No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Enterprise
Worldwide
Huawei Global - English
Search
Support Documentation
S12700 and S12700E V200R019C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
HUAWEI-KOMPELLA-MIB

HUAWEI-KOMPELLA-MIB

Functions Overview

Kompella uses the Border Gateway Protocol (BGP) as the signaling protocol to transmit Layer 2 information and VC labels. Kompella implements the Layer 2 virtual private network (L2VPN) in end-to-end (CE to CE) mode in the multi-protocol label switching (MPLS) network.

HUAWEI-KOMPELLA-MIB is used to query various settings and statistics in L2VPN Kompella mode. The MIB can be used to query VPN configuration, VPN target configuration, connected CE configuration, VC configuration, VE tunnel, VC statistics, VC Up, VC Down, the switchover between active and standby PWs, or the trap message sent when a VC is deleted. The entries in this MIB cannot be set.

The OID of the root object is as follows:

iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).huawei(2011).huaweiMgmt(5).hwDatacomm(25).hwL2Vpn(119).hwL2VpnKompella(2)

Relationship Between Tables

Figure 68-1 Relationship between hwKompellaVpnTargetTable and haKompellaVpnTable

Figure 68-2 Relationship between hwKompellaCeTable and hwKompellaVpnTable

Figure 68-3 Relationship between hwKompellaCeTable, hwKompellaVcTable, and hwKompellaVpnTable

Description of Single Objects

hwKompellaVcStateChangeReason

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.119.2.1.10

hwKompellaVcStateChangeReason

INTEGER{invalidReason(1),vcCreated(2),vcDeleted(3),ldpSessionDown(4),ldpSessionUp(5),receivedDifLabelOrMtu(6),receivedIntfParaMatching(7),receivedIntfParaUnMatched(8),receivedUnPassCbitCheck(9),receivedUnPassPwLoopCheck(10),receivedNewMapping(11),receivedNewMappingButRemoteVcDown(12),receivedWithdrawn(13),receivedLdpRelease(14),receivedLdpRequest(15),ldpGrEndProcessing(16),receivedRsvpMessage(17),interfaceUp(18),interfaceDown(19),interfaceEncapChanged(20),refresh(21),downloadAgain(22),tunnelUp(23),tunnelDown(24),receivedNewRlb(25),deletedRlb(26),vcCreatedOrTurnedToAnother(27),outInterInInvalidState(28),outInterInValidNow(29),ldpNotifiForward(30),ldpNotifiNotForward(31),pwRestart(32),downloadFtnAndIlmForEthTrunk(33),acOamFaultDetectDisable(34),remoteAcFault(35),remoteAcFaultResume(36),localAcFault(37),localAcFaultResume(38),remotePsnFault(39),remotePsnFaultResume(40),localPsnFault(41),localPsnFaultResume(42),bfdForPwStateChangeToDown(43),bfdForPwStateChangeToUp(44),bfdForPwStateChangeToAdminDown(45),bfdForPwDisable(46),manualSetEnable(47),manualSetDisable(48),delayTimeOut(49),resumeTimeOut(50),vrrpMaster(51),vrrpBackup(52),vrrpInit(53),vrrpDelete(54),vrrpTrack(55),undoVrrpTrack(56),lspPingTimeOut(57),vcDownWhenReceivedNewRLB(58),mtuMatched(59),mtuUnmatched(60),vsiShut(61),vsiResume(62),setAdminVSI(63),undosetAdminVSI(64),bvsiBindAc(65),bvsiUnbindAc(66),ivsiBindBVSI(67),ivsiUnbindBVSI(68),deletedVSI(69),reconstructFwdTable(70),mclagMaster(71),mclagBackup(72),adminPwUp(73),adminPwDown(74),vccvOk(75),vccvFailed(76),localIfnetOk(77),inVcLabelOk(78),localIfnetRelease(79),inVcLabelRelease(80),switchOverEnable(81),switchOverDisable(82),setBVSI(83),undoSetBVSI(84),shutdownBVSI(85),undoShutdownBVSI(86),notificationReceived(87),pwApsSwitch(88),routeUnreachable(89),routeReachable(90),aging(91),verification(92),tdmBitRateMatched(93),tdmBitRateUnmatched(94)}

Accessible-for-notify

The value of this object identifies the reason for Kompella VC status change. For details, see hwKompellaVcStateChangeReason.

This object is implemented as defined in the corresponding MIB files.

hwKompellaSwitchRmtCEID

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.119.2.1.11

hwKompellaSwitchRmtCEID

INTEGER (0..4294967295)

Accessible-for-notify

The value of this object identifies the remote CE ID of the PW that changes from the working status to the protect status when the Kompella VC performs PW switchover.

It is a decimal integer that ranges from 0 to 249.

This object is implemented as defined in the corresponding MIB files.

Description of MIB Tables

hwKompellaVpnTable

This table is used to display information about the Kompella L2VPN configuration. You can create and delete a Kompella L2VPN by using this table. Currently, this table supports the GET operation, rather than the SET operation.

The index of this table is hwKompellaVpnName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.119.2.1.1.1.1

hwKompellaVpnName

DisplayString (SIZE (1..31))

Not-accessible

This object indicates the VPN name.

The name is a case-sensitive string of 1 to 31 characters with no space.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.1.1.2

hwKompellaVpnVcType

INTEGER{frameRelayDlciMartini(1),atmAal5SduVccTransport(2),atmTransparentCellTransport(3),vlan(4),ethernet(5),hdlc(6),ppp(7),cem(8),atmN2OneVccCellTransport(9),atmN2OneVpcCellTransport(10),ipLayer2Transport(11),atmOne2OneVccCellMode(12),atmOne2OneVpcCellMode(13),atmAal5PduVccTransport(14),frameRelayPortMode(15),cep(16),saE1oP(17),saT1oP(18),saE3oP(19),saT3oP(20),cESoPsnBasicMode(21),tDMoIPbasicMode(22),l2VpnCESoPSNTDMwithCAS(23),l2VpnTDMoIPTDMwithCAS(24),frameRelayDlci(25),ipInterworking(64),unknown(255)}

Read-create

This object indicates the encapsulation type of the Kompella VC. For details, see KompellaVpnVcType.

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.119.2.1.1.1.3

hwKompellaVpnRouteDistinguisher

DisplayString (SIZE (3..21))

Read-create

This object indicates the Route Distinguisher (RD) value of the VPN.

The format is ASN:nn or IP-address:nn.

If this object is not correctly configured, hwKompellaCeTable and hwKompellaVcTable cannot be created.

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.119.2.1.1.1.4

hwKompellaVpnCtrlWord

INTEGER { enable(1), disable(2) }

Read-create
The value of this object identifies the control word function is enabled. The object has the following values:
  • 1: true
  • 2: false

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.119.2.1.1.1.5

hwKompellaVpnMtu

Unsigned32(size(0|46..16352))

Read-create

The value of this object identifies the MTU value of the Kompella VC.

The value is a decimal integer that ranges from 46 to 16352. The default value is 1500.

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.119.2.1.1.1.51

hwKompellaVpnRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status of this table.

Deletion of a Kompella L2VPN causes deletion of hwKompellaCeTable and hwKompellaVcTable that are associated with this VPN.

Currently, the maximum access is read-only.

Creation Restriction

No entry in this table can be created.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restraint.

hwKompellaVpnTargetTable

This table is a VPN target configuration table. You can create and delete the VPN target in a Kompella L2VPN by using this table. Currently, this table supports the GET operation, rather than the SET operation.

The indexes of this table are hwKompellaVpnName, hwKompellaVpnTargetType, and hwKompellaVpnTarget.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.119.2.1.2.1.2

hwKompellaVpnTargetType

INTEGER { import(1), export(2) }

Not-accessible
The object indicates the type of the extension community attribute for a VPN target. The object has the following values:
  • 1: import
  • 2: export

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.2.1.3

hwKompellaVpnTarget

DisplayString (SIZE (3..21))

Not-accessible

The object indicates the value of the extension community attribute for a VPN target. The format is ASN:nn or IP-address:nn.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.2.1.51

hwKompellaVpnTargetRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status of this table.

Restriction:
  • Before creating this table, you must create the VPN that is specified in hwKompellaVpnName.
  • After creating this table, you are unable to modify the configuration.

Currently, the maximum access is read-only.

Creation Restriction

No entry in this table can be created.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restraint.

hwKompellaCeTable

The table is a CE configuration table. You can create and delete a CE in a VPN by using the table. Currently, this table supports the GET operation, rather than the SET operation.

The indexes of this table are hwKompellaVpnName and hwKompellaCeID.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.119.2.1.3.1.1

hwKompellaCeID

Unsigned32(size(0..249))

Not-accessible

This object indicates the ID of the local CE.

The value is a decimal integer that ranges from 0 to 249.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.3.1.2

hwKompellaCeName

DisplayString (SIZE (1..20))

Read-create

This object indicates the name of the CE.

The name is a case-sensitive string of 1 to 20 characters with no space.

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.119.2.1.3.1.3

hwKompellaCeIDRange

Unsigned32(size(1..250))

Read-create

The value of this object identifies the maximum number of CEs connected to the current PE.

The value is a decimal integer that ranges from 1 to 250.

The default value is 10.

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.119.2.1.3.1.4

hwKompellaCeIDDefaultOffset

Unsigned32(size(0..1))

Read-create

The value of this object identifies the originating offset value of the CE ID.

The value is a decimal integer, that is, 0 or 1. The default value is 0.

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.119.2.1.3.1.51

hwKompellaCERowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status of this table.

Restriction:

  • Before creating this table, you must create the VPN that is specified in hwKompellaVpnName.

    After creating this table, you are unable to modify the configuration.

  • Deletion of a CE causes deletion of the hwKompellaVcTable that is associated with the CE.

Currently, the maximum access is read-only.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restraint.

hwKompellaVcTable

This table is a VC configuration table. You can create and delete a VC in a VPN by using the table. Currently, this table supports the GET operation, rather than the SET operation.

The indexes of this table are hwKompellaVpnName, hwKompellaCEID, hwKompellaVcRmtCEID, and hwKompellaVcIfIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.1

hwKompellaVcIfIndex

INTEGER

Not-accessible

This object indicates the index of AC interface.

The value 0 indicates that the index of the interface is invalid.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.2

hwKompellaVcRmtCeID

Unsigned32(size(0..249))

Not-accessible

This object indicates the remote CE ID.

It is a decimal integer that ranges from 0 to 249.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.3

hwKompellaVcInboundLabel

INTEGER (0..4294967295)

Read-only

This object indicates the value of the incoming label.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.4

hwKompellaVcOutboundLabel

INTEGER (0..4294967295)

Read-only

This object indicates the value of the outgoing label.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.5

hwKompellaVcCtrlWord

INTEGER { enable(1), disable(2) }

Read-create

The value of this object identifies whether the control word is enabled. The object has the following values:

  • 1: enable
  • 2: disable

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.6

hwKompellaVcTnlPolicyName

Octet String(size(0..39))

Read-create

This object indicates the name of the tunnel policy used by the Kompella VC.

The name is a string of 1 to 20 characters.

The default value is zero-length.

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.7

hwKompellaVcVlanTagMode

Integer{Raw(1),Tagged(2), rawTagNotConfiged(255)}

Read-create

The value of this object identifies the VLAN tag mode. The object has the following values:

  • 1: raw mode
  • 2: tagged mode
  • 255: invalid mode (internetworking)

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.8

hwKompellaVcSecondary

INTEGER{true(1),false(2)}

Read-create

The value of this object identifies whether the Kompella VC is backup VC or not. The object has the following values:

  • 1: backup VC
  • 2: non-backup VC

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.10

hwKompellaVCForBFDIndex

INTEGER (0..4294967295)

Read-only

This object indicates the index of BFD for PW.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.11

hwKompellaVcOperStatus

Integer{UP(1),DOWN(2)}

Read-only

The value of the object identifies the operating status of the Kompella VC. The object has the following values:

  • 1:up
  • 2:down

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.12

hwKompellaVcRerouteDelayTime

INTEGER (0..4294967295)

Read-create

This object indicates the delay time of VC switching.

It is a decimal integer, expressed in milliseconds.

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.13

hwKompellaVcRerouteResumeTime

INTEGER (0..4294967295)

Read-create

This object indicates the duration of the backup PW being Down after the primary PW goes Up.

The object is a decimal integer, expressed in milliseconds.

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.14

hwKompellaVcReroutePolicy

Integer{delay(1), immediately(2), never(3), none(4), err(5), invalid(6), immediatelySwitch(7)}

Read-only

The value of this object indicates the switching policy of VC. The object has the following values:

  • 1: indicates that the switching is Down after a certain period of delay.
  • 2: indicates the immediate switching.
  • 3: indicates that the recovered master VC does not switch to be the master until the backup VC fails.
  • 4: none.
  • 5: indicates that the switching policy is incorrect.
  • 6: indicates that the switching policy is unavailable.
  • 7: indicates that in the PW redundancy scenario, the traffic immediately switches to the master VC after the master VC recovers.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.15

hwKompellaVcRerouteReason

INTEGER{invalidReason(1),vcCreated(2),vcDeleted(3),ldpSessionDown(4),ldpSessionUp(5),receivedDifLabelOrMtu(6),receivedIntfParaMatching(7),receivedIntfParaUnMatched(8),receivedUnPassCbitCheck(9),receivedUnPassPwLoopCheck(10),receivedNewMapping(11),receivedNewMappingButRemoteVcDown(12),receivedWithdrawn(13),receivedLdpRelease(14),receivedLdpRequest(15),ldpGrEndProcessing(16),receivedRsvpMessage(17),interfaceUp(18),interfaceDown(19),interfaceEncapChanged(20),refresh(21),downloadAgain(22),tunnelUp(23),tunnelDown(24),receivedNewRlb(25),deletedRlb(26),vcCreatedOrTurnedToAnother(27),outInterInInvalidState(28),outInterInValidNow(29),ldpNotifiForward(30),ldpNotifiNotForward(31),pwRestart(32),downloadFtnAndIlmForEthTrunk(33),acOamFaultDetectDisable(34),remoteAcFault(35),remoteAcFaultResume(36),localAcFault(37),localAcFaultResume(38),remotePsnFault(39),remotePsnFaultResume(40),localPsnFault(41),localPsnFaultResume(42),bfdForPwStateChangeToDown(43),bfdForPwStateChangeToUp(44),bfdForPwStateChangeToAdminDown(45),bfdForPwDisable(46),manualSetEnable(47),manualSetDisable(48),delayTimeOut(49),resumeTimeOut(50),vrrpMaster(51),vrrpBackup(52),vrrpInit(53),vrrpDelete(54),vrrpTrack(55),undoVrrpTrack(56),lspPingTimeOut(57),vcDownWhenReceivedNewRLB(58),mtuMatched(59),mtuUnmatched(60),vsiShut(61),vsiResume(62),setAdminVSI(63),undosetAdminVSI(64),bvsiBindAc(65),bvsiUnbindAc(66),ivsiBindBVSI(67),ivsiUnbindBVSI(68),deletedVSI(69),reconstructFwdTable(70),mclagMaster(71),mclagBackup(72),adminPwUp(73),adminPwDown(74),vccvOk(75),vccvFailed(76),localIfnetOk(77),inVcLabelOk(78),localIfnetRelease(79),inVcLabelRelease(80),switchOverEnable(81),switchOverDisable(82),setBVSI(83),undoSetBVSI(84),shutdownBVSI(85),undoShutdownBVSI(86),notificationReceived(87),pwApsSwitch(88),routeUnreachable(89),routeReachable(90),aging(91),verification(92),tdmBitRateMatched(93),tdmBitRateUnmatched(94)}

Read-only

This object indicates the reason of VC switching.

For details, see hwKompellaVcStateChangeReason.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.16

hwKompellaVcLastRerouteTime

INTEGER (0..4294967295)

Read-only

This object indicates the interval between the switchback time and the current time.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.17

hwKompellaVcManualSetFault

INTEGER{true(1),false(2)}

Read-only

The value of this object identifies whether the fault flag is manually set. The object has the following values:

  • 1: true
  • 2: false

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.18

hwKompellaVcIsActive

INTEGER{true(1),false(2)}

Read-only

The value of this object identifies whether the current VC is in the active state. The object has the following values:

  • 1: true
  • 2: false

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.19

hwKompellaACStatus

INTEGER { up(1), down(2), notify(4), notifyDown(5), downNotify(6) }

Read-only

The value of this object identifies the physical status of the AC interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.21

hwKompellaVcBfdDetectMultiplier

INTEGER (0..4294967295)

Read-only

This object indicates the local detection multiple.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.22

hwKompellaVcBfdMinReceiveInterval

INTEGER (0..4294967295)

Read-only

This object indicates the interval to receive BFD packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.23

hwKompellaVcBfdMinTransmitInterval

INTEGER (0..4294967295)

Read-only

This object indicates the interval to send BFD packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.24

hwKompellaVcDynamicBfdDetect

INTEGER{true(1),false(2)}

Read-only

The value of this object identifies whether dynamic BFD for PW is supported.

The object has the following values:

  • 1: true
  • 2: false

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.27

hwKompellaVcPeerAddr

OCTET STRING (SIZE (4))

Read-create

Peer PW address of the BGP VLL

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.51

hwKompellaVcRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status of this table.

Restriction:

  • Before creating this table, you must create the VPN that is specified in hwKompellaVpnName.

    Before creating this table, you must create the CE that is specified in hwKompellaVpnName and hwKompellaCeID.

  • After creating this table, you are unable to modify the configuration.

Currently, the maximum access is read-only.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restraint.

hwKompellaVcTnlTable

This table is used to query the tunnel index of a VC.

The indexes of this table are hwKompellaVpnName, hwKompellaCEID, hwKompellaVcRmtCEID, hwKompellaVcIfIndex, and hwKompellaVcTnlIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.119.2.1.5.1.1

hwKompellaVcTnlIndex

INTEGER (0..4294967295)

Not-accessible

This object indicates the tunnel index of a VC.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.5.1.2

hwKompellaVcTnlType

Integer{LSP(1),GRE(2),L2TP(3), IPSEC(4),CR_LSP (5),}

Read-only
This object indicates the following tunnel types.
  • 1: LSP
  • 2: GRE
  • 3: L2TP
  • 4: IPSec
  • 5: CRLSP

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restraint.

Description of Alarm Objects

hwKompellaVcDown

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.119.2.2.1

hwKompellaVcDown
  • 1: hwKompellaVcSecondary
  • 2: hwKompellaVcStateChangeReason
  • 3: hwKompellaVcTnlPolicyName
  • 4: ActiveState

The alarm is generated when the Kompella primary or secondary VC status changes to Down.

For details, see hwKompellaVcStateChangeReason.

This object is implemented as defined in the corresponding MIB files.

hwKompellaVcUp

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.119.2.2.2

hwKompellaVcUp
  • 1: hwKompellaVcSecondary
  • 2: hwKompellaVcStateChangeReason
  • 3: hwKompellaVcTnlPolicyName
  • 4: ActiveState

The alarm is generated when the Kompella primary or secondary VC status changes to Up.

For details, see hwKompellaVcStateChangeReason.

This object is implemented as defined in the corresponding MIB files.

hwKompellaSwitchWtoP

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.119.2.2.3

hwKompellaSwitchWtoP
  • 1: hwKompellaVcCtrlWord
  • 2: hwKompellaSwitchRmtCeID
  • 3: hwKompellaVcStateChangeReason

An alarm is generated when the PW status changes from working to protect.

For details, see hwKompellaVcStateChangeReason.

This object is implemented as defined in the corresponding MIB files.

hwKompellaSwitchPtoW

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.119.2.2.4

hwKompellaSwitchPtoW
  • 1: hwKompellaVcCtrlWord
  • 2: hwKompellaSwitchRmtCeID
  • 3: hwKompellaVcStateChangeReason

An alarm is generated when the PW status changes from protect to working.

For details, see hwKompellaVcStateChangeReason.

This object is implemented as defined in the corresponding MIB files.

Appendix

hwKompellaVcStateChangeReason

The structure of hwKompellaVcStateChangeReason is as follows:

{
invalidReason(1),
vcCreated(2),
vcDeleted(3),
ldpSessionDown(4),
ldpSessionUp(5),
receivedDifLabelOrMtu(6),
receivedIntfParaMatching(7),
receivedIntfParaUnMatched(8),
receivedUnPassCbitCheck(9),
receivedUnPassPwLoopCheck(10),
receivedNewMapping(11),
receivedNewMappingButRemoteVcDown(12),
receivedWithdrawn(13),
receivedLdpRelease(14),
receivedLdpRequest(15),
ldpGrEndProcessing(16),
receivedRsvpMessage(17),
interfaceUp(18),
interfaceDown(19),
interfaceEncapChanged(20),
refresh(21),
downloadAgain(22),
tunnelUp(23),
tunnelDown(24),
receivedNewRlb(25),
deletedRlb(26),
vcCreatedOrTurnedToAnother(27),
outInterInInvalidState(28),
outInterInValidNow(29),
ldpNotifiForward(30),
ldpNotifiNotForward(31),
pwRestart(32),
downloadFtnAndIlmForEthTrunk(33),
acOamFaultDetectDisable(34),
remoteAcFault(35),
remoteAcFaultResume(36),
localAcFault(37),
localAcFaultResume(38),
remotePsnFault(39),
remotePsnFaultResume(40),
localPsnFault(41),
localPsnFaultResume(42),
bfdForPwStateChangeToDown(43),
bfdForPwStateChangeToUp(44),
bfdForPwStateChangeToAdminDown(45),
bfdForPwDisable(46),
manualSetEnable(47),
manualSetDisable(48),
delayTimeOut(49),
resumeTimeOut(50),
vrrpMaster(51),
vrrpBackup(52),
vrrpInit(53),
vrrpDelete(54),
vrrpTrack(55),
undoVrrpTrack(56),
lspPingTimeOut(57),
vcDownWhenReceivedNewRLB(58),
mtuMatched(59),
mtuUnmatched(60),
vsiShut(61),
vsiResume(62),
setAdminVSI(63),
undosetAdminVSI(64),  
bvsiBindAc(65),
bvsiUnbindAc(66),
ivsiBindBVSI(67),
ivsiUnbindBVSI(68),
deletedVSI(69),
reconstructFwdTable(70),
mclagMaster(71),
mclagBackup(72),
adminPwUp(73),
adminPwDown(74),
vccvOk(75),
vccvFailed(76),
localIfnetOk(77),
inVcLabelOk(78),
localIfnetRelease(79),
inVcLabelRelease(80),
switchOverEnable(81),
switchOverDisable(82),
setBVSI(83),
undoSetBVSI(84),
shutdownBVSI(85),
undoShutdownBVSI(86),
notificationReceived(87),
PWAPSSwitch(88),
routeUnreachable(89)
routeReachable(90),
aging(91),
verification(92)
}

KompellaVpnVcType

The structure of KompellaVpnVcType is as follows:

{
Frame Relay DLCI ( Martini Mode ) (1)
ATM AAL5 SDU VCC transport (2)
ATM transparent cell transport (3)
Ethernet Tagged Mode (4)
Ethernet (5)
HDLC (6)
PPP (7)
SONET/SDH Circuit Emulation Service Over MPLS (CEM) (8)
ATM n-to-one VCC cell transport (9)
ATM n-to-one VPC cell transport (10)
IP Layer2 Transport (11)
ATM one-to-one VCC Cell Mode (12)
ATM one-to-one VPC Cell Mode (13)
ATM AAL5 PDU VCC transport (14)
Frame-Relay Port mode (15)
SONET/SDH Circuit Emulation over Packet (CEP) (16)
Structure-agnostic E1 over Packet (SAE1oP)  (17)
Structure-agnostic T1 (DS1) over Packet (SAT1oP)  (18)
Structure-agnostic E3 over Packet (SAE3oP) (19)
Structure-agnostic T3 (DS3) over Packet (SAT3oP) (20)
CESoPSN basic mode (21)
TDMoIP basic mode (22)
CESoPSN TDM with CAS (23)
TDMoIP TDM with CAS (24)
Frame Relay DLCI (25)
IP-interworking (64)
unknown (255)
}
Translation
简体中文
Download
Updated: 2022-05-25

Document ID: EDOC1100126932

Views: 99388

Downloads: 102

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Digital Signature File

Digital Signature Authentication Mode
Share
Previous Next

Copyright © 2023 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :