HUAWEI-DHCPS-MIB

1.3.6.1.4.1.2011.5.7.2.1.12

hwDHCPSServiceStatus

INTEGER{enabled(1),disabled(2)}

Read-write

This object indicates the status of the DHCP server service.

The statuses can be:

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.13

hwDHCPSDetectingServerStatus

INTEGER{enabled(1),disabled(2)}

Read-write

This object indicates the status of the DHCP server detection function.

The values can be enabled(1) and disabled(2).

By default, the value is disabled(2).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.14

hwDHCPSPingNum

INTEGER32 (0..10)

Read-write

The value of this object identifies the maximum number of Ping packets sent out during duplicate address detection.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.15

hwDHCPSPingTimeout

INTEGER32 (0..10000)

Read-write

The value of this object identifies the delay in responding to Ping packets during duplicate address detection. The delay is in milliseconds.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.16

hwDHCPSWriteDataStatus

INTEGER{enabled(1),disabled(2)}

Read-write

This object indicates whether the function of saving DHCP data to a hard disk is enabled. By default, the function is disabled.

The DHCP data to be saved is the contents in hwDHCPSConflictIPTable and hwDHCPSIPInUseTable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.17

hwDHCPSWriteDataDirection

OCTET STRING (SIZE (1..255))

Read-only

This object indicates the directory to which DHCP data is saved.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.18

hwDHCPSWriteDataDelay

INTEGER32 (300..86400)

Read-write

The value of this object identifies the allowable delay in saving data to a hard disk.

The delay is in seconds.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.19

hwDHCPSWriteDataRecover

INTEGER{enabled(1),disabled(2)}

Read-write

This object indicates the flag of recovering the DHCP data based on the data saved on the hard disk. It determines whether to recover the DHCP data based on the data on the hard disk when system starts up.

The default value is "disabled".

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.20

hwDHCPSIPInUseResetIP

OCTET STRING (SIZE (4))

Read-write

This object indicates information on an IP address in use that will be cleared.

The value 0 is returned for the Set operation.

Currently, the maximum access is write-only; the return value NULL string is supported only.

1.3.6.1.4.1.2011.5.7.2.1.21

hwDHCPSConflictIPResetIP

OCTET STRING (SIZE (4))

Read-write

This object indicates information on a conflicted IP address that will be cleared.

The value 0 is returned for the Set operation.

Currently, the maximum access is write-only; the return value NULL string is supported only.

1.3.6.1.4.1.2011.5.7.2.1.22

hwDHCPSIPResetFlag

INTEGER {ipInUse(1),conflictIp(2)}

Read-write

This object indicates the flag of the Reset operation.

The value 1 means deleting IP addresses in use. The value 2 means deleting conflicted IP addresses.

Currently, the maximum access is write-only; the return value NULL string is supported only.

1.3.6.1.4.1.2011.5.7.2.1.23

hwDHCPSGlobalPoolNumber

Integer32

Read-only

The value of this object identifies the total number of global DHCP address pools.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.24

hwDHCPSGlobalPoolAutoBindingNum

Integer32

Read-only

This object indicates the total number of IP addresses dynamically allocated by the DHCP server address pool.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.25

hwDHCPSGlobalPoolManualBindingNum

Integer32

Read-only

The value of this object identifies the total number of manually bound IP addresses on a DHCP server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.26

hwDHCPSGlobalPoolExpiredBindingNum

Integer32

Read-only

The value of this object identifies the total number of expired bound IP addresses on a DHCP server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.27

hwDHCPSInterfacePoolNumber

Integer32

Read-only

The value of this object identifies the total number of interface address pools.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.28

hwDHCPSInterfacePoolAutoBindingNum

Integer32

Read-only

The value of this object identifies the total number of IP addresses automatically bound in an interface address pool.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.29

hwDHCPSInterfacePoolManualBindingNum

Integer32

Read-only

The value of this object identifies the total number of IP addresses manually bound in an interface address pool.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.30

hwDHCPSInterfacePoolExpiredBindingNum

Integer32

Read-only

The value of this object identifies the total number of expired IP addresses bound in an interface address pool.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.31

hwDHCPSBadPktNum

Integer32

Read-only

The value of this object identifies the total number of unknown packets received by a DHCP server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.32

hwDHCPSBootRequestPktNum

Integer32

Read-only

The value of this object identifies the total number of BOOTP Request packets received by a DHCP server from DHCP clients.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.33

hwDHCPSDiscoverPktNum

Integer32

Read-only

The value of this object identifies the total number of DHCP Discover packets received from DHCP clients.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.34

hwDHCPSRequestPktNum

Integer32

Read-only

The value of this object identifies the total number of DHCP Request packets received from DHCP clients.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.35

hwDHCPSDeclinePktNum

Integer32

Read-only

The value of this object identifies the total number of DHCP Decline packets received from DHCP clients.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.36

hwDHCPSReleasePktNum

Integer32

Read-only

The value of this object identifies the total number of DHCP Release packets received from DHCP clients.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.37

hwDHCPSInformPktNum

Integer32

Read-only

The value of this object identifies the total number of DHCP Inform packets received from DHCP clients.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.38

hwDHCPSBootReplyPktNum

Integer32

Read-only

The value of this object identifies the total number of BOOTP Reply packets sent by a DHCP server to DHCP clients.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.39

hwDHCPSOfferPktNum

Integer32

Read-only

The value of this object identifies the total number of DHCP Offer packets sent by a DHCP server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.40

hwDHCPSAckPktNum

Integer32

Read-only

The value of this object identifies the total number of DHCP Ack packets sent by a DHCP server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.41

hwDHCPSNakPktNum

Integer32

Read-only

The value of this object identifies the total number of DHCP Nak packets sent by a DHCP server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.42

hwDHCPSStatisticsReset

INTEGER{invalid(0),reset(1)}

Read-write

This object indicates whether to reset the statistics on the packets received and sent by a DHCP server.

The value 1 means clearing statistics.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.1.1.1

hwDHCPSGlobalPoolName

Octet string

Read-only

This object indicates the name of a global address pool to be created on or deleted from a DHCP server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.1.1.2

hwDHCPSGlobalPoolRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the status of rows in this table.

Currently, only three actions are used: active(1), createAndGo(4), destroy(6).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.2.1.1

hwDHCPSGlobalPoolType

INTEGER{null(0),host(1),network(2)}

Read-write

This object indicates the type of a DHCP global address pool. Any operations to this object must be bound with the operations to hwDHCPSGlobalPoolNetwork and hwDHCPSGlobalPoolNetworkMask or with the operations to hwDHCPSGlobalPoolMask. Any separate operation to this object will be regarded as an invalid operation.

The types can be:

At present, this object is read-only.

1.3.6.1.4.1.2011.5.7.2.1.2.1.2

hwDHCPSGlobalPoolNetwork

OCTET STRING (SIZE (4))

Read-write

This object indicates the IP address segment that can be allocated dynamically in a global address pool. To delete a configured IP address segment, set hwDHCPSGlobalPoolConfigUndoFlag to 1.

The Set operation to this object must be performed concurrently with the Set operation to hwDHCPSGlobalPoolNetworkMask.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.2.1.3

hwDHCPSGlobalPoolNetworkMask

OCTET STRING (SIZE (4))

Read-write

This object indicates the mask of an IP address in a global address pool. The Set operation to this object must be performed concurrently with the Set operation to hwDHCPSGlobalPoolNetwork. Any alone Set operation to this object will be regarded as an invalid operation.

When an IP address segment is deleted from a global address pool, its mask is also deleted automatically, and no further operation is needed.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.2.1.5

hwDHCPSGlobalPoolHostMask

OCTET STRING (SIZE (4))

Read-write

This object indicates the mask of a manually bound IP address in the global address pool.

When a manually bound IP address is deleted from a global address pool, its mask is also deleted automatically, and no further operation needed.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.2.1.7

hwDHCPSGlobalPoolConfigUndoFlag

INTEGER{undonetworkip(1),undohostip(2),undohosthaddr(3),invalid(4)}

Read-write

This object indicates the undo operation flag bit in the configuration table of a global address pool.

The flag bit can be:

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.3.1.1

hwDHCPSGlobalPoolLeaseDay

Integer32 (0..999)

Read-write

The value of this object identifies the number of days of a lease. The default value is 1.

A lease is the period over which an IP address is allocated to a client.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.3.1.2

hwDHCPSGlobalPoolLeaseHour

Integer32 (0..23)

Read-write

The value of this object identifies the number of hours of a lease. The default value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.3.1.3

hwDHCPSGlobalPoolLeaseMinute

Integer32 (0..59)

Read-write

The value of this object identifies the number of minutes of a lease. The default value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.3.1.4

hwDHCPSGlobalPoolLeaseUnlimited

INTEGER

Read-write

This object indicates the flag denoting if the lease is unlimited. The flag can be:

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.3.1.5

hwDHCPSGlobalPoolDomainName

OCTET STRING (SIZE (1..63))

Read-write

This object indicates the domain name provided for a client.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.3.1.6

hwDHCPSGlobalPoolClientGatewayIPString

OCTET STRING (SIZE (0..129))

Read-write

This object indicates the IP address of the gateway provided for a client.

A maximum of eight IP addresses can be provided.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.3.1.7

hwDHCPSGlobalPoolClientGatewayIPUndo

OCTET STRING (SIZE (4))

Read-write

This object indicates the entered IP address of a gateway that will be deleted. The IP address can be only an IP address that has been configured on the gateway. Get return value 0.0.0.0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.3.1.8

hwDHCPSGlobalPoolClientDNSIPString

OCTET STRING (SIZE (0..129))

Read-write

This object indicates the IP address of a DNS server provided for clients.

A maximum of eight IP addresses can be configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.3.1.9

hwDHCPSGlobalPoolClientDNSIPUndo

OCTET STRING (SIZE (4))

Read-write

This object indicates the IP address of a DNS server to be deleted.

The IP address can be only an IP address that has been configured for a DNS server. Get return value 0.0.0.0

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.3.1.10

hwDHCPSGlobalPoolClientNetbiosType

INTEGER

Read-write

This object indicates the NetBIOS node type provided for a client.

The NetBIOS node type can be:

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.3.1.11

hwDHCPSGlobalPoolClientNbnsIPString

OCTET STRING (SIZE (0..129))

Read-write

This object indicates the IP address of a NetBIOS server provided for a client.

A maximum of eight IP addresses can be configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.3.1.12

hwDHCPSGlobalPoolClientNbnsIPUndo

OCTET STRING (SIZE (4))

Read-write

This object indicates the IP address of a NetBIOS server to be deleted.

The IP address can be only an IP address that has been configured for a NetBIOS server. Get return value 0.0.0.0

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.3.1.13

hwDHCPSGlobalPoolParaUndoFlag

INTEGER

Read-write

This object indicates the undo operation flag bit of the parameters of a global address pool.

The flag bit can be:

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.3.1.14

hwDHCPSGlobalPoolIPInUseReset

INTEGER

Read-write

This object indicates that lease information of all online users in the global address pool is cleared.

The value can be:

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.4.1.1

hwDHCPSGlobalPoolOptionCode

Integer32 (2..254)

Read-only

This object indicates the Option operation code of a global address pool. All options begin with a tag octet, which uniquely identifies the option.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.4.1.2

hwDHCPSGlobalPoolOptionType

INTEGER

Read-create

This object indicates the Option operation type of a global address pool.

The Option operation type can be:

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.4.1.3

hwDHCPSGlobalPoolOptionAscii

OCTET STRING (SIZE (0..256))

Read-create

This object indicates the Options with the operation type being ASCII character strings.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.4.1.4

hwDHCPSGlobalPoolOptionHexString

OCTET STRING (SIZE (0..255))

Read-create

This object indicates the Options with the operation type being hexadecimal strings.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.4.1.5

hwDHCPSGlobalPoolOptionIPString

OCTET STRING (SIZE (0..129))

Read-create

This object indicates the Options with the operation type being IP addresses.

A maximum of eight IP addresses can be specified at one time.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.4.1.6

hwDHCPSGlobalPoolOptionRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the status of rows in the table.

Currently, only three actions are used: active(1), createAndGo(4), destroy(6).

When adding an Option, you must specify the Option operation type and the corresponding value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.4.1.7

hwDHCPSGlobalPoolOptionCipher

OBJECT-TYPE(SIZE (0..104))

read-create

This object indicates the ciphertext character string on the DHCP server global address pool.

This object is implemented different from that defined in the corresponding MIB file. The return value of Get operation must be ******. The Set operation is not supported.

1.3.6.1.4.1.2011.5.7.2.1.6.1.1

hwDHCPSInterfacePoolLeaseDay

Integer32

Read-write

This object indicates the lease (in days) of an interface address pool.

A lease is the period over which an IP address is allocated to a client.

The value ranges from 0 to 999 and the default value is 1.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.6.1.2

hwDHCPSInterfacePoolLeaseHour

Integer32

Read-write

This object indicates the lease (in hours) of an interface address pool.

The value ranges from 0 to 23 and the default value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.6.1.3

hwDHCPSInterfacePoolLeaseMinute

Integer32

Read-write

This object indicates the lease (in minutes) of an interface address pool.

The value ranges from 0 to 59 and the default value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.6.1.4

hwDHCPSInterfacePoolLeaseUnlimited

INTEGER

Read-write

This object indicates a flag denoting if the lease of a pool is unlimited.

The flag can be:

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.6.1.5

hwDHCPSInterfacePoolDomainName

OCTET STRING (SIZE (1..63))

Read-write

This object indicates the domain name provided for a DHCP client of an interface address pool.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.6.1.6

hwDHCPSInterfacePoolClientDNSIPString

OCTET STRING (SIZE (0..129))

Read-write

This object indicates the IP address of a DNS server provided for a DHCP client of the interface address pool.

A maximum of eight IP addresses can be provided.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.6.1.7

hwDHCPSInterfacePoolClientDNSIPUndo

OCTET STRING (SIZE (4))

Read-write

This object indicates the IP address of a DNS server to be deleted.

Get return value 0.0.0.0

1.3.6.1.4.1.2011.5.7.2.1.6.1.8

hwDHCPSInterfacePoolClientNetbiosType

INTEGER

Read-write

This object indicates the NetBIOS node type provided for a DHCP client.

The NetBIOS node type can be:

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.6.1.9

hwDHCPSInterfacePoolClientNbnsIPString

OCTET STRING (SIZE (0..129))

Read-write

This object indicates the IP address of a NetBIOS server in the interface address pool, provided for a DHCP client.

A maximum of eight IP addresses can be provided.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.6.1.10

hwDHCPSInterfacePoolClientNbnsIPUndo

OCTET STRING (SIZE (4))

Read-write

This object indicates the selected IP address of a NetBIOS server to be deleted in the interface address pool.

Get return value 0.0.0.0

1.3.6.1.4.1.2011.5.7.2.1.6.1.11

hwDHCPSInterfacePoolParaUndoFlag

INTEGER

Read-write

This object indicates the undo operation flag bit of the parameters of an interface address pool. The flag bit can be:

Get return value invalid(7)

1.3.6.1.4.1.2011.5.7.2.1.6.1.12

hwDHCPSInterfacePoolIPInUseReset

INTEGER

Read-write

This object indicates whether to clear the lease of an IP address in an interface address pool.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.7.1.1

HwDHCPSInterfacePoolOptionCode

Integer32 (2..254)

Read-only

This object indicates the Option operation code of an interface address pool.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.7.1.2

HwDHCPSInterfacePoolOptionType

INTEGER

Read-create

This object indicates the Option operation type of an interface address pool.

The Option operation type can be:

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.7.1.3

HwDHCPSInterfacePoolOptionAscii

OCTET STRING (SIZE (0..255))

Read-create

This object indicates the Options with the operation type being ASCII character strings.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.7.1.4

HwDHCPSInterfacePoolOptionHexString

OCTET STRING (SIZE (0..255))

Read-create

This object indicates the Options with the operation type being hexadecimal strings.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.7.1.5

HwDHCPSInterfacePoolOptionIPString

OCTET STRING (SIZE (0..129))

Read-create

This object indicates the Options with the operation type being IP addresses.

A maximum of eight IP addresses can be specified at one time.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.7.1.6

HwDHCPSInterfacePoolOptionRowStatus

Rowstatus

Read-create

This object indicates the status of rows in the table.

Currently, only three actions are used: active(1), createAndGo(4), destroy(6).

When adding an Option, you must specify the Option operation type and the corresponding value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.7.1.7

hwDHCPSInterfacePoolOptionCipher

OCTET STRING (SIZE (0..104))

read-create

This object indicates the ciphertext character string on the DHCP server interface address pool.

This object is implemented different from that defined in the corresponding MIB file. The return value of Get operation must be ******. The Set operation is not supported.

1.3.6.1.4.1.2011.5.7.2.1.8.1.1

hwDHCPSInterfacePoolStaticBindIP

OCTET STRING (SIZE (4))

Read-only

This object indicates the IP addresses statically bound in an interface address pool.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.8.1.2

hwDHCPSInterfacePoolStaticBindMac

OCTET STRING (SIZE (6))

Read-create

This object indicates the hardware addresses statically bound in an interface address pool.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.8.1.3

hwDHCPSInterfacePoolStaticBindRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the status of rows in this table.

Currently, only three actions are used: active(1), createAndGo(4), destroy(6).

When configuring static bindings, you must specify IP addresses and hardware addresses.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.9.1.1.1

hwDHCPSIPInUseHAddr

OCTET STRING (SIZE (6))

Read-only

This object indicates the MAC address of a client.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.9.1.1.2

hwDHCPSIPInUseIP

OCTET STRING (SIZE (4))

Read-only

This object indicates the IP address in the address pool allocated to a client.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.9.1.1.3

hwDHCPSIPInUseEndLease

OCTET STRING (SIZE (1..20))

Read-only

This object indicates the time during which users are online (in seconds).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.9.1.1.4

hwDHCPSIPInUseType

INTEGER{manual(1),auto(2),release(3),offered(4)}

Read-only

This object indicates the lease type of an IP address in an address pool.

The lease type can be:

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.9.1.1.5

hwDHCPSIPInUsePoolName

OCTET STRING (SIZE (1..64))

Read-only

This object indicates the name of the address pool to which the allocated IP address belongs to.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.9.1.1.6

hwDHCPSIPInUseInterface

INTEGER32

read-only

This object indicates the name of the interface to which the allocated IP address belongs to.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.45.1.1

hwDHCPSIPPOOLForbiddenIPStart

OCTET STRING (SIZE (4))

Read-only

This object indicates the start of the forbidden IP addresses.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.45.1.2

hwDHCPSIPPOOLForbiddenIPEnd

OCTET STRING (SIZE (4))

Read-only

This object indicates the end of the forbidden IP addresses.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.45.1.3

hwDHCPSIPPOOLForbiddenIPVRFName

OCTET STRING

read-only

This object indicates the VPN instance to which the forbidden IP addresses belong.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.45.1.4

hwDHCPSIPPOOLForbiddenIPRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object is used to create or delete an existent entry in this table.

Currently, active(1), createAndGo(4) and destroy(6) are supported.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.46.1.1

hwDHCPSIPPOOLConflictIP

OCTET STRING (SIZE (4))

Read-only

This object indicates the detected conflicted IP addresses.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.46.1.2

hwDHCPSIPPOOLConflictIPVRFName

OCTET STRING

read-only

This object indicates the VPN instance to which the conflicted IP addresses belong.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.46.1.3

hwDHCPSIPPOOLConflictIPType

INTEGER {ping(1),arp(2)}

Read-only

This object indicates the detection type of conflicted IP addresses. To ensure a consistency check, the DHCP server must probe reused addresses before allocating addresses.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.46.1.4

hwDHCPSIPPOOLConflictIPDetectTime

OCTET STRING (SIZE (20))

read-only

This object indicates the time when conflict addresses are detected, in the following format:

This object is implemented as defined in the corresponding MIB files.