. If the value of the detect multiplier is set as 0, it indicates that the value returns to the default value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.9

hwMplsFecListName

OCTET STRING (SIZE (1..64))

Read-write

This object indicates the name of the FEC LIST. The name of the FEC LIST is globally unique, with a valid length from 1 to 31 characters. If the character length is 0, it indicates that the FEC LIST is deleted. Furthermore, the FEC LIST cannot be modified, and you can only delete the FEC LIST and create a new one. If the FEC LIST is used by others, you need to cancel the usage and then delete the FEC LIST.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.10

hwMplsBfdTrigger

INTEGER{triggerHost(1),triggerFeclist(2),disabled(3)}

Read-write

This object indicates the MPLS BFD triggering policy. By default, the MPLS BFD trigger policy is host. By using this object, you can also specify the next hop and the outgoing interface. To configure the MPLS BFD triggering policy, you must enable MPLS and BFD in advance. In addition, this MPLS BFD triggering policy cannot be modified, and you can only delete the policy and then create a new one.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.11

hwMplsBfdTriggerNextHop

OCTET STRING (SIZE (4))

Read-write

This object indicates the next hop when the MPLS BFD trigger policy is configured as host. The next hop and the outgoing interface can be specified at the same time.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.12

hwMplsBfdTriggerInterface

INTEGER (0..4294967295)

Read-write

This object indicates the outgoing interface when the MPLS BFD trigger policy is configured as host. The next hop and the outgoing interface can be specified at the same time. In addition, you can get the correct interface index based on the ifIndex of ifTable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.13

hwMplsBfdTriggerFecListName

OCTET STRING (SIZE (1..64))

Read-write

This object indicates the FEC list when the MPLS BFD trigger policy is configured. The valid length of the FEC list ranges from 1 to 31 characters. If the specified FEC list does not exist, or the specified FEC list contains no FEC node, no LSP can be triggered.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.14

hwLdpVirtualTunnelFEC

INTEGER (0..4294967295)

accessible-for-notify

Destination address of the LDP virtual tunnel, that is, the index of the virtual tunnel

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.15

hwMplsBgpBfdCapabilityConfig

INTEGER{enabled(1),disabled(2)}

Read-write

This object indicates the MPLS BGP BFD capability status.

MPLS and BFD must be enabled before MPLS BGP BFD is enabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.182.1.16

hwMplsBgpBfdMinTx

Integer32

Read-write

The value of this object identifies the minimum interval (in ms) at which BGP BFD packets are sent. Value 0 indicates the default minimum interval at which BGP BFD packets are sent.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.182.1.17

hwMplsBgpBfdMinRx

Integer32

Read-write

The value of this object identifies the minimum interval (in ms) at which BGP BFD packets are received. Value 0 indicates the default minimum interval at which BGP BFD packets are received.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.182.1.18

hwMplsBgpBfdDetectMultiplier

Integer32

Read-write

The value of this object identifies the multiplier for BGP BFD detection. Value 0 indicates the default multiplier for BGP BFD detection.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.182.1.19

hwMplsBgpBfdTriggerTunnel

INTEGER{ triggerHost(1), triggerIpPrefix(2), disabled(3) }

Read-write

This object indicates a BGP BFD session trigger policy. The value can be:

• 1: BGP BFD sessions are established using host addresses.

• 2: BGP BFD sessions are established using an IP address prefix list.

• 3. No policy for establishing BGP BFD sessions is configured.

The default value is 3.

MPLS and BFD must be enabled before a policy for establishing BGP BFD sessions is configured.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.182.1.20

hwMplsBgpBfdTriggerTunnelIpprefix

OCTET STRING (SIZE (1..64))

Read-write

This object indicates the name of an IP address prefix list used to establish BGP BFD sessions. The value is a string of 1 to 169 characters.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.182.1.50.1.2

hwMplsFecNodeIpAddress

OCTET STRING (SIZE (4))

Not-accessible

This object indicates the IP address of the specified FEC node.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.50.1.3

hwMplsFecNodeInterface

INTEGER (0..4294967295)

Not-accessible

This object indicates the outgoing interface of the FEC node. You can acquire the correct interface index based on ifIndex of ifTable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.50.1.4

hwMplsFecNodeNextHop

OCTET STRING (SIZE (4))

Not-accessible

This object indicates the next hop of the FEC node.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.50.1.51

hwMplsFecListRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates whether one entry of FEC list table is created or destroyed. The value of the object can be CreatAndGo or Destroy. If the value is set as CreatAndGo, and the entry is created in hwFecListTable, the status of the object is changed into active.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.51.1.1

hwMplsInterfaceIndex

INTEGER

Not-accessible

This object indicates the interface index. You can get the correct interface index based on the ifIndex of ifTable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.51.1.11

hwMplsMtu

Integer32

Read-create

This object indicates the MPLS MTU of an interface. If the value of the MPLS MTU is set as 0, it indicates that the MPLS MTU is deleted.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.51.1.51

hwMplsInterfaceRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates whether one entry is created or deleted in hwMplsInterfaceTable. The value of the object can be CreateAndGo and Destroy. When the value is set as CreateAndGo, and the entry is created, the status of the object is changed into active.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.52.1.1

hwLdpStaticFrrPriority

Integer32 (1..65535)

Not-accessible

This object indicates the priority of a static FRR entry.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.52.1.11

hwLdpStaticFrrNextHop

OCTET STRING (SIZE (4))

Read-create

This object indicates the next hop of the static FRR.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.52.1.12

hwLdpStaticFrrIpPrefix

OCTET STRING (SIZE (1..64))

Read-create

This object indicates the IP prefix policy. The valid prefix length ranges from 1 to 169 characters. When the length is 0, it indicates that the policy is deleted.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.52.1.51

hwLdpStaticFrrInterfaceRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates whether one entry is created or deleted in hwLdpStaticFrrInterfaceTable. The value of the object can be CreateAndGo or Destroy. When the value is set as CreateAndGo, and the entry is created, the status of the object is changed into active.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.53.1.1

hwLdpVirtualTunnelIndex

INTEGER (0..4294967295)

Not-accessible

Destination address of the LDP virtual tunnel, that is, the index of the virtual tunnel

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.53.1.2

hwLdpVirtualStatus

INTEGER { up(1), down(2), testing(3) -- in some test mode }

Read-only

Status of the LDP virtual tunnel

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.53.1.3

hwLdpXcIndexArray

OctetString

Read-only

xc index of the members of the LDP virtual tunnel

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.53.1.4

hwLdpOutSegmentIndexArray

OctetString

Read-only

outsegment index of the members of the LDP virtual tunnel

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.55.1.1

hwMplsStaticLspName

OCTET STRING (SIZE (1..64))

Not-accessible

This object indicates the name of static LSP.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.55.1.11

hwMplsStaticLspType

INTEGER { ingress(1), transit(2), egress(3), ingress-bind-tunnel(4) }

Read-create

This object is used to identify the type of static LSP.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.55.1.12

hwMplsStaticLspInIntfIndex

INTEGER (0..4294967295)

Read-create

This object indicates the incoming-interface index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.55.1.13

hwMplsStaticLspInLabel

Unsigned32 (0..4294967295)

Read-create

This object indicates the in-label.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.55.1.14

hwMplsStaticLspLsrId

OCTET STRING (SIZE (4))

Read-create

This object indicates the LSR ID of ingress static LSP.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.55.1.15

hwMplsStaticLspTunnelID

INTEGER (0..4294967295)

Read-create

This object indicates the Tunnel ID of ingress static LSP.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.55.1.16

hwMplsStaticLspNextHop

OCTET STRING (SIZE (4))

Read-create

This object indicates the nexthop of static LSP.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.55.1.17

hwMplsStaticLspOutIntfIndex

INTEGER (0..4294967295)

Read-create

This object indicates the outgoing-interface index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.55.1.18

hwMplsStaticLspOutLabel

Unsigned32 (0..4294967295)

Read-create

This object indicates the out-label.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.55.1.19

hwMplsStaticLspDestAddr

OCTET STRING (SIZE (4))

Read-create

This object indicates the destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.55.1.20

hwMplsStaticLspMaskLen

INTEGER (0..4294967295)

Read-create

This object indicates the mask length.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.55.1.51

hwMplsStaticLspRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates whether one entry is created or deleted in hwMplsStaticLspTable. The value of the object can be CreateAndGo or Destroy. When the value is set as CreateAndGo, and the entry is created, the status of the object will change into active.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.54.1

hwMplsLdpVirtualTunnelUp

hwLdpVirtualTunnelFEC

This alarm is generated when the LDP virtual tunnel goes Up.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.54.2

hwMplsLdpVirtualTunnelDown

hwLdpVirtualTunnelFEC

This alarm is generated when the LDP virtual tunnel goes Down.

This object is implemented as defined in the corresponding MIB files.