HUAWEI-WLAN-AP-SERVICE-MIB

1.3.6.1.4.1.2011.6.139.19.1.3.3

hwWlanRadioResetChannelSwitchRecord

INTEGER(1)

read-write

This object indicates deletion of all information.

Default value: 1

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.1.1.1.1

hwWlanWdsVapApMac

MacAddress

not-accessible

This object indicates the MAC address of the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.1.1.1.2

hwWlanWdsVapRadioIndex

Integer32

not-accessible

This object indicates the radio index.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.1.1.1.3

hwWlanWdsVapWdsProfileName

OCTET STRING

not-accessible

This object indicates the WDS profile name.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.1.1.1.4

hwWlanWdsVapBssid

MacAddress

read-only

This object indicates the BSS ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.1.2.1.1

hwWlanWdsLinkApMac

MacAddress

not-accessible

This object indicates the MAC address of the local AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.1.2.1.2

hwWlanWdsLinkApRadioId

Integer32

not-accessible

This object indicates the radio ID of the local AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.1.2.1.3

hwWlanWdsLinkIndex

Integer32

not-accessible

This object indicates the index of the virtual link.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.1.2.1.4

hwWlanWdsLinkWlanID

Integer32

read-only

This object indicates the WLAN ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.1.2.1.5

hwWlanWdsLinkApName

OCTET STRING

read-only

This object indicates the name of the local AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.1.2.1.6

hwWlanWdsLinkApGroup

OCTET STRING

read-only

This object indicates the group to which the local AP belongs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.1.2.1.7

hwWlanWdsLinkPeerApMac

MacAddress

read-only

This object indicates the MAC address of the peer AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.1.2.1.8

hwWlanWdsLinkPeerApName

OCTET STRING

read-only

This object indicates the name of the peer AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.1.2.1.9

hwWlanWdsLinkWdsProfileName

OCTET STRING

read-only

This object indicates the name of the WDS profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.1.2.1.10

hwWlanMacWdsLinkWdsMode

INTEGER{middle(1),root(2),leaf(3)}

read-only

This object indicates the role of the local AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.1.2.1.15

hwWlanWdsLinkCoverageDistance

Integer32

read-only

This object indicates the coverage distance of the local AP. The unit is 100 m.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.1.2.1.16

hwWlanWdsLinkChannel

Integer32

read-only

This object indicates the link channel.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.1.2.1.17

hwWlanWdsLinkMaxRssi

Integer32

read-only

This object indicates the maximum RSSI of the link.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.1.2.1.18

hwWlanWdsLinkRssi

Integer32

read-only

This object indicates the RSSI of the link.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.1.2.1.19

hwWlanWdsLinkSnr

Integer32

read-only

This object indicates the SNR. The unit is 0.01 dB.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.1.2.1.20

hwWlanWdsLinkPER

Integer32

read-only

This object indicates the packet error rate.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.1.2.1.21

hwWlanWdsLinkResendRatio

Integer32

read-only

This object indicates the packet retransmission ratio.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.1.2.1.22

hwWlanWdsLinkPeerAPStatus

INTEGER{idle(1),autofind(2),typeNotMatch(3),fault(4),config(5),configFailed(6),download(7),normal(8),committing(9),commitFailed(10),standby(11),verMismatch(12),nameConflicted(13),invalid(14)}

read-only

This object indicates the status of the peer AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.1.2.1.23

hwWlanWdsLinkApId

Unsigned32

read-only

This object indicates the local AP ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.1.2.1.24

hwWlanWdsLinkPeerApId

Unsigned32

read-only

This object indicates the peer AP ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.1.2.1.25

hwWlanWdsLinkSecondChannel

INTEGER32

read-only

This object indicates the second link channel when 80 HMz+80 MHz channels are used.

This object is implemented as defined in the corresponding MIB file.

read-only

SNR of each spatial stream of a WDS link.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.2.1.1.1

hwWlanMeshVapApMac

MacAddress

not-accessible

This object indicates the AP index.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.2.1.1.2

hwWlanMeshVapRadioIndex

Integer32

not-accessible

This object indicates the radio index.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.2.1.1.3

hwWlanMeshVapMeshProfileName

OCTET STRING

not-accessible

This object indicates the Mesh profile name.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.2.1.1.4

hwWlanMeshVapBssid

MacAddress

read-only

This object indicates the BSS ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.2.1.1.5

hwWlanMeshVapAuthType

INTEGER{wepOpenSystem(1),wpa2PreShareKey(14)}

read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.2.2.1.1

hwWlanMeshLinkApMac

MacAddress

not-accessible

This object indicates the MAC address of the local AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.2.2.1.2

hwWlanMeshLinkApRadioId

Integer32

not-accessible

This object indicates the radio ID of the local AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.2.2.1.3

hwWlanMeshLinkIndex

Integer32

not-accessible

This object indicates the Mesh link index.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.2.2.1.4

hwWlanMeshLinkApName

OCTET STRING

read-only

This object indicates the name of the local AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.2.2.1.5

hwWlanMeshLinkApGroup

OCTET STRING

read-only

This object indicates the group to which the local AP belongs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.2.2.1.6

hwWlanMeshLinkMeshRole

INTEGER{meshNode(1),meshPortal(2) }

read-only

This object indicates the role of the local AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.2.2.1.7

hwWlanMeshLinkWlanID

Integer32

read-only

This object indicates the WLAN ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.2.2.1.8

hwWlanMeshLinkPeerApMac

MacAddress

read-only

This object indicates the MAC address of the peer AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.2.2.1.9

hwWlanMeshLinkPeerApName

OCTET STRING

read-only

This object indicates the name of the peer AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.2.2.1.10

hwWlanMeshLinkChannelID

Integer32

read-only

This object indicates the channel ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.2.2.1.11

hwWlanMeshLinkCoverageDistance

Integer32

read-only

This object indicates the coverage distance of the local AP. The unit is 100 m.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.2.2.1.12

hwWlanMeshLinkRssiValue

Integer32

read-only

This object indicates the RSSI value.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.2.2.1.13

hwWlanMeshLinkMaxRssi

Integer32

read-only

This object indicates the maximum RSSI.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.2.2.1.14

hwWlanMeshLinkSnr

Integer32

read-only

This object indicates the SNR. The unit is 0.01 dB.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.2.2.1.15

hwWlanMeshLinkPER

Integer32

read-only

This object indicates the packet error rate.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.2.2.1.16

hwWlanMeshLinkResendRatio

Integer32

read-only

This object indicates the packet retransmission ratio.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.2.2.1.17

hwWlanMeshLinkPeerAPStatus

INTEGER{idle(1),autofind(2),typeNotMatch(3),fault(4),config(5),configFailed(6),download(7),normal(8),committing(9),commitFailed(10),standby(11),verMismatch(12),nameConflicted(13),invalid(14)}

read-only

This object indicates the status of the peer AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.2.2.1.18

hwWlanMeshLinkApId

Unsigned32

read-only

This object indicates the local AP ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.2.2.1.19

hwWlanMeshLinkPeerApId

Unsigned32

read-only

This object indicates the peer AP ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.2.2.1.20

hwWlanMeshLinkSecondChannel

Integer32

read-only

This object indicates the second link channel when 80 HMz+80 MHz channels are used.

This object is implemented as defined in the corresponding MIB file.

read-only

This object indicates the SNR of each spatial stream of a Mesh link.

This object is implemented as defined in the corresponding MIB file.

read-only

This object is implemented as defined in the corresponding MIB file.

read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.1.1.1

hwWlanRadioCalibrateStatisicsApMac

MacAddress

not-accessible

This object indicates the MAC address of the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.1.1.2

hwWlanRadioCalibrateStatisicsRadioId

Unsigned32

not-accessible

This object indicates the radio ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.1.1.3

hwWlanRadioCalStatisSignalBadCount

Unsigned32

read-only

This object indicates the number of times that radio parameters are automatically calibrated because the packet loss ratio or collision ratio exceeds the threshold.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.1.1.4

hwWlanRadioCalStatisCalibratePowerCount

Unsigned32

read-only

This object indicates the number of times transmit power is automatically calibrated.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.1.1.5

hwWlanRadioCalStatisCalibrateChannelCount

Unsigned32

read-only

This object indicates the number of times the channel is automatically calibrated.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.1.1.6

hwWlanRadioCalibrateStatisicsOperMode

INTEGER{invalid(-1),clearstatistic(1)}

read-write

This object indicates the operation mode.

Only the write operation is supported.

1.3.6.1.4.1.2011.6.139.19.1.3.1.1.7

Unsigned32

read-only

This object indicates the AP ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.2.1.1

hwWlanRadioChannelSwitchRecordTimeIndex

Unsigned32

not-accessible

This object indicates the internal index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.2.1.2

hwWlanRadioChannelSwitchRecordSubIndex

Unsigned32

not-accessible

This object indicates the internal subindex of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.2.1.3

hwWlanRadioChannelSwitchRecordApName

OCTET STRING

read-only

This object indicates the AP name.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.2.1.4

hwWlanRadioChannelSwitchRecordRadioId

Unsigned32

read-only

This object indicates the radio ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.2.1.5

hwWlanRadioChannelSwitchRecordOldChannel

Unsigned32

read-only

This object indicates the channel before the switchover.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.2.1.6

hwWlanRadioChannelSwitchRecordNewChannel

Unsigned32

read-only

This object indicates the channel after the switchover.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.2.1.7

hwWlanRadioChannelSwitchRecordReason

OCTET STRING

read-only

This object indicates the reason for channel switching.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.2.1.8

hwWlanRadioChannelSwitchRecordTime

OCTET STRING

read-only

This object indicates the channel switching time.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.2.1.9

hwWlanRadioChSwitchRecordOldSecChannel

Unsigned32

read-only

Indicates the second channel before the switchover.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.2.1.10

hwWlanRadioChSwitchRecordNewSecChannel

Unsigned32

read-only

Indicates the second channel after the switchover.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.4.1.1.1

hwWlanSpectrumReporterApMac

MacAddress

not-accessible

This object indicates the MAC address of the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.4.1.1.2

hwWlanSpectrumReporterRadioId

Integer32

not-accessible

This object indicates the radio ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.4.1.1.3

hwWlanSpectrumReporterApName

OCTET STRING

read-only

This object indicates the AP name.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.1

hwWlanApIotCardApId

MacAddress

not-accessible

This object indicates the AP ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.2

hwWlanApIotCardIndex

Integer32(1..3)

not-accessible

This object indicates the IoT card index of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.3

hwWlanApIotCardState

INTEGER{present(1),absent(2)}

read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.4

hwWlanApIotCardApName

OCTET STRING(1–63)

read-only

This object indicates the AP name.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.5

hwWlanApIotCardSupportInfo

INTEGER{NO(1),YES(2)}

read-only

This object indicates whether card information query is supported.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.6

hwWlanApIotCardProtocolVer

OCTET STRING(0–16)

read-only

This object indicates the protocol version.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.7

hwWlanApIotCardWirelessStard

OCTET STRING(0–16)

read-only

This object indicates the wireless protocol supported by the card. The value is a 10-byte ASCII character set, for example, RFID, ANT, ZigBee, BT4.0, and Weightless.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.8

hwWlanApIotCardFreq

OCTET STRING(0–16)

read-only

This object indicates the frequency band used by the card. The value is an 8-byte ASCII character set, for example, 2.4G, 900M, 2.4/5G, and any value from 433M to 915M.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.9

hwWlanApIotCardVendorName

OCTET STRING(0–16)

read-only

This object indicates the vendor code. The value is an 8-byte ASCII character set, for example, HUAWEI.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.10

hwWlanApIotCardCardType

OCTET STRING(0–16)

read-only

This object indicates the card model. The value is a 12-byte ASCII character set, for example, TOEAPV1.2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.11

hwWlanApIotCardHardwareVer

OCTET STRING(0–16)

read-only

This object indicates the hardware version of the card. The value is a 2-byte ASCII code, which is fixed to VA, VB, or VC, indicating the first, second, or third version.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.12

hwWlanApIotCardFirmwareVer

OCTET STRING(0–32)

read-only

This object indicates the firmware version of the card. The value is a 4-byte number, for example, 00.01.00.01.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.13

hwWlanApIotCardSN

OCTET STRING(0–32)

read-only

This object indicates the module ID of the card, for example, 0000000001.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.14

hwWlanApIotCardConnectType

INTEGER{serial (1), ethernet(2), ethernet(up)(3), ethernet(down)(4), unknown(5)}

read-only

This object indicates the connection type of the card.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.15

hwWlanApIotCardConnectStatus

INTEGER{match(1),mismatch(2)}

read-only

This object indicates the connection status of the card.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.16

hwWlanApIotBaudRate

INTEGER{baud115200(1),baud9600(2),unknown(3)}

read-only

This object indicates the baud rate for serial communication on an IoT card slot.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.17

hwWlanApIotFrameVersion

OCTET STRING(0–10)

read-only

This object indicates the frame format of an extension interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.18

hwWlanApIotCardRecvPackets

Counter64

read-only

This object indicates the number of packets sent to the card.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.19

hwWlanApIotCardSendPackets

Counter64

read-only

This object indicates the number of packets received from the card.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.20

hwWlanApIotCardRecvBytes

Counter64

read-only

This object indicates the number of bytes sent to the card.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.21

hwWlanApIotCardSendBytes

Counter64

read-only

This object indicates the number of bytes received from the card.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.22

hwWlanApIotCardAntennaStatus

INTEGER{external(1),internal(2),invalid(3)}

read-only

This object indicates the antenna status of the card.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.23

hwWlanApIotCardIPv4Address

IpAddress

read-only

This object indicates the IPv4 address of the IoT card.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.24

hwWlanApIotCardIPv6Address

OCTET STRING

read-only

This object indicates the IPv6 address of the IoT card.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.25

hwWlanApIotCardMAC

MACAddress

read-only

This object indicates the MAC address of the IoT card.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.26

hwWlanApIotCardCentralFreq

INTEGER

read-only

This object indicates the center frequency of the IoT card.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.27

hwWlanApIotCardBandwidth

INTEGER

read-only

This object indicates the bandwidth of the IoT card.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.28

hwWlanApIotCardConnectServerStatus

INTEGER { connected(1), disconnected(2), unknown(3) }

read-only

This object indicates the status of the connection between the IoT card and the server.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.7.1.1.29

hwWlanApIotCardServerName

OCTET STRING (0..32)

read-only

This object indicates the name of the server connected to the IoT card.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.6.1.1.1

hwWlanBLESiteMacAddress

MacAddress

not-accessible

This object indicates the MAC address of a Bluetooth device.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.6.1.1.2

hwWlanBLESiteRssi

Integer32

read-only

This object indicates the RSSI of a Bluetooth device.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.6.1.1.3

hwWlanBLESitePower

Integer32

read-only

This object indicates the battery power of a Bluetooth device.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.6.1.1.4

hwWlanBLESiteAdvData

OCTET STRING

read-only

This object indicates the data content carried in broadcast frames sent by a Bluetooth device.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.6.1.1.5

hwWlanBLESiteAgingTimeout

Unsigned32

read-only

This object indicates the remaining aging time of a Bluetooth device, in minutes. The maximum value is 60.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.6.1.1.6

hwWlanBLESiteDetachedFlag

INTEGER{yes(1),no(2)}

read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.6.1.1.7

hwWlanBLESiteType

INTEGER{ibeacon(1),assertTag(2),sensorTag(3)}

read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.6.1.1.8

hwWlanBLESiteHostAPID

Integer

read-only

This object indicates the ID of the AP to which the built-in Bluetooth module belongs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.6.1.1.9

hwWlanBLESiteHostAPName

OCTET STRING

read-only

This object indicates the name of the AP to which the built-in Bluetooth module belongs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.6.1.1.10

hwWlanBLESiteBroadCastCount

Integer

read-only

This object indicates the number of broadcast packets received by the AP's built-in Bluetooth module.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.4.1.1

hwWlanRadioCalibrationSwitchRecordTimeIndex

Unsigned32

not-accessible

This object indicates the time when calibration is recorded.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.4.1.2

hwWlanRadioCalibrationSwitchRecordSubIndex

Unsigned32

not-accessible

This object indicates the serial number of a calibration record.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.4.1.3

hwWlanRadioCalibrationSwitchRecordApId

Unsigned32

read-only

This object indicates the ID of the AP involved in calibration.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.4.1.4

hwWlanRadioCalibrationSwitchRecordApName

OCTET STRING

read-only

This object indicates the name of the AP involved in calibration.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.4.1.5

hwWlanRadioCalibrationSwitchRecordRadioId

Unsigned32

read-only

This object indicates the index of the calibrated AP radio.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.4.1.6

hwWlanRadioCalibrationSwitchRecordOldChannel

Unsigned32

read-only

This object indicates the channel before calibration.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.4.1.7

hwWlanRadioCalibrationSwitchRecordNewChannel

Unsigned32

read-only

This object indicates the channel after calibration.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.4.1.8

hwWlanRadioCalibrationSwitchRecordOldEirp

Unsigned32

read-only

This object indicates the power before calibration.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.4.1.9

hwWlanRadioCalibrationSwitchRecordNewEirp

Unsigned32

read-only

This object indicates the power after calibration.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.4.1.10

hwWlanRadioCalibrationSwitchRecordOldRssi

Unsigned32

read-only

This object indicates the interference value before calibration.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.4.1.11

hwWlanRadioCalibrationSwitchRecordNewRssi

Unsigned32

read-only

This object indicates the interference value after calibration.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.4.1.12

hwWlanRadioCalibrationSwitchRecordReason

OCTET STRING

read-only

This object indicates the reason for triggering calibration.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.4.1.13

hwWlanRadioCalibrationSwitchRecordTime

OCTET STRING

read-only

This object indicates the time when calibration is triggered.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.4.1.14

hwWlanRadioCalibrationSwitchRecordNewBandwidth

INTEGER

read-only

This object indicates the bandwidth after calibration.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.4.1.15

hwWlanRadioCalibrationSwitchRecordOldBandwidth

INTEGER

read-only

This object indicates the bandwidth before calibration.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.4.1.16

hwWlanRadioCalibrationSwitchRecordNewSecChannel

Unsigned32

read-only

This object indicates the second channel after calibration.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.1.3.4.1.17

hwWlanRadioCalibrationSwitchRecordOldSecChannel

Unsigned32

read-only

This object indicates the second channel before calibration.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.3.1.3

hwWlanAeroscoutLocationViaAcTrap

• hwWlanAeroscoutExceptionReason: indicates the reason why the AeroScout location function fails when location packets are reported through the AC.

This object indicates that the AeroScout location function does not take effect when location packets are reported through the AC.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.19.3.1.4

hwWlanAeroscoutLocationViaAcRestoreTrap

• hwWlanAeroscoutExceptionReason: indicates the reason why the AeroScout location function fails when location packets are reported through the AC.

This object indicates that the alarm of the AeroScout location function failure when location packets are reported through the AC is cleared.

This object is implemented as defined in the corresponding MIB file.