No relevant resource is found in the selected language.
Enterprise
Worldwide
Search
Support Documentation
S12700 and S12700E V200R019C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
HUAWEI-E-TRUNK-MIB

HUAWEI-E-TRUNK-MIB

Functions Overview

HUAWEI-E-TRUNK-MIB defined by Huawei describes the following functions: the Multi-Chassis Trunk (E-Trunk) implements the master/backup function and supports VPLS networks; the E-Trunk feature enhances the reliability of the PE's access to the network through PE backup.

Root directory:

iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).huawei(2011).huaweiMgmt(5).hwDatacomm(25).hwETrunkMIB(178)

Relationships Between Tables

Figure 48-1 Relationship between hwETrunkMemberTable and hwETrunkTable

The relationship between hwETrunkTable (the E-Trunk table) and hwETrunkMemberTable (the E-Trunk member table and only Eth-Trunk available) is shown in the figure above. The hwETrunkMemberParentID field in the E-Trunk member structure is the ID of the E-Trunk to which E-Trunk members belong.

Description of Single Objects

None

Description of MIB Tables

hwETrunkTable

In this table, you can query and configure basic attributes of an E-Trunk: the ID of the E-Trunk, system ID, priority, IP addresses of the peer device and local device, timeout period, statistics of packets, and status of the E-Trunk.

The index of this table is hwETrunkId.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.178.1.1.1.1

hwETrunkId

Integer32 (1..128)

Not-accessible

The value of this object identifies an E-Trunk ID.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.1.1.2

hwETrunkSystemId

DisplayString (SIZE (0..255))

Read-only

This object indicates the system ID of the local E-Trunk, that is, the physical address of the Ethernet.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.1.1.3

hwETrunkPri

Integer32 (1..254)

Read-create

The value of this object identifies the priority of local E-Trunk.

By default, the value is 100.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.1.1.4

hwETrunkStatus

INTEGER

Read-only
The value of this object identifies the status of an E-Trunk:

  • 1: Initialization state

  • 2: Backup state

  • 3: Master state

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.1.1.5

hwETrunkStatusReason

INTEGER

Read-only
This object indicates the cause of hwETrunkState:

  • 1: The priority is calculated.

  • 2: The local receiving timer times out.

  • 3: The local BFD session detects that the control link between PEs fails.

  • 4: The peer receiving timer times out.

  • 5: The peer BFD session detects that the control link between PEs fails.

  • 6: The status of all E-Trunk members is Down and then changes to the initialization state.

  • 7: An E-Trunk is created and changes to the initialization state.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.1.1.6

hwETrunkPeerIpAddr

OCTET STRING (SIZE (4))

Read-create

This object indicates the IP address of the peer device.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.1.1.7

hwETrunkSourceIpAddr

OCTET STRING (SIZE (4))

Read-create

This object indicates the IP address of the local device.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.1.1.8

hwETrunkReceiveFailTimeMultiple

Integer32 (3..300)

Read-create

The value of this object identifies the timeout period for the local device to receive packets and it is a multiplier of the period for the local device to send packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.1.1.9

hwETrunkSendPeriod

Integer32 (5..100)

Read-create

The value of this object identifies the period for the local device to send packets. The unit is 100 ms.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.1.1.10

hwETrunkPacketReceive

INTEGER (0..18446744073709551615)

Read-only

The value of this object identifies the number of received packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.1.1.11

hwETrunkPacketSend

INTEGER (0..18446744073709551615)

Read-only

The value of this object identifies the number of sent packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.1.1.12

hwETrunkPacketRecDrop

INTEGER (0..18446744073709551615)

Read-only

The value of this object identifies the number of discarded received packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.1.1.13

hwETrunkPacketSndDrop

INTEGER (0..18446744073709551615)

Read-only

The value of this object identifies the number of discarded received packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.1.1.14

hwETrunkPeerSystemId

DisplayString (SIZE (0..255))

Read-only

This object indicates the system ID of the peer E-Trunk, that is, the physical address of the Ethernet.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.1.1.15

hwETrunkPeerPri

Integer32 (1..254)

Read-only

The value of this object identifies the received priority of the peer E-Trunk.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.1.1.16

hwETrunkPeerReceiveFailTime

Integer32 (15..30000)

Read-only

The value of this object identifies the timeout period for the peer device to receive packets. The unit is 100 ms.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.1.1.17

hwETrunkSecurityKeyType

Integer (1..2)

Read-create
The value of this object indicates the type of the security key:

  • 1: Plain text

  • 2: Cipher text

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.1.1.18

hwETrunkSecurityKey

OCTET STRING (SIZE (0..392))

Read-create

This object indicates an SHA-160 a cipher code used by the E-Trunk. It is a string of 1 to 255 bytes and must be consistent on the two devices. Otherwise, packets are discarded. You can configure hwETrunkSecurityKey [18] with the plain or cipher text, but the obtained value is null.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.1.1.19

hwETrunkBfdSessId

Integer32 (0..8191)

read-only

The value of this object identifies the ID of the BFD session.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.1.1.20

hwETrunkResetCounter

Integer32 (0..0)

Read-create

The counter is reset to 0. The hwETrunkPacketReceive, hwETrunkPacketSend, hwETrunkPacketRecDrop, and hwETrunkPacketSndDrop are deleted.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.1.1.21

hwETrunkRevertTime

Integer32 (0..3600)

Read-create

The value of this object identifies the revert delay of an E-Trunk.

The default value is 120 seconds.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.1.1.22

hwETrunkBfdSessName

STRING (SIZE (0..15))

Read-create

The value of this object identifies the name of the BFD session.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.1.1.50

hwETrunkRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

Before this table is created, hwETrunkID must be specified.

When hwETrunkBfdSessId is configured, the corresponding BFD session is already set up and the BFD session can detect the link between hwETrunkSourceIpAddr and hwETrunkPeerIpAddr.

The BFD session with a specified name must be created before hwETrunkBfdSessName is set. hwETrunkBfdSessName is supported only by static BFD for IPv4.

Modification Restriction

The hwETrunkSecurityKey [18] is a 16-digit hexadecimal number and must be consistent on the two devices. Otherwise, packets are discarded. You can configure hwETrunkSecurityKey [18] in the plain or cipher text. When the encryption type is the cipher text, a 24-byte cipher character string is displayed in query.

If you need to change the hwETrunkPeerIpAddr and hwETrunkSourceIpAddr, you must change them on the devices on two ends of the E-Trunk. Otherwise, packets are discarded.

Deletion Restriction

Before this table is deleted, hwETrunkID must be specified.

If the E-Trunk has one or more members, you must delete its members before deleting the E-Trunk.

Access Restriction

When you read this table, the E-Trunk must exist.

hwETrunkMemberTable

This table describes information about E-Trunk members.

The indexes of this table are hwETrunkMemberType, hwETrunkMemberId, and hwETrunkMemberParentId.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.178.1.2.1.1

hwETrunkMemberParentId

Integer32 (1..128)

Not-accessible

The value of this object identifies the ID of the E-Trunk to which E-Trunk members belong.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.2.1.2

hwETrunkMemberType

Integer32 (1..255)

Not-accessible

The value of this object identifies the type of E-Trunk members.

There is only one member type: Eth-Trunk.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.2.1.3

hwETrunkMemberId

INTEGER (0..4294967295)

Not-accessible

This object indicates the ID of an E-Trunk member.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.2.1.4

hwETrunkMemberStatus

INTEGER

Read-only
The value of this object identifies the master/backup status of a local E-Trunk member:

  • 1: backup

  • 2: master

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.2.1.5

hwETrunkMemberStatusReason

INTEGER

{

forceBackup(1),

forceMaster(2),

etrunkInit(3),

etrunkBackup(4),

etrunkMaster(5),

peerMemberDown(6),

peerMemberUp(7)

}

Read-only
The value of this object identifies the causes why the local E-Trunk member is in this state:

  • 1: The local E-Trunk member works in forcible backup state.

  • 2: The local E-Trunk member works in forcible master state.

  • 3: The local E-Trunk member works in automatic state and the E-Trunk is in the initialization state.

  • 4: The local E-Trunk member works in automatic state and the E-Trunk works in the forcible backup mode.

  • 5: The local E-Trunk member works in automatic state and the E-Trunk works in the forcible master mode.

  • 6: The local E-Trunk member works in automatic state, the E-Trunk is in the forcible backup state and then changes to the forcible master mode when the E-Trunk receives a message that the peer device is faulty (the index of the peer member must be consistent with the index of this member).

  • 7: The local E-Trunk member works in automatic state, the E-Trunk works in the forcible backup mode and then changes to the forcible backup mode because the E-Trunk receives a message that the peer device is faulty (the index of the peer member must be consistent with the index of this member).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.2.1.6

hwETrunkMemberWorkMode

INTEGER

Read-create
The value of this object identifies the work mode:

  • 1: automatic

  • 2: forcible backup

  • 3: forcible master

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.2.1.7

hwETrunkMemberPhyStatus

INTEGER

Read-only
The value of this object identifies the physical link status of a local E-Trunk member:

  • 1: up

  • 2: down

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.178.1.2.1.8

hwETrunkMemberRemoteId

INTEGER (0..4294967295)

Read-create

This object indicates the ID of the remote Eth-Trunk interface.

This object supports the Set operation only when created.

1.3.6.1.4.1.2011.5.25.178.1.2.1.50

hwETrunkMemberRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

At present, hwETrunkMemberType supports Eth-Trunk only.

The E-Trunk needs to query Eth-Trunk to check whether the Trunk with the ID of hwETrunkMemberID exists. If the Eth-Trunk does not contain information about this Trunk, LACP is not enabled, or the Trunk has joined another E-Trunk, creating the Trunk fails.

Check whether the E-Trunk of hwETrunkMemberParentID exists. If not, creating the Trunk fails.

Modification Restriction

Only hwETrunkMemberWorkMode can be modified.

Deletion Restriction

None

Access Restriction

When you read the table, the corresponding member must be present. At present, hwETrunkMemberType supports Eth-Trunk only.

Description of Alarm Objects

hwETrunkStatusChange

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.178.2.1

hwETrunkStatusChange

  • hwETrunkStatus

  • hwETrunkStatusReason

This object indicates that the status or the cause of status of the E-Trunk changes.

This object is implemented as defined in the corresponding MIB files.

hwETrunkMemberStatusChange

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.178.2.2

hwETrunkMemberStatusChange

  • hwETrunkMemberStatus

  • hwETrunkMemberStatusReason

This object indicates the member status or the cause of status changes.

This object is implemented as defined in the corresponding MIB files.
Translation
简体中文
Download
Updated: 2022-05-25

Document ID: EDOC1100126932

Views: 107577

Downloads: 114

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Digital Signature File

Digital Signature Authentication Mode
Share
Previous Next

Copyright © 2023 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :