HUAWEI-WLAN-STATION-MIB

1.3.6.1.4.1.2011.6.139.18.1.2.1.1

hwWlanStaMac

MacAddress

accessible-for-notify

This object indicates the MAC address of a STA, which identifies the STA and functions as the index for querying association information about the STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.2

hwWlanStaUsername

OCTET STRING

read-only

This object indicates the user name.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.3

hwWlanStaApMac

MacAddress

read-only

This object indicates the MAC address of the AP with which the STA associates.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.4

hwWlanStaApName

OCTET STRING

read-only

This object indicates the name of the AP with which the STA associates.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.5

hwWlanStaApGroup

OCTET STRING

read-only

This object indicates the AP group to which the STA belongs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.6

hwWlanStaRadioId

Unsigned32

read-only

This object indicates the ID of the radio with which the STA associates.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.7

hwWlanStaAssocBand

Unsigned32{2.4G(1),5G(2)}

read-only

This object indicates the frequency band where the STA resides.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.8

hwWlanStaSupportBand

Unsigned32

read-only

This object indicates the frequency band supported by the STA, in bits.

This object is in bitmap format. The bit value 1 indicates a corresponding frequency band.

• bit0 (1): 2.4G
• bit1 (1): 5G

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.9

hwWlanStaAccessChannel

Integer32

read-only

This object indicates the channel that the STA accesses.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.10

hwWlanStaRfMode

INTEGER{unknown(0),dotb(1),dotg(2),dotn(3),dota(4),dotac(5),dotax(6)}

read-only

This object indicates the radio mode of the STA. unknown(0) indicates an invalid value.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.11

hwWlanStaHtMode

INTEGER{invalid(1),ht40(2),ht20(3),ht80(4),ht160(5)}

read-only

This object indicates the HT mode of the STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.12

hwWlanStaMcsVal

Unsigned32

read-only

This object indicates the MCS value of the STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.13

hwWlanStaShortGIStatus

INTEGER{nonsupport(1),support(2)}

read-only

This object indicates whether the STA supports the short GI.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.14

hwWlanStaConnectRxRate

Unsigned32

read-only

This object indicates the rate at which the AP receives packets from the STA, in Mbit/s.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.15

hwWlanStaConnectTxRate

Unsigned32

read-only

This object indicates the rate at which the AP sends packets to the STA, in Mbit/s.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.16

hwWlanStaEssName

OCTET STRING

read-only

This object indicates the ESS with which the STA associates.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.17

hwWlanStaBSSID

MacAddress

read-only

This object indicates the air interface address for STA management.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.18

hwWlanStaSsid

OCTET STRING

read-only

This object indicates the SSID with which the STA associates.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.19

hwWlanStaStatus

INTEGER{age(1),associatedNotAuthenticated(2),associatedAndAuthenticated(3),roam(4),backup(5)}

read-only

This object indicates the STA's online status.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.20

hwWlanStaAuthenMethod

INTEGER{wepOpenSystem(1),wepOpenSystemMac(2),wepOpenSystem8021X(3),wepOpenSystemPortal(4),wepShareKey(5),wepShareKeyMac(6),wepShareKey8021X(7),wepShareKeyPortal(8),wpa8021X(9),wpaPreShareKey(10),wpaPskMac(11),wpaPskPortal(12),wpa2Dot1x(13),wpa2PreShareKey(14),wpa2PskMac(15),wpa2PskPortal(16),wapiCertification(17),wapiPreShareKey(18),wpaWpa2PreShareKey(19),wpaWpa2PskMac(20),wpaWpa2PskPortal(21),wpaWpa2Dot1x(22),wapiPskPortal(23),macDot1x(24),wepShareKey8021XMac(25),wpa8021XMac(26),wpa2Dot1xMac(27),wpaWpa2Dot1xMac(28),wepOpenSystemPortalMac(29),wepShareKeyPortalMac(30),wpaPskPortalMac(31),wpa2PskPortalMac(32),wpaWpa2PskPortalMac(33),wapiPskPortalMac(34),wpaPpsk(35),wpaPpskMac(36),wpaPpskPortal(37),wpaPpskPortalMac(38),wpa2Ppsk(39),wpa2PpskMac(40),wpa2PpskPortal(41),wpa2PpskPortalMac(42),wpaWpa2Ppsk(43),wpaWpa2PpskMac(44),wpaWpa2PpskPortal(45),wpaWpa2PpskPortalMac(46),wep8021X(47),wpa3Dot1x(48),wpa3Dot1xMac(49),wpa3Sae(50),wpa3SaePortal(51),wpa3SaeMac(52),wpa3SaePortalMac(53),wpa2PskWpa3Sae(54),wpa2PskWpa3SaePortal(55),wpa2PskWpa3SaePortalMac(56),wpa2PskWpa3SaeMac(57)}

read-only

This object indicates the STA's authentication method.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.21

hwWlanStaEncryptMethod

INTEGER{wpiSms4(1),wep40(2),wep104(3),tkip(4),aes(5),none(6)}

read-only

This object indicates the STA's encryption method.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.22

hwWlanStaQosMode

INTEGER{wmm(1),null(2)}

read-only

This object indicates the QoS mode of the STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.23

hwWlanStaRoamStatus

INTEGER{no(1),yes(2)}

read-only

This object indicates the roaming status of the STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.24

hwWlanStaVlan

Unsigned32

read-only

This object indicates the STA VLAN.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.25

hwWlanStaIP

IpAddress

read-only

This object indicates the STA's IP address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.27

hwWlanStaGateway

IpAddress

read-only

This object indicates the user gateway.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.28

hwWlanStaAssocTime

Integer32

read-only

This object indicates the initial association time of the STA.

The value is the number of seconds elapsed since 00:00:00 of January 1, 1970.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.29

hwWlanStaAccessTime

Integer32

read-only

This object indicates the time when user authentication starts.

If non-authentication is configured, the value of this object is equal to hwStaAssociateTime. If other authentication modes, especially, Portal authentication, are configured, the value of this object is larger than hwStaAssociateTime.

The value is the number of seconds elapsed since 00:00:00 of January 1, 1970.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.30

hwWlanStaOnlineTime

Integer32

read-only

This object indicates the association duration of the STA (online duration), which is timed from its first association.

The value is the number of seconds elapsed since 00:00:00 of January 1, 1970.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.31

hwWlanStaAccessOnlineTime

Integer32

read-only

This object indicates the time elapsed since the STA passes the authentication. This object applies only to Portal authentication STAs, in seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.32

hwWlanStaStatOperMode

INTEGER{invalid(1),clearstatistic(2)}

read-write

This object indicates that STA statistics are cleared.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.33

hwWlanStaWirelessStatRxFrames

Counter64

read-only

This object indicates the number of upstream frames received by the STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.34

hwWlanStaWirelessRxBytes

Counter64

read-only

This object indicates the number of upstream bytes received by the STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.35

hwWlanStaWirelessRxRate

Unsigned32

read-only

This object indicates the upstream rate of the STA, in bit/s.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.36

hwWlanStaWirelessStatTxFrames

Counter64

read-only

This object indicates the number of downstream frames received by the STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.37

hwWlanStaWirelessTxBytes

Counter64

read-only

This object indicates the number of downstream bytes received by the STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.38

hwWlanStaWirelessTxRate

Unsigned32

read-only

This object indicates the downstream rate of the STA, in bit/s.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.39

hwWlanStaPeriodSendDropFrames

Counter64

read-only

This object indicates the number of downstream packets (frames) discarded at the wireless side within the echo interval.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.40

hwWlanStaPeriodReSendFrames

Counter64

read-only

This object indicates the number of downstream packets (frames) retransmitted at the wireless side within the echo interval.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.42

hwWlanStaRssi

Integer32

read-only

This object indicates the received signal strength indicator (RSSI) of the STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.44

hwWlanStaSnrUs

Integer32

read-only

This object indicates the upstream SNR of the STA. The value is measured on the AP, in the unit of 0.01 dB. The special value 0x7FFFFFFF indicates that the measured value exceeds the threshold, and 0x7FFFFFFE indicates that the measured value cannot be obtained at present.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.45

hwWlanStaRxPowerUs

Integer32

read-only

This object indicates the upstream receive power of the STA. The value is measured on the AP, in the unit of 0.01 dB. The special value 0x7FFFFFFF indicates that the measured value exceeds the threshold, and 0x7FFFFFFE indicates that the measured value cannot be obtained at present.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.46

hwWlanStaChannelUtilRate

Unsigned32

read-only

This object indicates the channel utilization of the STA, in percentage.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.47

hwWlanStaChannelBusyRate

Unsigned32

read-only

This object indicates the busy rate of the STA channel, in percentage.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.48

hwWlanStaChannelTxRatio

Unsigned32

read-only

This object indicates the packet sending ratio of the STA channel, in percentage.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.49

hwWlanStaChannelRxRatio

Unsigned32

read-only

This object indicates the packet receiving ratio of the STA channel, in percentage.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.50

hwWlanStaChannelFreeRate

Unsigned32

read-only

This object indicates the idle rate of the STA channel, in percentage.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.51

hwWlanStaChannelInterfRate

Unsigned32

read-only

This object indicates the interference ratio of the STA channel, in percentage.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.52

hwWlanStaPeriodSendFrames

Unsigned32

read-only

This object indicates the number of downstream frames received within the echo interval.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.53

hwWlanStaApId

Unsigned32

read-only

This object indicates the AP ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.54

hwWlanStationUapsdCapacity

Integer32

read-only

This object indicates the service status of the Unscheduled Automatic Power Save Delivery (U-APSD).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.55

hwWlanStationPowerSavePercent

Integer32

read-only

This object indicates the percentage of power saved on the STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.62

hwWlanStaVHTCapable

INTEGER{nonsupport(1),support(2)}

read-only

This object indicates whether the STA supports 802.11ac.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.63

hwWlanStaVHTTxBFCapable

INTEGER{nonsupport(1),support(2)}

read-only

This object indicates whether the STA supports 802.11ac explicit beamforming.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.64

hwWlanStaMUMIMOCapable

INTEGER{nonsupport(1),support(2)}

read-only

This object indicates whether the STA supports MU-MIMO.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.67

hwWlanStaWirelessPacketDelay

Unsigned32

read-only

This object indicates the average delay for online STAs to send packets, in milliseconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.68

hwWlanStaAccessSuccessRate

Unsigned32

read-only

This object indicates the STA access success rate.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.69

hwWlanStaTotalAccessTime

Unsigned32

read-only

This object indicates the total online duration of the STA, in milliseconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.70

hwWlanStaDelayStatus

INTEGER{delayoffline(1),normal(2)}

read-only

This object indicates the current STA status. delayoffline indicates that the STA is in offline delay state, and normal indicates that the STA is in normal state.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.71

hwWlanStaAssocDuration

Unsigned32

read-only

This object indicates the STA association duration, in milliseconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.72

hwWlanStaWpaDuration

Unsigned32

read-only

This object indicates the WPA key negotiation duration, in milliseconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.73

hwWlanStaAuthDuration

Unsigned32

read-only

This object indicates the STA authentication duration, in milliseconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.74

hwWlanStaDhcpDuration

Unsigned32

read-only

This object indicates the time taken for the STA to obtain an IP address through DHCP, in milliseconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.77

hwWlanStaWirelessStatRxIPv6Frames

Counter64

read-only

This object indicates the IPv6 downstream traffic rate statistics.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.78

hwWlanStaWirelessRxIPv6Bytes

Counter64

read-only

This object indicates the number of bytes in the IPv6 downstream traffic.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.79

hwWlanStaWirelessStatTxIPv6Frames

Counter64

read-only

This object indicates the IPv6 upstream traffic rate statistics.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.80

hwWlanStaWirelessTxIPv6Bytes

Counter64

read-only

This object indicates the number of bytes in the IPv6 upstream traffic.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.81

hwWlanStaGatewayIPv6

OCTET STRING

read-only

This object indicates the IPv6 gateway address of STAs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.1

hwWlanApAssocStatApMac

MacAddress

not-accessible

This object indicates the MAC address of the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.2

hwWlanTotalOnlineTime

Unsigned32

read-only

This object indicates the total accumulated online time of the STAs that have ever associated with the AP, in seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.3

hwWlanTotalAssociatedStationCount

Unsigned32

read-only

This object indicates the number of STAs that have ever associated with the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.4

hwWlanCurrAssociatedStationCount

Unsigned32

read-only

This object indicates the number of STAs that are being associated with the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.5

hwWlanAssociationRequestCount

Unsigned32

read-only

This object indicates the number of association requirements received by the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.6

hwWlanAssociationRejectCount

Unsigned32

read-only

This object indicates the number of association requirements rejected by the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.7

hwWlanAssociationFailedCount

Unsigned32

read-only

This object indicates the number of association failures on the AP, excluding rejected association requirements.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.8

hwWlanReAssociationRequestCount

Unsigned32

read-only

This object indicates the number of re-association requirements received by the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.9

hwWlanReAssociationRejectCount

Unsigned32

read-only

This object indicates the number of re-association requirements rejected by the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.10

hwWlanReAssociationFailedCount

Unsigned32

read-only

This object indicates the number of re-association failures on the AP, excluding rejected re-association requirements.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.11

hwWlanDisAssocOfUserNotifiedCount

Unsigned32

read-only

This object indicates the number of times STAs proactively go offline.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.12

hwWlanDisAssocOfStaRoamCount

Unsigned32

read-only

This object indicates the number of associations removed because a STA roams to another AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.13

hwWlanDisAssocOfStaAgeCount

Unsigned32

read-only

This object indicates the associations removed because a STA goes offline unexpectedly.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.14

hwWlanDisAssocOfApUnableHandleCount

Unsigned32

read-only

This object indicates the associations removed due to insufficient AP capability.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.15

hwWlanDisAssocOfOtherReasonsCount

Unsigned32

read-only

This object indicates the associations removed due to other reasons.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.16

hwWlanAssocRequestCntByResource

Unsigned32

read-only

This object indicates the number of STA association requests rejected by the AP because of insufficient resources.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.17

hwWlanStaExceptionalOfflineCnt

Unsigned32

read-only

This object indicates the number of times STAs are forced offline.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.18

hwWlanReAssociationSuccessCount

Unsigned32

read-only

This object indicates the number of successful re-association attempts.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.19

hwWlanBSSNotSupportAssocFailCount

Unsigned32

read-only

This object indicates the number of association requests rejected because the rate of STA does not meet the basic rate requirement.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.20

hwWlanStaAccessRequestCount

Unsigned32

read-only

This object indicates the total number of access attempts.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.21

hwWlanStaAccessRequestFailedCount

Unsigned32

read-only

This object indicates the total number of access failures.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.22

hwWlanStaAuthenRequestCount

Unsigned32

read-only

This object indicates the total number of authentication attempts.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.23

hwWlanStaAuthenRequestFailedCount

Unsigned32

read-only

This object indicates the total number of authentication failures.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.24

hwWlanRefusedStaNumByResource

Unsigned32

read-only

This object indicates the number of rejected STA requests.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.25

hwWlanStaAssocAndReAssocRequestCount

Unsigned32

read-only

This object indicates the number of user access requests.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.26

hwWlanStaAuthenRequestSuccessCount

Unsigned32

read-only

This object indicates the number of successful access times.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.3.1.27

hwWlanStationApStatApId

Unsigned32

read-only

This object indicates the AP ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.4.1.1.1

hwWlanStaOnlineFailMacAddress

MacAddress

not-accessible

This object indicates the user MAC address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.4.1.1.2

hwWlanStaOnlineFailReasonIndex

Unsigned32

not-accessible

This object indicates the reason ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.4.1.1.3

hwWlanStaOnlineFailApMac

MacAddress

read-only

This object indicates the MAC address of the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.4.1.1.4

hwWlanStaOnlineFailApName

OCTET STRING

read-only

This object indicates the AP name.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.4.1.1.5

hwWlanStaOnlineFailRadioId

Unsigned32

read-only

This object indicates the radio ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.4.1.1.6

hwWlanStaOnlineFailWlanId

Unsigned32

read-only

This object indicates the WLAN ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.4.1.1.7

hwWlanStaOnlineFailLastFailTime

OCTET STRING

read-only

This object indicates the time when a user fails to go online.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.4.1.1.8

hwWlanStaOnlineFailReason

OCTET STRING

read-only

This object indicates the failure reason.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.4.1.1.9

hwWlanStaOnlineFailSsid

OCTET STRING

read-only

This object indicates the SSID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.4.1.1.10

hwWlanStaOnlineFailRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.4.1.1.11

hwWlanStaOnlineFailApId

Unsigned32

read-only

This object indicates the AP ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.4.2.1.1

hwWlanStaOnlineFailReasonCode

Unsigned32

not-accessible

This object indicates the index of a STA online failure reason.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.4.2.1.2

hwWlanStaOnlineFailReasonDesc

OCTET STRING

read-only

This object indicates the description of a STA online failure reason.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.4.2.1.3

hwWlanStaOnlineFailReasonCount

Unsigned32

read-only

This object indicates the count of STA online failure reasons.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.5.1.1.1

hwWlanStaOfflineMacAddress

MacAddress

not-accessible

This object indicates the user MAC address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.5.1.1.2

hwWlanStaOfflineReasonIndex

Unsigned32

not-accessible

This object indicates the reason ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.5.1.1.3

hwWlanStaOfflineApMac

MacAddress

read-only

This object indicates the MAC address of the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.5.1.1.4

hwWlanStaOfflineApName

OCTET STRING

read-only

This object indicates the AP name.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.5.1.1.5

hwWlanStaOfflineRadioId

Unsigned32

read-only

This object indicates the radio ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.5.1.1.6

hwWlanStaOfflineWlanId

Unsigned32

read-only

This object indicates the WLAN ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.5.1.1.7

hwWlanStaOfflineLastFailTime

OCTET STRING

read-only

This object indicates the time when a user fails to go online.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.5.1.1.8

hwWlanStaOfflineReason

OCTET STRING

read-only

This object indicates the failure reason.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.5.1.1.9

hwWlanStaOfflineSsid

OCTET STRING

read-only

This object indicates the SSID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.5.1.1.10

hwWlanStaOfflineFailRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.5.1.1.11

hwWlanStaOfflineApId

Unsigned32

read-only

This object indicates the AP ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.5.2.1.1

hwWlanStaOfflineReasonCode

Unsigned32

not-accessible

This object indicates the index of a STA offline reason.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.5.2.1.2

hwWlanStaOfflineReasonDesc

OCTET STRING

read-only

This object indicates the description of a STA offline reason.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.5.1.1.3

hwWlanStaOfflineReasonCount

Unsigned32

read-only

This object indicates the count of STA offline reasons.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.6.1.1.1

hwWlanStaRoamTraceStaMac

MacAddress

not-accessible

This object indicates the MAC address of a STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.6.1.1.2

hwWlanStaRoamTraceIndex

Integer32

not-accessible

This object indicates the internal ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.6.1.1.3

hwWlanStaRoamTraceTime

Unsigned32

read-only

This object indicates the roaming time.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.6.1.1.4

hwWlanStaRoamTraceAcIP

IpAddress

read-only

This object indicates the IPv4 address of the AC for setting up a link with an AP associated with the STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.6.1.1.6

hwWlanStaRoamTraceApName

OCTET STRING

read-only

This object indicates the name of the AP associated with a STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.6.1.1.7

hwWlanStaRoamTraceRadioId

Integer32

read-only

This object indicates the ID of the radio with which the STA associates.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.6.1.1.8

hwWlanStaRoamTraceBssid

MacAddress

read-only

This object indicates the BSSID of a STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.6.1.1.9

hwWlanStaRoamTraceInRate

Integer32

read-only

This object indicates the roam-in rate.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.6.1.1.10

hwWlanStaRoamTraceOutRate

Integer32

read-only

This object indicates the roam-out rate.

• High-order 16 bits: TX rate
• Least significant 16 bits: RX rate

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.6.1.1.11

hwWlanStaRoamTraceInRssi

Integer32

read-only

This object indicates the roam-in RSSI.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.6.1.1.12

hwWlanStaRoamTraceOutRssi

Integer32

read-only

This object indicates the roam-out RSSI.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.6.1.1.13

hwWlanStaRoamTraceRoamType

INTEGER{1,2,3}

read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.6.1.1.14

hwWlanStaRoamTraceApId

Integer32

read-only

This value is invalid.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.6.1.1.15

hwWlanStaRoamTraceInfo

INTEGER{0,1,2,3}

read-only

This object indicates the roaming track of the current STA.

• 0: common roaming
• 1: This value is invalid.
• 2: PMK fast roaming
• 3: 802.11r fast roaming

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.6.1.1.16

hwWlanStaRoamTraceMemberAcIP

IpAddress

read-only

This object indicates the IPv4 address of the AC for setting up a link with a mobility group after roaming.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.1.1.1

hwWlanStaAuthErrorTrap

• hwWlanApMac: AP MAC address. The value type is MacAddress.
• hwWlanRadioID: radio ID. The value type is Unsigned32.
• hwWlanStaMac: STA MAC address. The value type is MacAddress.
• hwWlanApName: AP name. The value type is OCTET STRING.
• hwWlanStaAssocBssid: BSSID associated with a STA. The value type is MacAddress.
• hwWlanStaSsid: SSID associated with a STA. The value type is OCTET STRING.
• hwWlanStaAuthenticationMode: authentication method of the STA that has interference. The value type is Integer32.
• hwWlanStaFailCodeType: error codes for STA authentication and association failures. The value type is INTEGER{reasonCode(1),statusCode(2)}.
• hwWlanStaAuthenticationFailCause: STA authentication failure reason. The value type is Integer32.
• hwWlanStaAuthenticationFailCauseStr: user authentication failure reason. The value type is OCTET STRING.
• hwWlanApId: AP ID, Unsigned32

STA authentication fails.

current

1.3.6.1.4.1.2011.6.139.18.1.1.1.2

hwWlanStaAssoFailTrap

• hwWlanApMac: AP MAC address. The value type is MacAddress.
• hwWlanRadioID: radio ID. The value type is Unsigned32.
• hwWlanStaMac: STA MAC address. The value type is MacAddress.
• hwWlanApName: AP name. The value type is OCTET STRING.
• hwWlanStaAssocBssid: BSSID associated with a STA. The value type is MacAddress.
• hwWlanStaSsid: SSID associated with a STA. The value type is OCTET STRING.
• hwWlanStaFailCodeType: error codes for STA authentication and association failures. The value type is INTEGER{reasonCode(1),statusCode(2)}.
• hwWlanStaAuthenticationFailCause: STA authentication failure reason. The value type is Integer32.
• hwWlanStaAuthenticationFailCauseStr: user authentication failure reason. The value type is OCTET STRING.
• hwWlanApId: AP ID, Unsigned32

STA association fails.

current

1.3.6.1.4.1.2011.6.139.18.1.1.1.3

hwWlanUserInvalidCerficationTrap

• hwWlanApMac: AP MAC address. The value type is MacAddress.
• hwWlanRadioID: radio ID. The value type is Unsigned32.
• hwWlanStaMac: STA MAC address. The value type is MacAddress.
• hwWlanApName: AP name. The value type is OCTET STRING.
• hwWlanStaAssocBssid: BSSID associated with a STA. The value type is MacAddress.
• hwWlanStaSsid: SSID associated with a STA. The value type is OCTET STRING.
• hwWlanApId: AP ID, Unsigned32

A user with an invalid certificate attempts to access the network.

current

1.3.6.1.4.1.2011.6.139.18.1.1.1.4

hwWlanStaRepititiveAttackTrap

• hwWlanApMac: AP MAC address. The value type is MacAddress.
• hwWlanRadioID: radio ID. The value type is Unsigned32.
• hwWlanStaMac: STA MAC address. The value type is MacAddress.
• hwWlanApName: AP name. The value type is OCTET STRING.
• hwWlanStaAssocBssid: BSSID associated with a STA. The value type is MacAddress.
• hwWlanStaSsid: SSID associated with a STA. The value type is OCTET STRING.
• hwWlanApId: AP ID, Unsigned32

The STA undergoes a replay attack.

current

1.3.6.1.4.1.2011.6.139.18.1.1.1.5

hwWlanStaTamperAttackTrap

• hwWlanApMac: AP MAC address. The value type is MacAddress.
• hwWlanRadioID: radio ID. The value type is Unsigned32.
• hwWlanStaMac: STA MAC address. The value type is MacAddress.
• hwWlanApName: AP name. The value type is OCTET STRING.
• hwWlanStaAssocBssid: BSSID associated with a STA. The value type is MacAddress.
• hwWlanStaSsid: SSID associated with a STA. The value type is OCTET STRING.
• hwWlanApId: AP ID, Unsigned32

A tamper attack occurs.

current

1.3.6.1.4.1.2011.6.139.18.1.1.1.6

hwWlanStaLowLevelSecAttackTrap

• hwWlanApMac: AP MAC address. The value type is MacAddress.
• hwWlanRadioID: radio ID. The value type is Unsigned32.
• hwWlanStaMac: STA MAC address. The value type is MacAddress.
• hwWlanApName: AP name. The value type is OCTET STRING.
• hwWlanStaAssocBssid: BSSID associated with a STA. The value type is MacAddress.
• hwWlanStaSsid: SSID associated with a STA. The value type is OCTET STRING.
• hwWlanApId: AP ID, Unsigned32

The AP security level was lowered.

current

1.3.6.1.4.1.2011.6.139.18.1.1.1.7

hwWlanStaAddressRedirectionAttackTrap

• hwWlanApMac: AP MAC address. The value type is MacAddress.
• hwWlanRadioID: radio ID. The value type is Unsigned32.
• hwWlanStaMac: STA MAC address. The value type is MacAddress.
• hwWlanApName: AP name. The value type is OCTET STRING.
• hwWlanStaAssocBssid: BSSID associated with a STA. The value type is MacAddress.
• hwWlanStaSsid: SSID associated with a STA. The value type is OCTET STRING.
• hwWlanApId: AP ID, Unsigned32

An address redirection attack occurs.

current

1.3.6.1.4.1.2011.6.139.18.1.1.1.8

hwWlanStaWepIdConflictTrap

• hwWlanWepIDConflictTrapAPMAC: AP MAC address. The value type is MacAddress.
• hwWlanWepIDConflictTrapAPName: AP name. The value type is OCTET STRING.
• hwWlanWepIDConflictTrapRadioId: conflicting AP radio ID. The value type is Integer32.
• hwWlanWepIDConflictTrapPreSSID: SSID that causes conflict. The value type is OCTET STRING.
• hwWlanWepIDConflictTrapCurrSSID: SSID used when conflict occurs. The value type is OCTET STRING.
• hwWlanWepIDConflictTrapCipherIdx: conflicting WEP key ID newly configured. The value type is Integer32.
• hwWlanApId: AP ID, Unsigned32

SSID keys conflict.

current

1.3.6.1.4.1.2011.6.139.18.1.1.1.12

hwStationIPConflictTrap

• hwWlanApMac: AP MAC address. The value type is MacAddress.
• hwWlanStaMac: STA MAC address. The value type is MacAddress.
• hwWlanApName: AP name. The value type is OCTET STRING.
• hwWlanConflictIPAddress: Conflicted IP address. The value type is IPAddress.
• hwWlanApId: AP ID. The value type is Unsigned32.

The IP address of a STA conflicts with the gateway address.

current