HUAWEI-RM-EXT-MIB

1.3.6.1.4.1.2011.5.25.145.5.1

hwTnlDestination

OCTET STRING (SIZE (4))

accessible-for-notify

The destination of the tunnel group.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.5.2

hwTnlPolicy

OctetString min: 1 max: 39

accessible-for-notify

Tunnel policy name.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.8.1

hwCurIpv4PrefixNum

INTEGER (0..4294967295)

accessible-for-notify

The current number of IPv4 prefixes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.8.2

hwIpv4PrefixLimitValue

INTEGER (0..4294967295)

accessible-for-notify

The maximum number of IPv4 prefixes can be added.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.9.1

hwCurIpv6PrefixNum

INTEGER (0..4294967295)

accessible-for-notify

The current number of IPv6 prefixes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.9.2

hwIpv6PrefixLimitValue

INTEGER (0..4294967295)

accessible-for-notify

The maximum number of IPv6 prefixes can be added.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.9.3

hwIpv6PrefixLimitVpnName

STRING (SIZE (0..31))

accessible-for-notify

This object indicates the name of an IPv6 VPN instance in which route prefixes are limited.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.145.1.2.1.1

hwRouteStatVpnName

OCTET STRING (SIZE (0..31))

Not-accessible

The name of the VPN instance for static routes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.2.1.2

hwRouteStatProtocolId

INTEGER{direct(1),static(2),ospf(3),isis(6),rip(7),bgp(8)}

Not-accessible

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.2.1.3

hwRouteStatTotal

Unsigned32

Read-only

Total number of routes of a protocol.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.2.1.4

hwRouteStatActive

Unsigned32

Read-only

Total number of active routes of a protocol.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.2.1.5

hwRouteStatAdded

Unsigned32

Read-only

Total number of added routes of a protocol.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.2.1.6

hwRouteStatDeleted

INTEGER (0..4294967295)

Read-only

Total number of deleted routes of a protocol.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.2.1.7

hwRouteStatFreed

INTEGER (0..4294967295)

Read-only

Total number of released routes of a protocol.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.3.1.1

hwIpv6RouteStatVpnName

OCTET STRING (SIZE (0..31))

Not-accessible

The name of the IPv6 VPN instance for static routes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.3.1.2

hwIpv6RouteStatProtocolId

INTEGER{direct(1),static(2),ospf(3),isis(6),rip(7),bgp(8)}

Not-accessible

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.3.1.3

hwIpv6RouteStatTotal

Unsigned32

Read-only

Total number of routes of a protocol.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.3.1.4

hwIpv6RouteStatActive

Unsigned32

Read-only

Total number of active routes of a protocol.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.3.1.5

hwIpv6RouteStatAdded

Unsigned32

Read-only

Total number of added routes of a protocol.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.3.1.6

hwIpv6RouteStatDeleted

INTEGER (0..4294967295)

Read-only

Total number of deleted routes of a protocol.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.3.1.7

hwIpv6RouteStatFreed

INTEGER (0..4294967295)

Read-only

Total number of released routes of a protocol.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.4.1.1

hwStaticRouteSourceVpnNameExt

OCTET STRING (SIZE (0..31))

Not-accessible

The name of source VPN for static route. The value ranges from 1 to 31.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.4.1.2

hwStaticRouteDestIpAddrExt

OCTET STRING (SIZE (4))

Not-accessible

The destination IP address of this route.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.4.1.3

hwStaticRouteDestMaskAddrExt

OCTET STRING (SIZE (4))

Not-accessible

The mask of the destination address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.4.1.4

hwStaticRouteNextHopExt

OCTET STRING (SIZE (4))

Not-accessible

The name of the destination VPN for gateway address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.4.1.5

hwStaticRouteOutIfIndexExt

INTEGER (0..4294967295)

Not-accessible

The ifnet index of the outgoing interface of static route.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.4.1.6

hwStaticRouteDestVpnNameExt

OCTET STRING (SIZE (0..31))

Read-create

The name of the destination VPN for gateway address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.4.1.7

hwStaticRouteBfdNameExt

OCTET STRING (SIZE (0..15))

Read-create

The name of BFD session to which static route is to be bound.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.4.1.8

hwStaticRoutePreferExt

Unsigned32 (1..255)

Read-create

The preference of static route.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.4.1.9

hwStaticRouteDescripExt

OCTET STRING (SIZE (0..80))

Read-create

The description of static route.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.4.1.10

hwStaticRouteRowStatusExt

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

The operation for static route.

RM_MIB_ROW_STATUS_ACTIVE 1 RM_MIB_ROW_STATUS_CREATEANDGO 4 RM_MIB_ROW_STATUS_DESTROY 6

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.4.1.11

hwStaticRoutePermanentExt

INTEGER { none(0), permanent(1) }

Read-create

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.5.1.1

hwIpv6StaticRouteSourceVpnName

OCTET STRING (SIZE (0..31))

not-accessible

The name of source VPN for IPv6 static route.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.5.1.2

hwIpv6StaticRouteDestIpAddr

OCTET STRING (SIZE (16))

not-accessible

The destination IPv6 address of this route.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.5.1.3

hwIpv6StaticRoutePrefixLen

INTEGER (0..4294967295)

not-accessible

The prefix length of the destination IPv6 address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.5.1.4

hwIpv6StaticRouteNextHop

OCTET STRING (SIZE (16))

not-accessible

The next hop of an IPv6 static route.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.5.1.5

hwIpv6StaticRouteOutIfIndex

INTEGER (0..4294967295)

not-accessible

The interface index of the outgoing interface of an IPv6 static route.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.5.1.6

hwIpv6StaticRouteDestVpnName

OCTET STRING (SIZE (0..31))

read-create

The name of the destination VPN for IPv6 static route.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.5.1.8

hwIpv6StaticRouteNqaAdminName

OCTET STRING (SIZE (0..32))

read-create

The administrator name of an NQA to which IPv6 static routes are to be bound.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.5.1.9

hwIpv6StaticRouteNqaTestName

OCTET STRING (SIZE (0..32))

read-create

The test name of an NQA to which IPv6 static routes are to be bound.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.5.1.10

hwIpv6StaticRoutePrefer

Unsigned32 (1..255)

read-create

The preference of an IPv6 static route.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.5.1.11

hwIpv6StaticRouteTag

INTEGER (0..4294967295)

read-create

The tag of an IPv6 static route.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.5.1.12

hwIpv6StaticRouteDescr

OCTET STRING (SIZE (0..80))

read-create

The description of an IPv6 static route.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.5.1.13

hwIpv6StaticRouteRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

The operation for an IPv6 static route.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.5.1.14

hwIpv6StaticRoutePermanent

SYNTAX INTEGER

{

none(0)

permanent(1)

}

read-create

Specifies the permanent-Advertising attribute of the static route.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.1.6.1

hwIpv4PrefixNum

INTEGER (0..4294967295)

read-only

This object indicates the current number of IPv4 route prefixes.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.145.1.6.2

hwIpv6PrefixNum

INTEGER (0..4294967295)

read-only

This object indicates the current number of IPv6 route prefixes.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.145.3.1.1.1

hwL3vpnTnlId

INTEGER (0..4294967295)

Not-accessible

The object indicates the tunnel ID.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.3.1.1.2

hwVpnIndex

Unsigned32 (0..4096)

Not-accessible

The object indicates the VRF index of a VPN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.3.1.1.3

hwVpnName

OCTET STRING (SIZE (0..31))

Read-only

The object indicates the VPN name.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.3.2.1.1

hwVplsTnlId

INTEGER (0..4294967295)

Not-accessible

The object indicates the tunnel ID.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.3.2.1.2

hwVplsVcId

INTEGER (0..4294967295)

Not-accessible

The object indicates the VC ID of a VPLS.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.3.2.1.3

hwVsiIndex

INTEGER (0..4294967295)

Read-only

The object indicates the VSI index of a VPLS.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.3.2.1.4

hwVsiId

INTEGER (0..4294967295)

Read-only

The object indicates the VSI ID of a VPLS.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.3.2.1.5

hwVsiName

OCTET STRING (SIZE (1..31))

Read-only

The object indicates the VSI name of a VPLS.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.3.2.1.6

hwVplsVcType

INTEGER (0..4294967295)

Read-only

The object indicates the VC type of a VPLS.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.3.2.1.7

hwVplsPeerIp

OCTET STRING (SIZE (4))

Read-only

The object indicates the peer IP address of a VPLS.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.3.3.1.1

hwPwVllTnlId

INTEGER (0..4294967295)

Not-accessible

The object indicates the tunnel ID.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.3.3.1.2

hwAcIndex

INTEGER (0..4294967295)

Not-accessible

The object indicates the AC index of a PWE3.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.3.3.1.3

hwPwVllIfName

OCTET STRING (SIZE (1..64))

Read-only

The object indicates the interface name of a PWE3.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.3.3.1.4

hwMasterSlaveFlag

INTEGER (0..4294967295)

Read-only

The object indicates the master and slave flags of a PWE3.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.3.3.1.5

hwPwVllPeerIp

OCTET STRING (SIZE (4))

Read-only

The object indicates the peer IP address of a PWE3.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.3.3.1.6

hwPwVllVcId

INTEGER (0..4294967295)

Read-only

The object indicates the VC ID of a PWE3.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.3.3.1.7

hwPwVllSvcFlag

INTEGER (0..4294967295)

Read-only

The object indicates the type of a PWE3.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.3.3.1.8

hwPwVcType

INTEGER

Read-only

An indication of the L2Vpn's VC encapsulation type

• frameRelayDlciMartini(1)
• atmAal5SduVccTransport(2)
• atmTransparentCellTransport(3)
• vlan(4)
• ethernet(5)
• hdlc(6)
• ppp(7)
• cem(8)
• atmN2OneVccCellTransport(9)
• atmN2OneVpcCellTransport(10)
• ipLayer2Transport(11)
• atmOne2OneVccCellMode(12)
• atmOne2OneVpcCellMode(13)
• atmAal5PduVccTransport(14)
• frameRelayPortMode(15)
• cep(16)
• saE1oP(17)
• saT1oP(18)
• saE3oP(19)
• saT3oP(20)
• cESoPsnBasicMode(21)
• tDMoIPbasicMode(22)
• l2VpnCESoPSNTDMwithCAS(23)
• l2VpnTDMoIPTDMwithCAS(24)
• frameRelayDlci(25)
• ipInterworking(64)
• unknown(255)

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.3.3.1.9

hwSvcReceiveLabel

INTEGER (0..4294967295)

Read-only

The object indicates the inbound label.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.3.3.1.10

hwSvcTransmitLabel

INTEGER (0..4294967295)

Read-only

The object indicates the outbound label.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.3.4.1.1

hwTunnelIf

OCTET STRING (SIZE (1..64))

Not-accessible

The object indicates the tunnel interface name.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.3.4.1.2

hwTunnelId

INTEGER (0..4294967295)

Read-only

The object indicates the tunnel ID.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.3.5.1.1

hwMultiHopPwe3TnlId

INTEGER (0..4294967295)

Not-accessible

The object indicates the tunnel ID.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.3.5.1.2

hwMultiHopPwe3VcType

INTEGER (0..4294967295)

Not-accessible

The object indicates the VC type of a Multi-hop PWE3.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.3.5.1.3

hwMultiHopPwe3VcId

INTEGER (0..4294967295)

Not-accessible

The object indicates the VC ID of a Multi-hop PWE3.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.3.5.1.4

hwMultiHopPwe3PeerIp

OCTET STRING (SIZE (4))

Read-only

The object indicates the peer IP address of a Multi-hop PWE3.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.6.1

hwTunnelGroupUp

Tunnels selected by the applications are defined by the next hop and the tunnel policy. If all the tunnels used for load balancing are Down, this trap will be sent to the user.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.6.2

hwTunnelGroupDown

Tunnels selected by the applications are defined by the next hop and the tunnel policy. If any one of the tunnels used for load balancing is Up, this trap will be sent to the user.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.10.1

hwIpv4PrefixExceed

This notification is generated when the number of IPv4 prefixes exceeds or attempts to exceed the maximum allowed value as indicated by hwIpv4PrefixLimitValue.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.10.2

hwIpv4PrefixExceedClear

This notification is generated when the number of IPv4 prefixes exceeds the value indicated by hwIpv4PrefixLimitValue, and then falls below this value. A single notification MUST be generated when this threshold is exceeded, and no other notifications of this type should be issued until the value of hwCurIpv4PrefixNum has fallen below that of hwIpv4PrefixLimitValue.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.10.3

hwIpv4PrefixThresholdExceed

The number of IPv4 prefixes exceeds the threshold value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.10.4

hwIpv4PrefixThresholdExceedClear

The number of IPv4 prefixes falls below the threshold value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.11.1

hwIpv6PrefixExceed

This notification is generated when the number of IPv6 prefixes exceeds or attempts to exceed the maximum allowed value as indicated by hwIpv6PrefixLimitValue.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.11.2

hwIpv6PrefixExceedClear

This notification is generated when the number of IPv6 prefixes exceeds the value indicated by hwIpv6PrefixLimitValue, and then falls below this value. A single notification MUST be generated when this threshold is exceeded, and no other notifications of this type should be issued until the value of hwCurIpv6PrefixNum has fallen below that of hwIpv6PrefixLimitValue.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.11.3

hwIpv6PrefixThresholdExceed

The number of IPv6 prefixes exceeds the threshold value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.11.4

hwIpv6PrefixThresholdExceedClear

The number of IPv6 prefixes falls below the threshold value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.19.1.1

hwPublicIpv4PrefixExceed

The number of public IPv4 prefixes has exceeded the maximum value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.19.1.2

hwPublicIpv4PrefixExceedClear

The number of public IPv4 prefixes falls below the maximum value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.19.1.3

hwPublicIpv4PrefixThresholdExceed

The number of public IPv4 prefixes exceeds the threshold value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.19.1.4

hwPublicIpv4PrefixThresholdExceedClear

The number of public IPv4 prefixes falls below the threshold value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.19.2.1

hwPublicIpv6PrefixExceed

The number of public IPv6 prefixes has exceeded the maximum value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.19.2.2

hwPublicIpv6PrefixExceedClear

The number of public IPv6 prefixes falls below the maximum value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.19.2.3

hwPublicIpv6PrefixThresholdExceed

The number of public IPv6 prefixes exceeds the threshold value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.19.2.4

hwPublicIpv6PrefixThresholdExceedClear

The number of public IPv6 prefixes falls below the threshold value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.145.19.3.1

hwL3vpnIpv6PrefixExceed

This object indicates the alarm generated when the number of IPv6 route prefixes in the VPN instance exceeds the maximum number that is allowed.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.145.19.3.2

hwL3vpnIpv6PrefixExceedClear

This object indicates the clear alarm generated when the number of IPv6 route prefixes in the VPN instance falls below the maximum number that is allowed.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.145.19.3.3

hwL3vpnIpv6PrefixThresholdExceed

This object indicates the alarm generated when the number of IPv6 route prefixes in the VPN instance exceeds the maximum number that is allowed.

This object is implemented as defined in the corresponding MIB file.