HUAWEI-WLAN-AP-MIB

1.3.6.1.4.1.2011.6.139.13.3.1.1

hwWlanApPingApMac

MacAddress

read-write

This object specifies the MAC address in an AP ping operation. If the AP ID and MAC address are specified concurrently, the AP is pinged based on the MAC address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.1.2

hwWlanApPingAddress

OCTET STRING

read-write

This object indicates the domain name or IP address of the destination host.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.1.3

hwWlanApPingCount

Integer32(1–10)

read-write

This object indicates the number of times ICMP ECHO-REQUEST packets are sent.

Default value: 4

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.1.4

hwWlanApPingPacketSize

Integer32(20–8100)

read-write

This object indicates the length of an ECHO-REQUEST packet excluding the IP header and ICMP header.

Unit: byte

Default value: 56

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.1.5

hwWlanApPingWaitTime

Integer32(1–5000)

read-write

This object indicates the time to wait before sending the next ICMP Request packet.

Unit: ms

Default value: 2000

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.1.6

hwWlanApPingTimeOut

Integer32(500–5000)

read-write

This object indicates the timeout period for an ECHO-RESPONSE after an ECHO-REQUEST is sent.

Unit: ms

Default value: 2000

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.1.7

hwWlanApPingResultSuccessCount

Integer32

read-only

This object indicates the number of successful AP ping operations. Only the result of the latest AP ping operation is kept.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.1.8

hwWlanApPingResultFailureCount

Integer32

read-only

This object indicates the number of AP ping operation failures. Only the result of the latest AP ping operation is kept.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.1.9

hwWlanApPingResultAveResponseTime

Integer32

read-only

This object indicates the average response time for an AP ping operation. Only the result of the latest AP ping operation is kept.

Unit: ms

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.1.10

hwWlanApPingResultMinResponseTime

Integer32

read-only

This object indicates the minimum response time for an AP ping operation. Only the result of the latest AP ping operation is kept.

Unit: ms

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.1.11

hwWlanApPingResultMaxResponseTime

Integer32

read-only

This object indicates the maximum response time for an AP ping operation. Only the result of the latest AP ping operation is kept.

Unit: ms

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.1.12

hwWlanApPingResultFlag

Integer{false(1),true(2)}

read-only

This object indicates the result of the AP ping operation. If the object is executed during the ping operation, false is returned; if the object is executed after the ping operation is complete, true is returned.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.1.2.59

hwApPowerWorkMode

OCTET STRING[0..10]

accessible-for-notify

This object indicates the actual power supply mode of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.1.2.60

hwApExpectPowerWorkMode

OCTET STRING[0..10]

accessible-for-notify

This object indicates the expected power supply mode of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.1.2.73

hwWlanApTemperatureType

OCTET STRING

read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.1.1.1

hwWlanApType

OCTET STRING

read-create

This object indicates the AP type name. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.1.1.2

hwWlanApTypeDesc

OCTET STRING

read-only

This object indicates description of an AP type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.1.1.3

hwWlanApTypeWiredPortNum

Integer32

read-only

This object indicates the number of wired ports on APs of a certain type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.1.1.4

hwWlanApTypeRadioNum

Integer32

read-only

This object indicates the number of radios on APs of a certain type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.1.1.5

hwWlanApTypeMaxStaNum

Integer32

read-only

This object indicates the maximum number of access STAs on an AP of a certain type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.1.1.6

hwWlanApTypeReset

Integer32

read-write

This object indicates that APs are restarted based on the AP type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.1.1.7

hwWlanApTypeExternalAntenna

INTEGER{notSupport(1),support(2)}

read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.1.1.8

hwWlanApTypeID

Integer32(0..255)

read-write

This object indicates the ID of an AP type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.1.1.9

hwWlanApTypeOperate

INTEGER{add(1),delete(2)}

read-write

This object indicates the operation on an AP type.

• 1: creation
• 2: deletion

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.1.1.10

hwWlanApTypeConfigurationMethod

OCTET STRING (1..31)

read-only

This object indicates the AP type configuration method.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.1.1.11

hwWlanApTypeAutoCreateMethod

INTEGER{create-by-id(1),create-by-type(2),create-all(3)}

read-write

This object indicates how AP types are automatically created.

• 1: The AP type is automatically created by ID.
• 2: The AP type is automatically created by description.
• 3: All AP types are automatically created.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.2.1.1

hwWlanApTypeRadioIndex

Integer32

not-accessible

This object indicates the radio index of APs of a certain type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.2.1.2

hwWlanApTypeRadioType

INTEGER{wlan80211a(1),wlan80211b(2),wlan80211g(3),wlan80211bg(4),wlan80211an(5),wlan80211bgn(6),wlan80211abgn(7),wlan80211ac(8),wlan80211anac(9),wlan80211bgnax(10),wlan80211anacax(11),wlan80211ax(12)}

read-only

This object indicates the radio type of APs of a certain type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.2.1.3

hwWlanRadioMaxSpatialStreamsNum

Unsigned32

read-only

This object indicates the maximum number of spatial streams of an AP radio.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.2.1.4

hwWlanApTypeRadioAntennaGain

Integer32

read-only

This object indicates that the antenna gain is configured according to the radio ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.2.1.5

hwWlanApTypeRadioMaxVAPNum

Unsigned32

read-only

This object indicates the maximum number of VAPs that a radio supports.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.3.1.1

hwWlanApTypeWiredPortIndex

Integer32

not-accessible

This object indicates the index of an AP's wired interface.

Numbering rule: port-index = port-type * 100 + port-number. For example, the indexes of a wall plate AP's GE0, eth0, and eth1 are 200 (2 * 100 + 0 = 200), 100 (1 * 100 + 0 = 100), and 101 (1 * 100 + 1 = 101) respectively.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.3.1.2

hwWlanApTypeWiredPortType

INTEGER{fe(1),ge(2),gpon(3),epon(4),adsl2plus(5),ethTrunk(6),multige(7)}

read-only

This object indicates the type of an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.3.1.3

hwWlanApTypeWiredPortName

OCTET STRING

read-only

This object indicates the name of a wired interface on APs of a certain type, for example, ethernet 0, ethernet 1, gigabit-ethernet 0, and eth-trunk 0.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.4.1.1

hwWlanApTypeUndefined

OCTET STRING (1..31)

read-only

This object indicates the description of an undefined AP type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.4.1.2

hwWlanApTypeIDUndefined

Integer32 (0..255)

read-only

This object indicates the ID of an undefined AP type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.4.1.3

hwWlanApTypeUndefinedReportApMac

MacAddress

read-only

This object indicates the MAC address of an AP that reports an undefined AP type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.4.1.4

hwWlanApTypeUndefinedReportTime

OCTET STRING

read-only

This object indicates the time when an undefined AP type is reported.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.4.1.5

hwWlanApTypeUndefinedOperate

INTEGER{ delete(1) }

read-write

This object indicates the operation to be performed on undefined AP types. The value 1 indicates that undefined AP types are deleted.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.5.1.1

hwWlanApTypeAttributesAbnormalCheck

OCTET STRING (1..31)

read-only

This object indicates the type of an AP that reports an attribute check exception.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.5.1.2

hwWlanApTypeIDAttributesAbnormalCheck

Integer32 (0..255)

read-only

This object indicates the type ID of an AP that reports an attribute check exception.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.5.1.3

hwWlanApTypeAttributesAbnormalCheckResult

INTEGER{risk(1),fail(2)}

read-only

This object indicates the attribute check result of an AP.

• 1: The AP is incompatible with the AC.
• 2: The AP fails to connect to the AC.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.5.1.4

hwWlanApTypeAttributesAbnormalCheckReason

INTEGER{rangeconflict(1),lostattributes(2)}

read-only

This object indicates the cause of an AP's attribute check result.

• 1: Parameter range conflict
• 2: Lack of parameters

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.2.1.1

hwWlanUnauthedApRecordIndex

Integer32

not-accessible

This object indicates the index of a rogue AP record.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.2.1.2

hwWlanUnauthedApType

OCTET STRING

read-only

This object indicates the type of a rogue AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.2.1.3

hwWlanUnauthedApMacAddress

MacAddress

read-only

This object indicates the MAC address of a rogue AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.2.1.4

hwWlanUnauthedApSn

OCTET STRING

read-only

This object indicates the SN of a rogue AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.2.1.5

hwWlanUnauthedApIpAddress

IpAddress

read-only

This object indicates the IP address of a rogue AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.2.1.6

hwWlanUnauthedApRecordTime

OCTET STRING (SIZE (8 | 11))

read-only

This object indicates the time when a rogue AP is recorded.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.2.1.7

hwWlanUnauthedApIpv6Address

OCTET STRING[0,255]

read-only

This object indicates the IPv6 address of a rogue AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.1

hwWlanApMac

MacAddress

accessible-for-notify

This object indicates the MAC address of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.2

hwWlanApSn

OCTET STRING

read-write

This object indicates the sequence number (SN) of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.3

hwWlanApTypeInfo

OCTET STRING

read-only

This object indicates the AP type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.4

hwWlanApName

OCTET STRING

read-write

This object indicates the AP name.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.5

hwWlanApGroup

OCTET STRING

read-write

This object indicates the group to which an AP belongs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.6

hwWlanApRunState

INTEGER{idle(1),autofind(2),typeNotMatch(3),fault(4),config(5),configFailed(6),download(7),normal(8),committing(9),commitFailed(10),standby(11),verMismatch(12),nameConflicted(13),invalid(14),countryCodeMismatch(15)}

read-only

This object indicates the AP state.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.7

hwWlanApSoftwareVersion

OCTET STRING

read-only

This object indicates the AP software version.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.8

hwWlanApHardwareVersion

OCTET STRING

read-only

This object indicates the AP hardware version.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.9

hwWlanApCpuType

OCTET STRING

read-only

This object indicates the CPU type of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.10

hwWlanApCpufrequency

Integer32

read-only

This object indicates the CPU frequency of an AP.

Unit: MHz

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.11

hwWlanApMemoryType

OCTET STRING

read-only

This object indicates the memory type of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.12

hwWlanApDomain

OCTET STRING

read-only

This object indicates the AP domain.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.13

hwWlanApIpAddress

IpAddress

read-only

This object indicates the IP address of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.14

hwWlanApIpNetMask

IpAddress

read-only

This object indicates the IP address mask of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.15

hwWlanApGatewayIp

IpAddress

read-only

This object indicates the gateway IP address of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.16

hwWlanApMemorySize

Integer32

read-only

This object indicates the memory size of an AP.

Unit: MB

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.17

hwWlanApFlashSize

Integer32

read-only

This object indicates the flash memory size of an AP.

Unit: MB

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.18

hwWlanApRunTime

Unsigned32

read-only

This object indicates the running time of an AP.

Unit: tick

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.19

hwWlanApAdminOper

INTEGER{reset(1),confirm(2),manufacturerConfig(3)}

read-create

This object indicates administrative status of an AP.

Only the write operation is supported. The read operation is not supported.

1.3.6.1.4.1.2011.6.139.13.3.3.1.20

hwWlanApDNS

IpAddress

read-only

This object indicates the AP DNS.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.21

hwWlanApOnlineTime

Unsigned32

read-only

This object indicates online duration of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.22

hwWlanApSysSoftwareDesc

OCTET STRING

read-only

This object indicates system software description of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.23

hwWlanApSysHardtwareDesc

OCTET STRING

read-only

This object indicates system hardware description of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.24

hwWlanApSysManufacture

OCTET STRING

read-only

This object indicates the manufacturer of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.25

hwWlanApSysSoftwareName

OCTET STRING

read-only

This object indicates the software name of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.26

hwWlanApSysSoftwareVendor

OCTET STRING

read-only

This object indicates the manufacturer of the AP software.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.27

hwWlanApBomCode

OCTET STRING

read-only

This object indicates the BOM code.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.33

hwWlanApBootCountTotal

Integer32

read-only

This object indicates the total number of times an AP is restarted.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.34

hwWlanApBootCountPowerOff

Integer32

read-only

This object indicates the number of times an AP is restarted due to a power failure.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.35

hwWlanApBootCountClear

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object clears the AP restart count.

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

Only the write operation is supported.

1.3.6.1.4.1.2011.6.139.13.3.3.1.36

hwWlanApElectronicLabel

OCTET STRING(0–3073)

read-only

This object indicates the electronic label of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.37

hwWlanApWiredPortNum

Integer32

read-only

This object indicates the total number of wired interfaces.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.39

hwWlanApWiredPortMac

MacAddress

read-only

This object indicates the MAC address of a wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.40

hwWlanApMemoryUseRate

Integer32

read-only

This object indicates the memory usage.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.41

hwWlanApCpuUseRate

Integer32

read-only

This object indicates the CPU usage.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.43

hwWlanApTemperature

Integer32

read-only

This object indicates the device temperature.

Unit: °C

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.44

hwWlanApOnlineUserNum

Integer32

read-only

This object indicates the number of online users.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.45

hwWlanApDualBandAssoc5gStaNum

Unsigned32

read-only

This object indicates the number of dual-band terminals that access the 5 GHz radio.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.46

hwWlanApDualBandStaNum

Unsigned32

read-only

This object indicates the number of STAs that support dual frequency bands.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.47

hwWlanApStaOnlineFailRatio

Unsigned32

read-only

This object indicates STA online failure ratio on an AP.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.48

hwWlanApStaOfflineRatio

Unsigned32

read-only

This object indicates STA offline ratio of an AP.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.49

hwWlanApStickyClientRatio

Unsigned32

read-only

This object indicates the proportion of sticky STAs to all STAs.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.54

hwWlanApUpPortSpeed

Integer32

read-only

This object indicates the real-time rate of an upstream interface.

Unit: Mbit/s

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.55

hwWlanAPUpPortPER

Integer32

read-only

This object indicates the packet error rate of an upstream interface.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.56

hwWlanEthportUpRate

Integer32

read-only

This object indicates the upstream rate of an Ethernet interface.

Unit: kbit/s

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.57

hwWlanEthportDownRate

Integer32

read-only

This object indicates the downstream rate of an Ethernet interface.

Unit: kbit/s

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.58

hwWlanApAirportUpTraffic

OCTET STRING

read-only

This object indicates the traffic volume on an upstream wireless interface.

Unit: Bytes

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.59

hwWlanApAirportDwTraffic

OCTET STRING

read-only

This object indicates the traffic volume on a downstream wireless interface.

Unit: Bytes

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.60

hwWlanApEthportDwTraffic

OCTET STRING

read-only

This object indicates the traffic volume on a downstream wired interface.

Unit: Bytes

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.61

hwWlanApEthportUpTraffic

OCTET STRING

read-only

This object indicates the traffic volume on an upstream wired interface.

Unit: Bytes

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.62

hwWlanApUpPortRecvPackets

Counter64

read-only

This object indicates the total number of frames received on an upstream interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.63

hwWlanApUpPortSendPackets

Counter64

read-only

This object indicates the total number of frames sent on an upstream interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.64

hwWlanApRowstatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.65

hwWlanApUpPortRecvBytes

Counter64

read-only

This object indicates the total number of bytes received on an upstream interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.66

hwWlanApUpPortSendBytes

Counter64

read-only

This object indicates the total number of bytes sent on an upstream interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.67

hwWlanApId

Unsigned32

read-only

This object indicates the AP ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.68

hwWlanCentralApId

INTEGER

read-only

This object indicates the central AP's ID.

This object is supported only by RUs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.69

hwWlanCentralApMac

MacAddress

read-only

This object indicates the central AP's MAC address.

This object is supported only by RUs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.70

hwWlanCentralApName

OCTET STRING

read-only

This object indicates the central AP's name.

This object is supported only by RUs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.71

hwWlanApSDCardSize

Integer32

read-only

This object indicates the SD card size of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.72

hwWlanAPLongitude

OCTET STRING

read-only

This object indicates the longitude of the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.73

hwWlanAPLatitude

OCTET STRING

read-only

This object indicates the latitude of the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.74

hwWlanApTotalOnlineTime

Unsigned32

read-only

This object indicates the total online duration of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.75

hwWlanApDiscoverTime

Unsigned32

read-only

This object indicates the total duration since an AP went online for the first time.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.76

hwWlanAPPoeWorkmode

INTEGER{af(1),at(2),bt(3),invalid(4)}

read-only

This object indicates the PoE working mode of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.77

hwWlanAPPoeExpectedWorkmode

INTEGER{af(1),at(2),bt(3),invalid(4)}

read-only

This object indicates the expected PoE working mode of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.78

hwWlanAPStaOnlineFailStatistics

OCTET STRING(0-1500)

read-only

This object indicates the statistics on STA going-online failure reasons.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.79

hwWlanAPStaOfflineStatistics

OCTET STRING(0-1500)

read-only

This object indicates the statistics on STA going-offline reasons.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.80

hwWlanAPPowerSupplyState

INTEGER{full(1),disabled(2),limited(3),invalid(4)}

read-only

This object indicates the power supply status.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.81

hwWlanApDataLinkState

INTEGER {down(1), run(2), noneed(3)}

read-only

This object indicates the link status.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.82

hwWlanApEnvironmentTemperature

Integer32

read-only

This object indicates the ambient temperature.

Unit: °C

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.83

hwWlanApCpuTemperature

Integer32

read-only

This object indicates the CPU temperature.

Unit: °C

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.84

hwWlanApNpTemperature

Integer32

read-only

This object indicates the NP chip temperature.

Unit: °C

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.4.1.1

hwWlanApWiredPortIndex

Integer32

not-accessible

This object indicates the index of an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.4.1.2

hwWlanApWiredPortType

INTEGER{fe(1),ge(2),gpon(3),epon(4),adsl2plus(5),trunk(6),multige(7),xge(8)}

read-only

This object indicates the type of an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.4.1.3

hwWlanApWiredPortDesc

OCTET STRING

read-only

This object indicates description of an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.4.1.4

hwWlanApWiredPortState

INTEGER{down(1),up(2),unknown(-1)}

read-only

This object indicates status of an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.4.1.5

hwWlanApWiredPortSpeed

Integer32

read-only

This object indicates the rate of an AP's wired interface.

Unit: Mbps

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.4.1.6

hwWlanApMultiWiredPortDuplex

INTEGER{half(1),full(2),unknown(-1)}

read-only

This object indicates the duplex state of an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.4.1.7

hwWlanApMultiWiredPortNegotiation

INTEGER{auto(1),forced(2),unknown(-1)}

read-only

This object indicates the auto-negotiation mode of an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.4.1.8

hwWlanApMultiWiredPortMode

INTEGER{root(1),endpoint(2),middle(3),null(256)}

read-only

This object indicates the working mode of an AP's wired interface.

Default value: is invalid.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.4.1.9

hwWlanApWiredPortApId

Unsigned32

read-only

This object indicates the AP ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.4.1.10

hwWlanApWiredPortApName

OCTET STRING

read-only

This object indicates the AP name.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.4.1.11

hwWlanApWiredPortTrunkID

Unsigned32

read-only

This object indicates the Eth-Trunk ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.4.1.12

hwWlanApWiredPortTrunkActiveFlag

INTEGER{disable(1),enable(2),invalid(3)}

read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.5.1.1

hwWlanApWiredPortStatClear

Integer32

read-write

This object clears interface statistics.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.5.1.3

hwWlanApWiredPortInPkts

Counter64

read-only

This object indicates the total number of frames received on an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.5.1.6

hwWlanApWiredPortInBytes

Counter64

read-only

This object indicates the number of bytes received on an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.5.1.7

hwWlanApWiredPortInErrorPkts

Counter64

read-only

This object indicates the number of error frames received on an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.5.1.8

hwWlanApWiredPortInDiscardPkts

Counter64

read-only

This object indicates the number of dropped frames received on an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.5.1.9

hwWlanApWiredPortOutPkts

Counter64

read-only

This object indicates the total number of frames sent on an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.5.1.12

hwWlanApWiredPortOutBytes

Counter64

read-only

This object indicates the number of bytes sent on an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.5.1.13

hwWlanApWiredPortOutErrorsPkts

Counter64

read-only

This object indicates the number of error packets sent on an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.5.1.14

hwWlanApWiredPortOutDiscardPkts

Counter64

read-only

This object indicates the number of dropped packets sent on an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.6.1.1

hwWlanApWiredPortLldpRemLocalPortNum

Integer32

not-accessible

This object indicates the local port number of the remote neighbor of the AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.6.1.2

hwWlanApWiredPortLldpRemIndex

Integer32

not-accessible

This object indicates the index of the remote neighbor interface of the AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.6.1.3

hwWlanApWiredPortLldpRemChassisIdSubtype

Integer32

read-only

This object indicates the subtype of the remote neighbor of the AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.6.1.4

hwWlanApWiredPortLldpRemChassisId

OCTET STRING

read-only

This object indicates the subtype ID of the remote neighbor of the AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.6.1.5

hwWlanApWiredPortLldpRemPortIdSubtype

Integer32

read-only

This object indicates the subtype of the remote neighbor interface of the AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.6.1.6

hwWlanApWiredPortLldpRemPortId

OCTET STRING

read-only

This object indicates the ID of the remote neighbor interface of the AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.6.1.7

hwWlanApWiredPortLldpRemPortDesc

OCTET STRING

read-only

This object indicates descriptions about the remote neighbor interface of the AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.6.1.8

hwWlanApWiredPortLldpRemSysName

OCTET STRING

read-only

This object indicates the system name of the remote neighbor of the AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.6.1.9

hwWlanApWiredPortLldpRemSysDesc

OCTET STRING

read-only

This object indicates system descriptions about the remote neighbor of the AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.6.1.10

hwWlanApWiredPortLldpRemSysCapSupported

Integer32

read-only

This object indicates whether the remote neighbor of the AP's wired interface supports the system capability.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.6.1.11

hwWlanApWiredPortLldpRemSysCapEnabled

Integer32

read-only

This object enables the system capability of the remote neighbor of the AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.6.1.12

hwWlanApWiredPortLldpRemLocalApId

Integer32

read-only

This object indicates the AP ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.7.1.1

hwWlanApWiredPortLldpRemManAddrSubtype

Integer32

not-accessible

This object indicates the remote management address subtype of the wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.7.1.2

hwWlanApWiredPortLldpRemManAddr

OCTET STRING

not-accessible

This object indicates the remote management address of the wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.7.1.3

hwWlanApWiredPortLldpRemManAddrIfSubtype

Integer32

read-only

This object indicates the interface subtype of the remote management address of the wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.7.1.4

hwWlanApWiredPortLldpRemManAddrIfId

Integer32

read-only

This object indicates the interface ID of the remote management address of the wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.7.1.5

hwWlanApWiredPortLldpRemManAddrOID

OCTET STRING

read-only

This object indicates the remote management address OID of the wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.8.1.1

hwWlanApOnlineFailMac

MacAddress

not-accessible

This object indicates the MAC address of an AP that fails to go online.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.8.1.2

hwWlanApOnlineFailTime

OCTET STRING

read-only

This object indicates the last time when an AP failed to go online.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.8.1.3

hwWlanApOnlineFailReason

OCTET STRING

read-only

This object indicates the reason why an AP failed to go online last time.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.8.1.4

hwWlanApOnlineFailRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.8.1.5

hwWlanApOnlineFailInfo

OCTET STRING

read-only

This object indicates information about the last three online failures of an AP, including the failure time and reasons.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.9.1.1

hwWlanApOfflineMac

MacAddress

not-accessible

This object indicates the MAC address of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.9.1.2

hwWlanApOfflineTime

OCTET STRING

read-only

This object indicates the AP offline time.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.9.1.3

hwWlanApOfflineReason

OCTET STRING

read-only

This object indicates the AP offline reason.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.9.1.4

hwWlanApOfflineRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.9.1.5

hwWlanApOfflineInfo

OCTET STRING

read-only

This object indicates information about the last three offline records of an AP, including the offline time and reasons.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.1

hwWlanIDIndexedApId

Unsigned32

not-accessible

This object indicates the AP ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.2

hwWlanIDIndexedApMac

MacAddress

accessible-for-notify

This object indicates the MAC address of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.3

hwWlanIDIndexedApSn

OCTET STRING

read-only

This object indicates the sequence number (SN) of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.4

hwWlanIDIndexedApTypeInfo

OCTET STRING

read-only

This object indicates the AP type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.5

hwWlanIDIndexedApName

OCTET STRING

read-write

This object indicates the AP name.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.6

hwWlanIDIndexedApGroup

OCTET STRING

read-write

This object indicates the group to which an AP belongs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.7

hwWlanIDIndexedApRunState

INTEGER{idle(1),autofind(2),typeNotMatch(3),fault(4),config(5),configFailed(6),download(7),normal(8),committing(9),commitFailed(10),standby(11),verMismatch(12),nameConflicted(13),invalid(14),countryCodeMismatch(15)}

read-only

This object indicates the AP state.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.8

hwWlanIDIndexedApSoftwareVersion

OCTET STRING

read-only

This object indicates the AP software version.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.9

hwWlanIDIndexedApHardwareVersion

OCTET STRING

read-only

This object indicates the AP hardware version.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.10

hwWlanIDIndexedApCpuType

OCTET STRING

read-only

This object indicates the CPU type of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.11

hwWlanIDIndexedApCpufrequency

Integer32

read-only

This object indicates the CPU frequency of an AP.

Unit: MHz

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.12

hwWlanIDIndexedApMemoryType

OCTET STRING

read-only

This object indicates the memory type of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.13

hwWlanIDIndexedApDomain

OCTET STRING

read-only

This object indicates the AP domain.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.14

hwWlanIDIndexedApIpAddress

IpAddress

read-only

This object indicates the IP address of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.15

hwWlanIDIndexedApIpNetMask

IpAddress

read-only

This object indicates the IP address mask of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.16

hwWlanIDIndexedApGatewayIp

IpAddress

read-only

This object indicates the gateway IP address of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.17

hwWlanIDIndexedApMemorySize

Integer32

read-only

This object indicates the memory size of an AP.

Unit: MB

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.18

hwWlanIDIndexedApFlashSize

Integer32

read-only

This object indicates the flash memory size of an AP.

Unit: MB

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.19

hwWlanIDIndexedApRunTime

Unsigned32

read-only

This object indicates the running time of an AP.

Unit: tick

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.20

hwWlanIDIndexedApAdminOper

INTEGER{reset(1),confirm(2),manufacturerConfig(3)}

read-create

This object indicates administrative status of an AP.

Only the write operation is supported. The read operation is not supported.

1.3.6.1.4.1.2011.6.139.13.3.10.1.21

hwWlanIDIndexedApDNS

IpAddress

read-only

This object indicates the AP DNS.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.22

hwWlanIDIndexedApOnlineTime

Unsigned32

read-only

This object indicates online duration of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.23

hwWlanIDIndexedApSysSoftwareDesc

OCTET STRING

read-only

This object indicates system software description of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.24

hwWlanIDIndexedApSysHardtwareDesc

OCTET STRING

read-only

This object indicates system hardware description of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.25

hwWlanIDIndexedApSysManufacture

OCTET STRING

read-only

This object indicates the manufacturer of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.26

hwWlanIDIndexedApSysSoftwareName

OCTET STRING

read-only

This object indicates the software name of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.27

hwWlanIDIndexedApSysSoftwareVendor

OCTET STRING

read-only

This object indicates the manufacturer of the AP software.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.28

hwWlanIDIndexedApBomCode

OCTET STRING

read-only

This object indicates the BOM code.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.34

hwWlanIDIndexedApBootCountTotal

Integer32

read-only

This object indicates the total number of times an AP is restarted.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.35

hwWlanIDIndexedApBootCountPowerOff

Integer32

read-only

This object indicates the number of times an AP is restarted due to power failures.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.36

hwWlanIDIndexedApBootCountClear

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object clears the AP restart count.

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

Only the write operation is supported.

1.3.6.1.4.1.2011.6.139.13.3.10.1.37

hwWlanIDIndexedApElectronicLabel

OCTET STRING(0–3073)

read-only

This object indicates the electronic label of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.38

hwWlanIDIndexedApWiredPortNum

Integer32

read-only

This object indicates the total number of wired interfaces.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.40

hwWlanIDIndexedApWiredPortMac

MacAddress

read-only

This object indicates the MAC address of a wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.41

hwWlanIDIndexedApMemoryUseRate

Integer32

read-only

This object indicates the memory usage.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.42

hwWlanIDIndexedApCpuUseRate

Integer32

read-only

This object indicates the CPU usage.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.44

hwWlanIDIndexedApTemperature

Integer32

read-only

This object indicates the device temperature.

Unit: °C

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.45

hwWlanIDIndexedApOnlineUserNum

Integer32

read-only

This object indicates the number of online users.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.46

hwWlanIDIndexedApDualBandAssoc5gStaNum

Unsigned32

read-only

This object indicates the number of dual-band terminals that access the 5 GHz radio.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.47

hwWlanIDIndexedApDualBandStaNum

Unsigned32

read-only

This object indicates the number of STAs that support dual frequency bands.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.48

hwWlanIDIndexedApStaOnlineFailRatio

Unsigned32

read-only

This object indicates the STA online failure ratio of an AP.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.49

hwWlanIDIndexedApStaOfflineRatio

Unsigned32

read-only

This object indicates the STA offline ratio of an AP.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.50

hwWlanIDIndexedApStickyClientRatio

Unsigned32

read-only

This object indicates the proportion of sticky STAs to all STAs.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.55

hwWlanIDIndexedApUpPortSpeed

Integer32

read-only

This object indicates the real-time rate of an upstream interface.

Unit: Mbit/s

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.56

hwWlanIDIndexedAPUpPortPER

Integer32

read-only

This object indicates the packet error rate of an upstream interface.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.57

hwWlanIDIndexedEthportUpRate

Integer32

read-only

This object indicates the upstream rate of an Ethernet interface.

Unit: kbit/s

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.58

hwWlanIDIndexedEthportDownRate

Integer32

read-only

This object indicates the downstream rate of an Ethernet interface.

Unit: kbit/s

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.59

hwWlanIDIndexedApAirportUpTraffic

OCTET STRING

read-only

This object indicates the traffic volume on an upstream wireless interface.

Unit: Bytes

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.60

hwWlanIDIndexedApAirportDwTraffic

OCTET STRING

read-only

This object indicates the traffic volume on a downstream wireless interface.

Unit: Bytes

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.61

hwWlanIDIndexedApEthportDwTraffic

OCTET STRING

read-only

This object indicates the traffic volume on a downstream wired interface.

Unit: Bytes

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.62

hwWlanIDIndexedApEthportUpTraffic

OCTET STRING

read-only

This object indicates the traffic volume on an upstream wired interface.

Unit: Bytes

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.63

hwWlanIDIndexedApUpPortRecvPackets

Counter64

read-only

This object indicates the total number of frames received on an upstream interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.64

hwWlanIDIndexedApUpPortSendPackets

Counter64

read-only

This object indicates the total number of frames sent on an upstream interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.65

hwWlanIDIndexedApUpPortRecvBytes

Counter64

read-only

This object indicates the total number of bytes received on an upstream interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.66

hwWlanIDIndexedApUpPortSendBytes

Counter64

read-only

This object indicates the total number of bytes sent on an upstream interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.70

hwWlanIDIndexedApRowstatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.71

hwWlanIDIndexedApSDCardSize

Integer32

read-only

This object indicates the SD card size of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.72

hwWlanIDIndexedAPLongitude

OCTET STRING

read-only

This object indicates the longitude of the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.73

hwWlanIDIndexedAPLatitude

OCTET STRING

read-only

This object indicates the latitude of the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.74

hwWlanIDIndexedAPUUIDString

OCTET STRING(0–16)

read-write

This object indicates the UUID field in a string of characters in BLE broadcast frames.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.75

hwWlanIDIndexedAPUUIDHex

OCTET STRING(0–32)

read-write

This object indicates the UUID field (in hexadecimal notation) in BLE broadcast frames.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.76

hwWlanIDIndexedApChannelLoadMode

INTEGER{indoor(1),outdoor(2),outToindoor(3)}

read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.77

hwWlanIDIndexedAPPoeWorkmode

INTEGER{af(1),at(2),bt(3),invalid(4)}

read-only

This object indicates the PoE working mode of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.78

hwWlanIDIndexedAPPoeExpectedWorkmode

INTEGER{af(1),at(2),bt(3),invalid(4)}

read-only

This object indicates the expected PoE working mode of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.79

hwWlanIDIndexedApTotalOnlineTime

Unsigned32

read-only

This object indicates the total online duration of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.80

hwWlanIDIndexedApDiscoverTime

Unsigned32

read-only

This object indicates the total duration since an AP went online for the first time.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.87

hwWlanIDIndexedAPPowerSupplyState

INTEGER{full(1),disabled(2),limited(3),invalid(4)}

read-only

This object indicates the power supply status of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.88

hwWlanIDIndexedApMajorString

OCTET STRING[0,2]

read-write

This object indicates the Major field (character string type) in BLE broadcast frames. By default, the value is null.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.89

hwWlanIDIndexedApMajorHex

OCTET STRING[0,4]

read-write

This object indicates the Major field (in hexadecimal notation) in BLE broadcast frames. By default, the field is null.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.90

hwWlanIDIndexedApMajorDecimal

Integer32[-1,65535]

read-write

This object indicates the Major field (integer type) in BLE broadcast frames. By default, the field is null.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.91

hwWlanIDIndexedApMinorString

OCTET STRING[0,2]

read-write

This object indicates the Minor field (character string type) in BLE broadcast frames. By default, the field is null.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.92

hwWlanIDIndexedApMinorHex

OCTET STRING[0,4]

read-write

This object indicates the Minor field (in hexadecimal notation) in BLE broadcast frames. By default, the field is null.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.93

hwWlanIDIndexedApMinorDecimal

Integer32[-1,65535]

read-write

This object indicates the Minor field (integer type) in BLE broadcast frames. By default, the field is null.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.94

hwWlanIDIndexedApReferenceRSSI

Integer32[-97,-50],0

read-write

This object indicates the RSSI calibration value. By default, the value is null.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.95

hwWlanIDIndexedApEnvironmentTemperature

Integer32

read-only

This object indicates the ambient temperature.

Unit: °C

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.96

hwWlanIDIndexedApCpuTemperature

Integer32

read-only

This object indicates the CPU temperature.

Unit: °C

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.97

hwWlanIDIndexedApNpTemperature

Integer32

read-only

This object indicates the NP chip temperature.

Unit: °C

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.99

hwWlanIDIndexedApDataLinkState

Enum {down(1), run(2), noneed(3)}

read-only

This object indicates the link status.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.100

hwWlanIDIndexedApRtuStatus

INTEGER{downloading(1), active(2), notActive(3), invalidLicense(4), flashMemoryNotEnough(5), notSupport(6), noLicenseOnAP(7), noLicenseOnAC(8), invalidStatus(255)}

read-only

This object indicates the RTU license loading status on the APs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.11.1.1

hwWlanApOnlineFailReasonIndex

Integer32

not-accessible

This object indicates the index of an AP online failure reason.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.11.1.2

hwWlanApOnlineFailReasonDesc

OCTET STRING

read-only

This object indicates the description of an AP online failure reason.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.11.1.3

hwWlanApOnlineFailReasonCount

Integer32

read-only

This object indicates the count of AP online failure reasons.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.12.1.1

hwWlanApOfflineReasonIndex

Integer32

not-accessible

This object indicates the index of an AP offline reason.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.12.1.2

hwWlanApOfflineReasonDesc

OCTET STRING

read-only

This object indicates the description of an AP offline reason.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.12.1.3

hwWlanApOfflineReasonCount

Integer32

read-only

This object indicates the count of AP offline reasons.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.1.1.1

hwApFaultTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApActualType: AP type, OCTET STRING
• hwWlanApName: AP name, OCTET STRING
• hwWlanApFaultTimes: number of AP failures, Integer32
• hwWlanApId: AP ID, Unsigned32

The object indicates an AP communication fault alarm.

current

1.3.6.1.4.1.2011.6.139.13.1.1.2

hwApNormalTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApActualType: AP type, OCTET STRING
• hwWlanApName: AP name, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates an AP communication fault clear alarm.

current

1.3.6.1.4.1.2011.6.139.13.1.1.3

hwApPingResultTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApActualType: AP type, OCTET STRING
• hwWlanApName: AP name, OCTET STRING
• hwWlanApPingResultSuccessCount: the number of successful AP ping operations, Integer32
• hwWlanApPingResultFailureCount: the number of AP ping operation failures, Integer32
• hwWlanApPingResultAveResponseTime: the average response time for an AP ping operation, Integer32
• hwWlanApPingResultMinResponseTime: the minimum response time for an AP ping operation, Integer32
• hwWlanApPingResultMaxResponseTime: the maximum response time for an AP ping operation, Integer32
• hwWlanApId: AP ID, Unsigned32

This object indicates an AP ping result alarm.

current

1.3.6.1.4.1.2011.6.139.13.1.1.4

hwApConfigCommitTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates that the configuration of an AP is successfully committed.

current

1.3.6.1.4.1.2011.6.139.13.1.1.5

hwUnAuthorizedApRecordExistTrap

hwWlanApUnAuthorizedApRecordNumber: number of APs failing authentication, Integer32

This object indicates that unauthorized AP alarms exist.

current

1.3.6.1.4.1.2011.6.139.13.1.1.6

hwUnAuthorizedApRecordClearTrap

hwWlanApUnAuthorizedApRecordNumber: number of APs failing authentication, Integer32

This object indicates that unauthorized AP alarms are cleared.

current

1.3.6.1.4.1.2011.6.139.13.1.1.7

hwApCpuOverloadTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApCpuOccupancyRate: AP CPU usage, Integer32
• hwWlanApCpuOverloadDescInfo: description about the high AP CPU usage
• hwWlanApId: AP ID, Unsigned32

This object indicates that the CPU usage of an AP exceeds the upper threshold.

current

1.3.6.1.4.1.2011.6.139.13.1.1.8

hwApCpuOverloadRestoreTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApCpuOccupancyRate: AP CPU usage, Integer32
• hwWlanApId: AP ID, Unsigned32

This object indicates that an AP's CPU usage restores to the allowed range.

current

1.3.6.1.4.1.2011.6.139.13.1.1.9

hwApMemoryOverloadTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApMemoryOccupancyRate: AP memory usage, Integer32
• hwWlanApId: AP ID, Unsigned32

This object indicates that the memory usage of an AP exceeds the upper threshold.

current

1.3.6.1.4.1.2011.6.139.13.1.1.10

hwApMemoryOverloadRestoreTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApMemoryOccupancyRate: AP memory usage, Integer32
• hwWlanApId: AP ID, Unsigned32

This object indicates that the memory usage of an AP restores to the allowed range.

current

1.3.6.1.4.1.2011.6.139.13.1.1.11

hwApStaFullTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanStaAuthFailCause: cause of the STA authentication failure, Integer32
• hwWlanApPermitStaNum: number of STAs allowed to associate with an AP, Integer32
• hwWlanApId: AP ID, Unsigned32

This object indicates that new STAs cannot associate with an AP.

current

1.3.6.1.4.1.2011.6.139.13.1.1.12

hwApStaFullRecoverTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanStaAuthFailCause: cause of the STA authentication failure, Integer32
• hwWlanApPermitStaNum: number of STAs allowed to associate with an AP, Integer32
• hwWlanApId: AP ID, Unsigned32

This object indicates that new STAs can associate with an AP.

current

1.3.6.1.4.1.2011.6.139.13.1.1.13

hwAcDevicesSwitchTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApSn: AP SN, OCTET STRING
• hwWlanAcSystemSwitchType: active/standby switchover type, Integer32
• hwWlanApId: AP ID, Unsigned32

This object that an active/standby AC switchover occurs.

current

1.3.6.1.4.1.2011.6.139.13.1.1.14

hwDyingGaspTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates a dying gasp alarm.

current

1.3.6.1.4.1.2011.6.139.13.1.1.17

hwApTemperatureTooLowTrap

• hwWlanApMac: AP MAC address. The value type is MacAddress.
• hwWlanApName: AP name. The value type is OCTET STRING.
• hwWlanApNotifyOrRestoreTemperature: AP temperature. The value type is Integer32.
• hwWlanApId: AP ID. The value type is Unsigned32.

This object indicates that the AP temperature is too low.

current

1.3.6.1.4.1.2011.6.139.13.1.1.18

hwApTemperatureTooLowRestoreTrap

• hwWlanApMac: AP MAC address. The value type is MacAddress.
• hwWlanApName: AP name. The value type is OCTET STRING.
• hwWlanApNotifyOrRestoreTemperature: AP temperature. The value type is Integer32.
• hwWlanApId: AP ID. The value type is Unsigned32.
• hwWlanApTemperatureType: temperature type. The value type is OCTET STRING.

This object indicates that the AP low temperature alarm is cleared.

current

1.3.6.1.4.1.2011.6.139.13.1.1.19

hwApTemperatureTooHighTrap

• hwWlanApMac: AP MAC address. The value type is MacAddress.
• hwWlanApName: AP name. The value type is OCTET STRING.
• hwWlanApNotifyOrRestoreTemperature: AP temperature. The value type is Integer32.
• hwWlanApId: AP ID. The value type is Unsigned32.
• hwWlanApTemperatureType: temperature type. The value type is OCTET STRING.

This object indicates that the AP temperature is too high.

current

1.3.6.1.4.1.2011.6.139.13.1.1.20

hwApTemperatureTooHighRestoreTrap

• hwWlanApMac: AP MAC address. The value type is MacAddress.
• hwWlanApName: AP name. The value type is OCTET STRING.
• hwWlanApNotifyOrRestoreTemperature: AP temperature. The value type is Integer32.
• hwWlanApId: AP ID. The value type is Unsigned32.
• hwWlanApTemperatureType: temperature type. The value type is OCTET STRING.

This object indicates that the AP high temperature alarm is cleared.

current

1.3.6.1.4.1.2011.6.139.13.1.1.21

hwApOpticalRxPowerTooHighTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApIfIndex: AP interface index, INTEGER
• hwWlanApOpticalRxPower: receive power of an AP's optical module, Integer32
• hwApEntityPhysicalName: name of the AP's interface, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates that the receive power of an AP's optical module is too high.

current

1.3.6.1.4.1.2011.6.139.13.1.1.22

hwApOpticalRxPowerTooHighRestoreTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApIfIndex: AP interface index, INTEGER
• hwWlanApOpticalRxPower: receive power of an AP's optical module, Integer32
• hwApEntityPhysicalName: name of the AP's interface, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates that the receive power of an AP's optical module restores to the normal range.

current

1.3.6.1.4.1.2011.6.139.13.1.1.23

hwApOpticalRxPowerTooLowTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApIfIndex: AP interface index, INTEGER
• hwWlanApOpticalRxPower: receive power of an AP's optical module, Integer32
• hwApEntityPhysicalName: name of the AP's interface, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates that the receive power of an AP's optical module is too low.

current

1.3.6.1.4.1.2011.6.139.13.1.1.24

hwApOpticalRxPowerTooLowRestoreTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApIfIndex: AP interface index, INTEGER
• hwWlanApOpticalRxPower: receive power of an AP's optical module, Integer32
• hwApEntityPhysicalName: name of the AP's interface, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates that the receive power of an AP's optical module restores to the normal range.

current

1.3.6.1.4.1.2011.6.139.13.1.1.25

hwApOpticalTemperatureTooHighTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApIfIndex: AP interface index, INTEGER
• hwWlanApOpticalTemperature: temperature of an AP's optical module, Integer32
• hwApEntityPhysicalName: name of the AP's interface, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates that the temperature of an AP's optical module is too high.

current

1.3.6.1.4.1.2011.6.139.13.1.1.26

hwApOpticalTemperatureTooHighRestoreTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApIfIndex: AP interface index, INTEGER
• hwWlanApOpticalTemperature: temperature of an AP's optical module, Integer32
• hwApEntityPhysicalName: name of the AP's interface, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates that the temperature of an AP's optical module restores to the normal range.

current

1.3.6.1.4.1.2011.6.139.13.1.1.27

hwApOpticalTemperatureTooLowTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApIfIndex: AP interface index, INTEGER
• hwWlanApOpticalTemperature: temperature of an AP's optical module, Integer32
• hwApEntityPhysicalName: name of the AP's interface, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates that the temperature of an AP's optical module is too low.

current

1.3.6.1.4.1.2011.6.139.13.1.1.28

hwApOpticalTemperatureTooLowRestoreTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApIfIndex: AP interface index, INTEGER
• hwWlanApOpticalTemperature: temperature of an AP's optical module, Integer32
• hwApEntityPhysicalName: name of the AP's interface, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates that the temperature of an AP's optical module restores to the normal range.

current

1.3.6.1.4.1.2011.6.139.13.1.1.29

hwApNotSupportCountryCodeTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApCfgCountryCode: AP country code, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates that the country code is not supported.

current

1.3.6.1.4.1.2011.6.139.13.1.1.30

hwApColdBootTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApActualType: AP type, OCTET STRING
• hwWlanApName: AP name, OCTET STRING
• hwWlanOccurTime: occurrence time, OCTET STRING
• hwWlanApBootNotifyName: AP restart alarm name, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates a cold restart alarm.

current

1.3.6.1.4.1.2011.6.139.13.1.1.31

hwApColdBootRestoreTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApActualType: AP type, OCTET STRING
• hwWlanApName: AP name, OCTET STRING
• hwWlanOccurTime: occurrence time, OCTET STRING
• hwWlanApBootNotifyName: AP restart alarm name, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates a cold restart restore alarm.

current

1.3.6.1.4.1.2011.6.139.13.1.1.32

hwApHotBootTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApActualType: AP type, OCTET STRING
• hwWlanApName: AP name, OCTET STRING
• hwWlanOccurTime: occurrence time, OCTET STRING
• hwWlanApBootNotifyName: AP restart alarm name, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates a hot restart alarm.

current

1.3.6.1.4.1.2011.6.139.13.1.1.33

hwApHotBootRestoreTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApActualType: AP type, OCTET STRING
• hwWlanApName: AP name, OCTET STRING
• hwWlanOccurTime: occurrence time, OCTET STRING
• hwWlanApBootNotifyName: AP restart alarm name, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates a hot restart restore alarm.

current

1.3.6.1.4.1.2011.6.139.13.1.1.34

hwApCRCTooHighTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanCrcErrActual: CRC error value, Unsigned32
• hwWlanCrcPortType: CRC port type, OCTET STRING
• hwWlanCrcPortID: CRC port number, Integer32
• hwWlanApId: AP ID, Unsigned32

This object indicates a CRC error alarm.

current

1.3.6.1.4.1.2011.6.139.13.1.1.35

hwApCRCTooHighRestoreTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanCrcErrActual: actual CRC error value, Unsigned32
• hwWlanCrcPortType: CRC port type, OCTET STRING
• hwWlanCrcPortID: CRC port ID, Integer32
• hwWlanApId: AP ID, Unsigned32

This object indicates that CRC error alarms are cleared.

current

1.3.6.1.4.1.2011.6.139.13.1.1.36

hwApConflictApNameTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanOccurTime: occurrence time, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates an alarm of AP name conflict.

current

1.3.6.1.4.1.2011.6.139.13.1.1.37

hwApLicenseTrap

hwWlanApLicenseInfo: license information of APs, OCTET STRING

This object indicates an AP license resource exhaustion alarm.

current

1.3.6.1.4.1.2011.6.139.13.1.1.38

hwApFmeaIICFaultTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates an FMEA IIC fault alarm.

current

1.3.6.1.4.1.2011.6.139.13.1.1.39

hwApFmeaIICFaultRestoreTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates that the FMEA IIC fault alarm is cleared.

current

1.3.6.1.4.1.2011.6.139.13.1.1.40

hwApFmeaPHYFaultTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates an FMEA PHY fault alarm.

current

1.3.6.1.4.1.2011.6.139.13.1.1.41

hwApFmeaPHYFaultRestoreTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates that the FMEA PHY fault alarm is cleared.

current

1.3.6.1.4.1.2011.6.139.13.1.1.42

hwApFmeaFaultTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApFaultID: AP fault index, INTEGER
• hwWlanApIfIndex: port of an AP, INTEGER
• hwWlanApFaultInfo: AP fault description, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates an FMEA fault alarm.

current

1.3.6.1.4.1.2011.6.139.13.1.1.43

hwApFmeaFaultRestoreTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApFaultID: AP fault index, INTEGER
• hwWlanApIfIndex: port of an AP, INTEGER
• hwWlanApFaultInfo: AP fault description, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates that the FMEA fault alarm is cleared.

current

1.3.6.1.4.1.2011.6.139.13.1.1.44

hwApOpticalInsertTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApIfIndex: AP interface index, INTEGER
• hwApEntityPhysicalName: name of the AP's interface, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates an alarm that is generated when an optical module is installed.

current

1.3.6.1.4.1.2011.6.139.13.1.1.45

hwApOpticalRemoveTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApIfIndex: AP interface index, INTEGER
• hwApEntityPhysicalName: name of the AP's interface, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates an alarm generated due to installation of an optical module is cleared.

current

1.3.6.1.4.1.2011.6.139.13.1.1.46

hwApOpticalRemoveTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApNotifyRadioId: Radio ID used to report alarms, Integer32
• hwWlanApNotifyWlanId: WLAN ID used to report alarms, Integer32
• hwWlanApArpAttackDropNum: number of packets discarded due to ARP attacks, Integer32
• hwWlanApId: AP ID, Unsigned32

This object indicates that invalid ARP packets are received.

current

1.3.6.1.4.1.2011.6.139.13.1.1.47

hwApVersionMismatchTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApActualType: AP type, OCTET STRING
• hwWlanApSoftwareVersion: AP software version, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates that the AP version and the AC version do not match.

current

1.3.6.1.4.1.2011.6.139.13.1.1.48

hwRadioUploadRemoteCaptureFileTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApRadioID: radio ID, Integer32
• hwRadioUploadRemoteCaptureResult: remote capture result, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates the alarm on the remote capture result upload result.

current

1.3.6.1.4.1.2011.6.139.13.1.1.57

hwApOnLineNumExceedCardSpecTrap

• hwWlanSlotNum: slot ID, OCTET STRING

The number of APs going online on the card has exceeded the maximum.

current

1.3.6.1.4.1.2011.6.139.13.1.1.76

hwWlanBLELowPowerTrap

• hwWlanBLEMacAddr: MAC address of a BLE device. The value type is MacAddress.

This object indicates that the battery power of a BLE device is lower than the specified low power alarm threshold.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.1.1.77

hwWlanBLELowPowerRestoreTrap

• hwWlanBLEMacAddr: MAC address of a BLE device. The value type is MacAddress.

This object indicates that the low power alarm of a BLE device has been cleared.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.1.1.78

hwWlanBLEOfflineTrap

• hwWlanBLEMacAddr: MAC address of a BLE device. The value type is MacAddress.

This object indicates that a BLE device gets offline.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.1.1.79

hwWlanBLEOfflineRestoreTrap

• hwWlanBLEMacAddr: MAC address of a BLE device. The value type is MacAddress.

This object indicates that an offline alarm of a BLE device has been cleared.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.1.1.80

hwWlanBLEFaultyTrap

• hwWlanApMac: MAC address of an AP. The value type is MacAddress.
• hwWlanApName: AP name. The value type is OCTET STRING.
• hwWlanApId: AP ID. The value type is Unsigned32.

This object indicates that an AP's built-in Bluetooth module is faulty.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.1.1.81

hwWlanBLEFaultyRestoreTrap

• hwWlanApMac: MAC address of an AP. The value type is MacAddress.
• hwWlanApName: AP name. The value type is OCTET STRING.
• hwWlanApId: AP ID. The value type is Unsigned32.

This object indicates that the fault on an AP's built-in Bluetooth module fault alarm is cleared.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.1.1.82

hwAPIoTCardInsertTrap

• hwWlanApMac: MAC address of an AP. The value type is MacAddress.
• hwWlanApName: AP name. The value type is OCTET STRING.
• hwWlanApIotCardId: Number of the slot on an AP where an IoT card is installed. The value type is Unsigned32.
• hwWlanApId: AP ID. The value type is Unsigned32.
• hwWlanApIotCardType: IoT card type. The value type is OCTET STRING.

This object indicates that an IoT card is inserted.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.1.1.83

hwAPIoTCardRemoveTrap

• hwWlanApMac: MAC address of an AP. The value type is MacAddress.
• hwWlanApName: AP name. The value type is OCTET STRING.
• hwWlanApIotCardId: Number of the slot on an AP where an IoT card is installed. The value type is Unsigned32.
• hwWlanApId: AP ID. The value type is Unsigned32.
• hwWlanApIotCardType: IoT card type. The value type is OCTET STRING.

This object indicates that an IoT card is removed.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.1.1.84

hwAPIoTServerStartFailTrap

• hwWlanApMac: MAC address of an AP. The value type is MacAddress.
• hwWlanApName: AP name. The value type is OCTET STRING.
• hwWlanApIotCardId: Number of the slot on an AP where an IoT card is installed. The value type is Unsigned32.
• hwWlanApUdp: UDP port number. The value type is Unsigned32.
• hwWlanApId: AP ID. The value type is Unsigned32.

This object indicates that the server module on an AP for receiving data from the IoT card fails to start.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.1.1.85

hwAPIoTServerStartFailResumeTrap

• hwWlanApMac: MAC address of an AP. The value type is MacAddress.
• hwWlanApName: AP name. The value type is OCTET STRING.
• hwWlanApIotCardId:Number of the slot on an AP where an IoT card is installed. The value type is Unsigned32.
• hwWlanApUdp:UDP port number. The value type is Unsigned32.
• hwWlanApId: AP ID. The value type is Unsigned32.

This object indicates that the server used by the IoT card is successfully recovered.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.1.1.88

hwApConfigInconsistWithActualTrap

• hwWlanApMac: AP MAC address. The value type is MacAddress.
• hwWlanApName: AP name. The value type is OCTET STRING.
• hwWlanApId: AP ID. The value type is Unsigned32.
• hwWlanApConfig: AP configuration. The value type is Unsigned32.
• hwWlanApReason: Reason for inconsistency with the actual configuration. The value type is Unsigned32.

The AP configuration is inconsistent with the actual configuration.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.1.1.89

hwWlanBLEDetachedTrap

hwWlanBLEMacAddr: MAC address of a Bluetooth device. The value type is MacAddress.

This object indicates an alarm showing that a Bluetooth tag is detached.

This object is implemented as defined in the corresponding MIB file.