HUAWEI-HGMP-MIB

1.3.6.1.4.1.2011.6.7.4.1

hgmpNTDPCollectTopTime

Integer32

READ-WRITE

The value of this object identifies the interval for the device to initiatively collect topology information, in minutes.

The value ranges from 0 to 65535.

By default, the value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.7.4.2

hgmpNTDPHopRange

Integer32

READ-WRITE

The value of this object identifies the number of hops that the device covers in collecting the topology.

The value ranges from 1 to 16.

By default, the value is 8.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.7.4.3

hgmpNTDPRun

INTEGER

READ-WRITE

The value of this object identifies whether the NTDP function is enabled on the device:

• false(0)
• true(1)

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.7.4.4

hgmpNTDPPortDelay

Integer32 (1..1000)

READ-WRITE

The value of this object identifies the delay for the port to forward topology request packets, in milliseconds.

The value ranges from 1 to 1000.

By default, the value is 20.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.7.4.5

hgmpNTDPHopDelay

Integer32 (1..1000)

READ-WRITE

The value of this object identifies the delay for each hop to forward topology request packets, in milliseconds.

The value ranges from 1 to 1000.

By default, the value is 200.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.7.4.12

hgmpNTDPExplore

INTEGER

read-write

The value of this object identifies whether to trigger the collection of NTDP topology information:

• invalid(0): The collection of NTDP topology information is not triggered.

• start(1): The collection of NTDP topology information is triggered.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.7.5.1

hwNDPStatus

INTEGER

READ-WRITE

The value of this object identifies whether the NDP module is enabled globally:

• disable(0)
• enable(1)

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.7.5.2

hwNDPHelloTimer

Integer32

READ-WRITE

The value of this object identifies an interval at which NDP packets are sent, in seconds.

The value ranges from 5 to 254.

By default, the value is 60.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.7.5.3

hwNDPAgingTime

Integer32

READ-WRITE

The value of this object identifies the duration that the peer device reserves the neighboring information of the local device, in seconds.

the value ranges from 5 to 255.

By default, the value is 180.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.7.5.7

hwNDPTrunkMemberEnable

INTEGER{enabled(1),disabled(2)}

read-write

The value of this object identifies whether to enable neighbor discovery based on trunk member interfaces.

• enabled(1): Neighbor discovery based on trunk member interfaces is enabled.

• disabled(2): Neighbor discovery based on trunk member interfaces is disabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.7.4.9.1.1

hgmpNTDPInterfaceIfIndex

Integer32

READ-ONLY

The value of this object identifies the index of a Layer 2 port on a switch.

The value ranges from 0 to 65535.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.7.4.9.1.2

hgmpNTDPInterfaceEnable

INTEGER{false(0),true(1)}

READ-WRITE

The value of this object identifies whether NDTP is enabled on the port.

• false(0)
• true(1)

If the value is true (1), it indicates that the device is enabled with NDTP and can send and receive NDTP packets through this port.

If the value is false (0), it indicates that the device is not enabled with NDTP.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.7.4.13.1.1

hgmpNTDPTopoLocalDeviceID

OCTET STRING (SIZE (0..10))

not-accessible

This object indicates the ID of a local device.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.7.4.13.1.2

hgmpNTDPTopoLocalPortName

OCTET STRING (SIZE (0..64))

not-accessible

This object indicates the name of an interface on a local device.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.7.4.13.1.3

hgmpNTDPTopoNbrDeviceID

OCTET STRING (SIZE (0..10))

not-accessible

This object indicates the ID of a neighboring device.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.7.4.13.1.4

hgmpNTDPTopoNbrPortName

OCTET STRING (SIZE (0..64))

not-accessible

This object indicates the name of an interface on a neighboring device.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.7.4.13.1.5

hgmpNTDPTopoLinkStatus

INTEGER { active(1) }

read-only

The value of this object identifies the status of all links whose information has been collected.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.7.5.5.1.1

hwNDPIfIndex

Integer32

READ-ONLY

The value of this object identifies the index of a Layer 2 port.

The value ranges from 0 to 65535.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.7.5.5.1.2

hwNDPPortStatus

INTEGER{disable(0),enable(1)}

READ-WRITE

The value of this object identifies the NDP status of the port.

• disable(0)
• enable(1)

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.7.4.14.1

hgmpNTDPTopoChange

None

This object indicates an NTDP topology change notification.

This object is implemented as defined in the corresponding MIB file.